From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefano Babic Date: Thu, 23 Aug 2012 18:39:01 +0200 Subject: [U-Boot] [PATCH] mx6qarm2:Use IMX_GPIO_NR macro In-Reply-To: <50365627.6010807@gmail.com> References: <50365627.6010807@gmail.com> Message-ID: <50365CA5.4070603@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 23/08/2012 18:11, Ashok wrote: > From 0a92ab264ca7f87f198afe401bc552000fe2bd12 Mon Sep 17 00:00:00 2001 > From: Ashok Kumar Reddy > Date: Thu, 23 Aug 2012 21:01:34 +0530 > Subject: [PATCH] mx6qarm2:Use IMX_GPIO_NR macro > > Signed-off-by: Ashok Kumar Reddy > --- > board/freescale/mx6qarm2/mx6qarm2.c | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/board/freescale/mx6qarm2/mx6qarm2.c > b/board/freescale/mx6qarm2/mx6qarm2.c > index 340c4c4..3218993 100644 > --- a/board/freescale/mx6qarm2/mx6qarm2.c > +++ b/board/freescale/mx6qarm2/mx6qarm2.c > @@ -126,8 +126,8 @@ int board_mmc_getcd(struct mmc *mmc) > int ret; > > if (cfg->esdhc_base == USDHC3_BASE_ADDR) { > - gpio_direction_input(171); /*GPIO6_11*/ > - ret = !gpio_get_value(171); > + gpio_direction_input(IMX_GPIO_NR(6,11)); > + ret = !gpio_get_value(IMX_GPIO_NR(6,11)); > } else /* Don't have the CD GPIO pin on board */ > ret = 1; > Acked-by: Stefano Babic Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================