* [U-Boot] [PATCH 1/2] MX28: config: Allow different target generation in elftosb call
@ 2012-08-15 18:51 Otavio Salvador
2012-08-15 18:51 ` [U-Boot] [PATCH 2/2] MX28: Move "regs-base.h" include after SoC type configuration Otavio Salvador
` (2 more replies)
0 siblings, 3 replies; 6+ messages in thread
From: Otavio Salvador @ 2012-08-15 18:51 UTC (permalink / raw)
To: u-boot
The elftosb call needs to use a target param specific for i.MX28. This
patch allow for later addition of i.MX233.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
---
Makefile | 5 ++++-
arch/arm/cpu/arm926ejs/mxs/{u-boot.bd => u-boot.bd.imx28} | 0
2 files changed, 4 insertions(+), 1 deletion(-)
rename arch/arm/cpu/arm926ejs/mxs/{u-boot.bd => u-boot.bd.imx28} (100%)
diff --git a/Makefile b/Makefile
index f6471e2..5f11bb7 100644
--- a/Makefile
+++ b/Makefile
@@ -452,8 +452,11 @@ $(obj)u-boot.ais: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin
cat $(obj)spl/u-boot-spl-pad.ais $(obj)u-boot.bin > \
$(obj)u-boot.ais
+# Specify the target for use in elftosb call
+ELFTOSB_TARGET-$(CONFIG_MX28) = imx28
+
$(obj)u-boot.sb: $(obj)u-boot.bin $(obj)spl/u-boot-spl.bin
- elftosb -zdf imx28 -c $(TOPDIR)/$(CPUDIR)/$(SOC)/u-boot.bd \
+ elftosb -zdf $(ELFTOSB_TARGET-y) -c $(TOPDIR)/$(CPUDIR)/$(SOC)/u-boot.bd.$(ELFTOSB_TARGET-y) \
-o $(obj)u-boot.sb
# On x600 (SPEAr600) U-Boot is appended to U-Boot SPL.
diff --git a/arch/arm/cpu/arm926ejs/mxs/u-boot.bd b/arch/arm/cpu/arm926ejs/mxs/u-boot.bd.imx28
similarity index 100%
rename from arch/arm/cpu/arm926ejs/mxs/u-boot.bd
rename to arch/arm/cpu/arm926ejs/mxs/u-boot.bd.imx28
--
1.7.10.4
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [U-Boot] [PATCH 2/2] MX28: Move "regs-base.h" include after SoC type configuration
2012-08-15 18:51 [U-Boot] [PATCH 1/2] MX28: config: Allow different target generation in elftosb call Otavio Salvador
@ 2012-08-15 18:51 ` Otavio Salvador
2012-08-17 10:08 ` Stefano Babic
2012-08-18 15:20 ` Marek Vasut
2012-08-17 10:04 ` [U-Boot] [PATCH 1/2] MX28: config: Allow different target generation in elftosb call Stefano Babic
2012-08-18 15:20 ` Marek Vasut
2 siblings, 2 replies; 6+ messages in thread
From: Otavio Salvador @ 2012-08-15 18:51 UTC (permalink / raw)
To: u-boot
For i.MX233 addition the base registers need to be change so the SoC
definition needs to be known before the header include.
