[U-Boot] [PATCH v2 1/3] mx53loco: Use IMX_GPIO_NR macro

Stefano Babic
2012-08-23T09:06:11Z

On 21/08/2012 22:01, Fabio Estevam wrote:
> From: Fabio Estevam <fabio.estevam@freescale.com>
>
> Use IMX_GPIO_NR macro.
>
> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
> ---
> Changes since v1:
> - Remove unnecessary comment
> board/freescale/mx53loco/mx53loco.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/board/freescale/mx53loco/mx53loco.c b/board/freescale/mx53loco/mx53loco.c
> index 7cfb3f4..3a39c3e 100644
> --- a/board/freescale/mx53loco/mx53loco.c
> +++ b/board/freescale/mx53loco/mx53loco.c
> @@ -42,7 +42,7 @@
> #include <linux/fb.h>
> #include <ipu_pixfmt.h>
>
> -#define MX53LOCO_LCD_POWER (2 * 32 + 24) /* GPIO3_24 */
> +#define MX53LOCO_LCD_POWER IMX_GPIO_NR(3, 24)
>
> DECLARE_GLOBAL_DATA_PTR;
>
>

Applied (whole series) to u-boot-imx (after removing "Use IMX_GPIO_NR
macro." as suggested by Troy), thanks.

Best regards,
Stefano Babic

--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================