From mboxrd@z Thu Jan 1 00:00:00 1970 From: Bill Date: Tue, 21 Aug 2012 09:35:15 -0500 Subject: [U-Boot] Configure U-boot to output to LCD on imx28evk board In-Reply-To: References: <50296132.2010704@techsi.com> <50339943.9030205@techsi.com> Message-ID: <50339CA3.3030900@techsi.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Thanks. I'm a bit fuzzy on Linux graphics. So you mention that this is possible - but what criteria? Does this mean all I need to do is configure U-boot? Or you mention that there is no mxs framebuffer support. Is there a way around this in u-boot? Or can I add a patch for mxs framebuffer support in U-boot? On 8/21/2012 9:25 AM, Fabio Estevam wrote: > Hi Bill, > > On Tue, Aug 21, 2012 at 11:20 AM, Bill wrote: >> All, >> >> Is it possible to configure u-boot output (console) to the LCD on the >> imx28evk board? I see in the u-boot configuration options switches for LCD >> support: CONFIG_LCD. However, I don't see an LCD display that matches the >> one on the imx28evk? > Yes, this is possible, but currently there is no mxs framebuffer > support in U-boot. > > Regards, > > Fabio Estevam -- William (Bill) L. Sousan, Ph.D. (w) 402.331.4977 ext. 4002 bsousan at techsi.com Technical Support Inc. 11253 John Galt Blvd Omaha, NE 68137 www.techsi.com 8(a) SDB Certified, ISO 9001:2008