The following boards has been changed:
* apx4devkit
* m28evk
* mx28evk
* sc_sps_1
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
---
include/configs/apx4devkit.h | 4 ++--
include/configs/m28evk.h | 4 ++--
include/configs/mx28evk.h | 5 +++--
include/configs/sc_sps_1.h | 4 ++--
4 files changed, 9 insertions(+), 8 deletions(-)
diff --git a/include/configs/apx4devkit.h b/include/configs/apx4devkit.h
index b5ae44f..af0b714 100644
--- a/include/configs/apx4devkit.h
+++ b/include/configs/apx4devkit.h
@@ -22,8 +22,6 @@
#ifndef __CONFIG_H
#define __CONFIG_H
-#include <asm/arch/regs-base.h>
-
/* SoC configurations */
#define CONFIG_MX28 /* i.MX28 SoC */
#define CONFIG_MXS_GPIO /* GPIO control */
@@ -32,6 +30,8 @@
#define MACH_TYPE_APX4DEVKIT 3712
#define CONFIG_MACH_TYPE MACH_TYPE_APX4DEVKIT
+#include <asm/arch/regs-base.h>
+
#define CONFIG_SYS_NO_FLASH
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_ARCH_CPU_INIT
diff --git a/include/configs/m28evk.h b/include/configs/m28evk.h
index b3ac316..91c6bb9 100644
--- a/include/configs/m28evk.h
+++ b/include/configs/m28evk.h
@@ -20,8 +20,6 @@
#ifndef __M28EVK_CONFIG_H__
#define __M28EVK_CONFIG_H__
-#include <asm/arch/regs-base.h>
-
/*
* SoC configurations
*/
@@ -36,6 +34,8 @@
#define CONFIG_MACH_TYPE MACH_TYPE_M28EVK
+#include <asm/arch/regs-base.h>
+
#define CONFIG_SYS_NO_FLASH
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_ARCH_MISC_INIT
diff --git a/include/configs/mx28evk.h b/include/configs/mx28evk.h
index 4e70617..ac06caf 100644
--- a/include/configs/mx28evk.h
+++ b/include/configs/mx28evk.h
@@ -19,17 +19,18 @@
#ifndef __MX28EVK_CONFIG_H__
#define __MX28EVK_CONFIG_H__
-#include <asm/arch/regs-base.h>
-
/*
* SoC configurations
*/
#define CONFIG_MX28 /* i.MX28 SoC */
+
#define CONFIG_MXS_GPIO /* GPIO control */
#define CONFIG_SYS_HZ 1000 /* Ticks per second */
#define CONFIG_MACH_TYPE MACH_TYPE_MX28EVK
+#include <asm/arch/regs-base.h>
+
#define CONFIG_SYS_NO_FLASH
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_ARCH_MISC_INIT
diff --git a/include/configs/sc_sps_1.h b/include/configs/sc_sps_1.h
index f0b6f2b..0ebdfb8 100644
--- a/include/configs/sc_sps_1.h
+++ b/include/configs/sc_sps_1.h
@@ -22,8 +22,6 @@
#ifndef __SC_SPS_1_H__
#define __SC_SPS_1_H__
-#include <asm/arch/regs-base.h>
-
/*
* SoC configurations
*/
@@ -38,6 +36,8 @@
#define CONFIG_MACH_TYPE MACH_TYPE_SC_SPS_1
+#include <asm/arch/regs-base.h>
+
#define CONFIG_SYS_NO_FLASH
#define CONFIG_SYS_ICACHE_OFF
#define CONFIG_SYS_DCACHE_OFF
--
1.7.10.4
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [U-Boot] [PATCH 1/2] MX28: config: Allow different target generation in elftosb call
2012-08-15 18:51 [U-Boot] [PATCH 1/2] MX28: config: Allow different target generation in elftosb call Otavio Salvador
2012-08-15 18:51 ` [U-Boot] [PATCH 2/2] MX28: Move "regs-base.h" include after SoC type configuration Otavio Salvador
@ 2012-08-17 10:04 ` Stefano Babic
2012-08-18 15:20 ` Marek Vasut
2 siblings, 0 replies; 6+ messages in thread
From: Stefano Babic @ 2012-08-17 10:04 UTC (permalink / raw)
To: u-boot
On 15/08/2012 20:51, Otavio Salvador wrote:
> The elftosb call needs to use a target param specific for i.MX28. This
> patch allow for later addition of i.MX233.
