[U-Boot] [PATCH 2/2] MX28: Shuffle around the power management code

[Stefano Babic <sbabic@denx.de>]

On 06/08/2012 23:34, Marek Vasut wrote:
> Move some function calls to a more appropriate place, so they're
> called only when needed.
> 
> Signed-off-by: Marek Vasut <marex@denx.de>
> Cc: Stefano Babic <sbabic@denx.de>
> Cc: Fabio Estevam <fabio.estevam@freescale.com>
> ---
>  arch/arm/cpu/arm926ejs/mx28/spl_power_init.c |    9 +++------
>  1 file changed, 3 insertions(+), 6 deletions(-)
> 
> diff --git a/arch/arm/cpu/arm926ejs/mx28/spl_power_init.c b/arch/arm/cpu/arm926ejs/mx28/spl_power_init.c
> index 4b09b0c..e06e6d6 100644
> --- a/arch/arm/cpu/arm926ejs/mx28/spl_power_init.c
> +++ b/arch/arm/cpu/arm926ejs/mx28/spl_power_init.c
> @@ -657,17 +657,14 @@ void mx28_power_configure_power_source(void)
>  
>  	mx28_src_power_init();
>  
> -	batt_ready = mx28_is_batt_ready();
> -
>  	if (readl(&power_regs->hw_power_sts) & POWER_STS_VDD5V_GT_VDDIO) {
> -		batt_good = mx28_is_batt_good();
> +		batt_ready = mx28_is_batt_ready();
>  		if (batt_ready) {
>  			/* 5V source detected, good battery detected. */
>  			mx28_batt_boot();
>  		} else {
> -			if (batt_good) {
> -				/* 5V source detected, low battery detceted. */
> -			} else {
> +			batt_good = mx28_is_batt_good();
> +			if (!batt_good) {
>  				/* 5V source detected, bad battery detected. */
>  				writel(LRADC_CONVERSION_AUTOMATIC,
>  					&lradc_regs->hw_lradc_conversion_clr);
> 

Applied to u-boot-imx, thanks.

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================