[U-Boot] [PATCH v2] mx5/6: Fix cpu_mmc_init() return value

[Stefano Babic <sbabic@denx.de>]

On 17/08/2012 22:42, Beno?t Th?baudeau wrote:
> Do not pretend to have initialized mmc successfully if CONFIG_FSL_ESDHC is not
> defined. Instead, only implement a custom cpu_mmc_init() when it does something.
> 
> Signed-off-by: Beno?t Th?baudeau <benoit.thebaudeau@advansee.com>
> Cc: Stefano Babic <sbabic@denx.de>
> ---
> Changes for v2:
>  - Do not define cpu_mmc_init() if CONFIG_FSL_ESDHC is not defined.
> 
>  .../arch/arm/cpu/armv7/imx-common/cpu.c            |    6 ++----
>  1 file changed, 2 insertions(+), 4 deletions(-)
> 
> diff --git u-boot-4d3c95f.orig/arch/arm/cpu/armv7/imx-common/cpu.c u-boot-4d3c95f/arch/arm/cpu/armv7/imx-common/cpu.c
> index b3195dd..7313fc0 100644
> --- u-boot-4d3c95f.orig/arch/arm/cpu/armv7/imx-common/cpu.c
> +++ u-boot-4d3c95f/arch/arm/cpu/armv7/imx-common/cpu.c
> @@ -111,18 +111,16 @@ int cpu_eth_init(bd_t *bis)
>  	return rc;
>  }
>  
> +#ifdef CONFIG_FSL_ESDHC
>  /*
>   * Initializes on-chip MMC controllers.
>   * to override, implement board_mmc_init()
>   */
>  int cpu_mmc_init(bd_t *bis)
>  {
> -#ifdef CONFIG_FSL_ESDHC
>  	return fsl_esdhc_mmc_init(bis);
> -#else
> -	return 0;
> -#endif
>  }
> +#endif
>  
>  void reset_cpu(ulong addr)
>  {
> 
Applied to u-boot-imx, thanks.

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================