>
> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
> ---
> Makefile | 5 ++++-
> arch/arm/cpu/arm926ejs/mxs/{u-boot.bd => u-boot.bd.imx28} | 0
> 2 files changed, 4 insertions(+), 1 deletion(-)
> rename arch/arm/cpu/arm926ejs/mxs/{u-boot.bd => u-boot.bd.imx28} (100%)
>
> diff --git a/Makefile b/Makefile
> index f6471e2..5f11bb7 100644
> --- a/Makefile
> +++ b/Makefile
> @@ -452,8 +452,11 @@ $(obj)u-boot.ais: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin
> cat $(obj)spl/u-boot-spl-pad.ais $(obj)u-boot.bin > \
> $(obj)u-boot.ais
>
> +# Specify the target for use in elftosb call
> +ELFTOSB_TARGET-$(CONFIG_MX28) = imx28
> +
> $(obj)u-boot.sb: $(obj)u-boot.bin $(obj)spl/u-boot-spl.bin
> - elftosb -zdf imx28 -c $(TOPDIR)/$(CPUDIR)/$(SOC)/u-boot.bd \
> + elftosb -zdf $(ELFTOSB_TARGET-y) -c $(TOPDIR)/$(CPUDIR)/$(SOC)/u-boot.bd.$(ELFTOSB_TARGET-y) \
> -o $(obj)u-boot.sb
>
> # On x600 (SPEAr600) U-Boot is appended to U-Boot SPL.
> diff --git a/arch/arm/cpu/arm926ejs/mxs/u-boot.bd b/arch/arm/cpu/arm926ejs/mxs/u-boot.bd.imx28
> similarity index 100%
> rename from arch/arm/cpu/arm926ejs/mxs/u-boot.bd
> rename to arch/arm/cpu/arm926ejs/mxs/u-boot.bd.imx28
IMHO it looks good
Acked-by: Stefano Babic <sbabic@denx.de>
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 6+ messages in thread
* [U-Boot] [PATCH 2/2] MX28: Move "regs-base.h" include after SoC type configuration
2012-08-15 18:51 ` [U-Boot] [PATCH 2/2] MX28: Move "regs-base.h" include after SoC type configuration Otavio Salvador
@ 2012-08-17 10:08 ` Stefano Babic
2012-08-18 15:20 ` Marek Vasut
1 sibling, 0 replies; 6+ messages in thread
From: Stefano Babic @ 2012-08-17 10:08 UTC (permalink / raw)
To: u-boot
On 15/08/2012 20:51, Otavio Salvador wrote:
> For i.MX233 addition the base registers need to be change so the SoC
> definition needs to be known before the header include.
>
> The following boards has been changed:
>
> * apx4devkit
> * m28evk
> * mx28evk
> * sc_sps_1
>
> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
> ---
> include/configs/apx4devkit.h | 4 ++--
> include/configs/m28evk.h | 4 ++--
> include/configs/mx28evk.h | 5 +++--
> include/configs/sc_sps_1.h | 4 ++--
> 4 files changed, 9 insertions(+), 8 deletions(-)
>
> diff --git a/include/configs/apx4devkit.h b/include/configs/apx4devkit.h
> index b5ae44f..af0b714 100644
> --- a/include/configs/apx4devkit.h
> +++ b/include/configs/apx4devkit.h
> @@ -22,8 +22,6 @@
> #ifndef __CONFIG_H
> #define __CONFIG_H
>
> -#include <asm/arch/regs-base.h>
We use the same "trick" for i.MX5.
You miss Veli-Pekka as maintainer for apx4devkit, I have added it, but
you get here my:
Acked-by: Stefano Babic <sbabic@denx.de>
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 6+ messages in thread
* [U-Boot] [PATCH 1/2] MX28: config: Allow different target generation in elftosb call
2012-08-15 18:51 [U-Boot] [PATCH 1/2] MX28: config: Allow different target generation in elftosb call Otavio Salvador
2012-08-15 18:51 ` [U-Boot] [PATCH 2/2] MX28: Move "regs-base.h" include after SoC type configuration Otavio Salvador
2012-08-17 10:04 ` [U-Boot] [PATCH 1/2] MX28: config: Allow different target generation in elftosb call Stefano Babic
@ 2012-08-18 15:20 ` Marek Vasut
2 siblings, 0 replies; 6+ messages in thread
From: Marek Vasut @ 2012-08-18 15:20 UTC (permalink / raw)
To: u-boot
Dear Otavio Salvador,
> The elftosb call needs to use a target param specific for i.MX28. This
> patch allow for later addition of i.MX233.
