[U-Boot] [PATCH 3/3] tegra20: add USB ULPI init code

[Stephen Warren <swarren@wwwdotorg.org>]

On 08/19/2012 10:08 AM, Lucas Stach wrote:
> This adds the required code to set up a ULPI USB port. It is
> mostly a port of the Linux ULPI setup code with some tweaks
> added for more correctness, discovered along the way of
> debugging this.
> 
> To use this both CONFIG_USB_ULPI and CONFIG_USB_ULPI_VIEWPORT
> have to be set in the board configuration file.

> diff --git a/arch/arm/cpu/armv7/tegra20/usb.c b/arch/arm/cpu/armv7/tegra20/usb.c

> -/* set up the USB controller with the parameters provided */
> -static int init_usb_controller(struct fdt_usb *config,
> +/* set up the UTMI USB controller with the parameters provided */
> +static int init_utmi_usb_controller(struct fdt_usb *config,
>  				struct usb_ctlr *usbctlr, const u32 timing[])
...
> +#ifdef CONFIG_USB_ULPI
> +/* set up the ULPI USB controller with the parameters provided */
> +static int init_ulpi_usb_controller(struct fdt_usb *config,
> +                                    struct usb_ctlr *usbctlr)

I'm not sure why there's a CONFIG_USB_ULPI and not a matching
CONFIG_USB_UTMI; it seems rather unbalanced, but anyway...

Aside from that, I don't have any other obvious objections to this.