From mboxrd@z Thu Jan 1 00:00:00 1970 From: Ashok Date: Thu, 23 Aug 2012 21:41:19 +0530 Subject: [U-Boot] [PATCH] mx6qarm2:Use IMX_GPIO_NR macro Message-ID: <50365627.6010807@gmail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de From 0a92ab264ca7f87f198afe401bc552000fe2bd12 Mon Sep 17 00:00:00 2001 From: Ashok Kumar Reddy Date: Thu, 23 Aug 2012 21:01:34 +0530 Subject: [PATCH] mx6qarm2:Use IMX_GPIO_NR macro Signed-off-by: Ashok Kumar Reddy --- board/freescale/mx6qarm2/mx6qarm2.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/board/freescale/mx6qarm2/mx6qarm2.c b/board/freescale/mx6qarm2/mx6qarm2.c index 340c4c4..3218993 100644 --- a/board/freescale/mx6qarm2/mx6qarm2.c +++ b/board/freescale/mx6qarm2/mx6qarm2.c @@ -126,8 +126,8 @@ int board_mmc_getcd(struct mmc *mmc) int ret; if (cfg->esdhc_base == USDHC3_BASE_ADDR) { - gpio_direction_input(171); /*GPIO6_11*/ - ret = !gpio_get_value(171); + gpio_direction_input(IMX_GPIO_NR(6,11)); + ret = !gpio_get_value(IMX_GPIO_NR(6,11)); } else /* Don't have the CD GPIO pin on board */ ret = 1; -- 1.7.9.5