[U-Boot] [PATCH v2 1/3] mx53loco: Use IMX_GPIO_NR macro

[U-Boot] [PATCH v2 1/3] mx53loco: Use IMX_GPIO_NR macro

[Fabio Estevam]

From: Fabio Estevam <fabio.estevam@freescale.com>

Use IMX_GPIO_NR macro.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
---
Changes since v1:
- Remove unnecessary comment
 board/freescale/mx53loco/mx53loco.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/board/freescale/mx53loco/mx53loco.c b/board/freescale/mx53loco/mx53loco.c
index 7cfb3f4..3a39c3e 100644
--- a/board/freescale/mx53loco/mx53loco.c
+++ b/board/freescale/mx53loco/mx53loco.c
@@ -42,7 +42,7 @@
 #include <linux/fb.h>
 #include <ipu_pixfmt.h>
 
-#define MX53LOCO_LCD_POWER		(2 * 32 + 24)	/* GPIO3_24 */
+#define MX53LOCO_LCD_POWER		IMX_GPIO_NR(3, 24)
 
 DECLARE_GLOBAL_DATA_PTR;
 
-- 
1.7.9.5

[U-Boot] [PATCH v2 2/3] mx51evk: Use IMX_GPIO_NR macro

[Fabio Estevam]

From: Fabio Estevam <fabio.estevam@freescale.com>

Use IMX_GPIO_NR macro.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
---
Changes since v1:
- Remove unnecessary comment
 board/freescale/mx51evk/mx51evk.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/board/freescale/mx51evk/mx51evk.c b/board/freescale/mx51evk/mx51evk.c
index 97c8a2c..651b506 100644
--- a/board/freescale/mx51evk/mx51evk.c
+++ b/board/freescale/mx51evk/mx51evk.c
@@ -39,9 +39,9 @@
 #include <linux/fb.h>
 #include <ipu_pixfmt.h>
 
-#define MX51EVK_LCD_3V3		(3 * 32 + 9)	/* GPIO4_9 */
-#define MX51EVK_LCD_5V		(3 * 32 + 10)	/* GPIO4_10 */
-#define MX51EVK_LCD_BACKLIGHT	(2 * 32 + 4)	/* GPIO3_4 */
+#define MX51EVK_LCD_3V3		IMX_GPIO_NR(4, 9)
+#define MX51EVK_LCD_5V		IMX_GPIO_NR(4, 10)
+#define MX51EVK_LCD_BACKLIGHT	IMX_GPIO_NR(3, 4)
 
 DECLARE_GLOBAL_DATA_PTR;
 
-- 
1.7.9.5

[U-Boot] [PATCH v2 3/3] mx53ard: Use IMX_GPIO_NR macro

[Fabio Estevam]

From: Fabio Estevam <fabio.estevam@freescale.com>

Use IMX_GPIO_NR macro.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
---
Changes since v1:
- Remove unnecessary comment
 board/freescale/mx53ard/mx53ard.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/board/freescale/mx53ard/mx53ard.c b/board/freescale/mx53ard/mx53ard.c
index 2d21584..688cff1 100644
--- a/board/freescale/mx53ard/mx53ard.c
+++ b/board/freescale/mx53ard/mx53ard.c
@@ -33,7 +33,7 @@
 #include <fsl_esdhc.h>
 #include <asm/gpio.h>
 
-#define ETHERNET_INT		(1 * 32 + 31)  /* GPIO2_31 */
+#define ETHERNET_INT		IMX_GPIO_NR(2, 31)
 
 DECLARE_GLOBAL_DATA_PTR;
 
-- 
1.7.9.5

[U-Boot] [PATCH v2 1/3] mx53loco: Use IMX_GPIO_NR macro

[Stefano Babic]

On 21/08/2012 22:01, Fabio Estevam wrote:
> From: Fabio Estevam <fabio.estevam@freescale.com>
> 
> Use IMX_GPIO_NR macro.
> 
> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
> ---
> Changes since v1:
> - Remove unnecessary comment
>  board/freescale/mx53loco/mx53loco.c |    2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/board/freescale/mx53loco/mx53loco.c b/board/freescale/mx53loco/mx53loco.c
> index 7cfb3f4..3a39c3e 100644
> --- a/board/freescale/mx53loco/mx53loco.c
> +++ b/board/freescale/mx53loco/mx53loco.c
> @@ -42,7 +42,7 @@
>  #include <linux/fb.h>
>  #include <ipu_pixfmt.h>
>  
> -#define MX53LOCO_LCD_POWER		(2 * 32 + 24)	/* GPIO3_24 */
> +#define MX53LOCO_LCD_POWER		IMX_GPIO_NR(3, 24)
>  
>  DECLARE_GLOBAL_DATA_PTR;
>  
> 

Applied (whole series) to u-boot-imx (after removing "Use IMX_GPIO_NR
macro." as suggested by Troy), thanks.

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================