>
> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
> ---
> Makefile | 5 ++++-
> arch/arm/cpu/arm926ejs/mxs/{u-boot.bd => u-boot.bd.imx28} | 0
> 2 files changed, 4 insertions(+), 1 deletion(-)
> rename arch/arm/cpu/arm926ejs/mxs/{u-boot.bd => u-boot.bd.imx28} (100%)
>
> diff --git a/Makefile b/Makefile
> index f6471e2..5f11bb7 100644
> --- a/Makefile
> +++ b/Makefile
> @@ -452,8 +452,11 @@ $(obj)u-boot.ais: $(obj)spl/u-boot-spl.bin
> $(obj)u-boot.bin cat $(obj)spl/u-boot-spl-pad.ais $(obj)u-boot.bin > \
> $(obj)u-boot.ais
>
> +# Specify the target for use in elftosb call
> +ELFTOSB_TARGET-$(CONFIG_MX28) = imx28
> +
> $(obj)u-boot.sb: $(obj)u-boot.bin $(obj)spl/u-boot-spl.bin
> - elftosb -zdf imx28 -c $(TOPDIR)/$(CPUDIR)/$(SOC)/u-boot.bd \
> + elftosb -zdf $(ELFTOSB_TARGET-y) -c
> $(TOPDIR)/$(CPUDIR)/$(SOC)/u-boot.bd.$(ELFTOSB_TARGET-y) \ -o
> $(obj)u-boot.sb
Swap this to u-boot.$(ELFTOSB_TARGET-y).bd ... so the .bd suffix is always at
the end.
>
> # On x600 (SPEAr600) U-Boot is appended to U-Boot SPL.
> diff --git a/arch/arm/cpu/arm926ejs/mxs/u-boot.bd
> b/arch/arm/cpu/arm926ejs/mxs/u-boot.bd.imx28 similarity index 100%
> rename from arch/arm/cpu/arm926ejs/mxs/u-boot.bd
> rename to arch/arm/cpu/arm926ejs/mxs/u-boot.bd.imx28
Best regards,
Marek Vasut
^ permalink raw reply [flat|nested] 6+ messages in thread
* [U-Boot] [PATCH 2/2] MX28: Move "regs-base.h" include after SoC type configuration
2012-08-15 18:51 ` [U-Boot] [PATCH 2/2] MX28: Move "regs-base.h" include after SoC type configuration Otavio Salvador
2012-08-17 10:08 ` Stefano Babic
@ 2012-08-18 15:20 ` Marek Vasut
1 sibling, 0 replies; 6+ messages in thread
From: Marek Vasut @ 2012-08-18 15:20 UTC (permalink / raw)
To: u-boot
Dear Otavio Salvador,
> For i.MX233 addition the base registers need to be change so the SoC
> definition needs to be known before the header include.
>
> The following boards has been changed:
>
> * apx4devkit
> * m28evk
> * mx28evk
> * sc_sps_1
>
> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
> ---
> include/configs/apx4devkit.h | 4 ++--
> include/configs/m28evk.h | 4 ++--
> include/configs/mx28evk.h | 5 +++--
> include/configs/sc_sps_1.h | 4 ++--
> 4 files changed, 9 insertions(+), 8 deletions(-)
Seems ok to me
Best regards,
Marek Vasut
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2012-08-18 15:20 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-08-15 18:51 [U-Boot] [PATCH 1/2] MX28: config: Allow different target generation in elftosb call Otavio Salvador
2012-08-15 18:51 ` [U-Boot] [PATCH 2/2] MX28: Move "regs-base.h" include after SoC type configuration Otavio Salvador
2012-08-17 10:08 ` Stefano Babic
2012-08-18 15:20 ` Marek Vasut
2012-08-17 10:04 ` [U-Boot] [PATCH 1/2] MX28: config: Allow different target generation in elftosb call Stefano Babic
2012-08-18 15:20 ` Marek Vasut
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox