From: Ashok <ashokkourla2000@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] mx5:Use IMX_GPIO_NR macro
Date: Thu, 23 Aug 2012 22:13:57 +0530 [thread overview]
Message-ID: <50365DCD.2080408@gmail.com> (raw)
From 9f76cd6a79c6595fc058e9103d9d4eebd138a2af Mon Sep 17 00:00:00 2001
From: Ashok Kumar Reddy <ashokkourla2000@gmail.com>
Date: Thu, 23 Aug 2012 21:24:53 +0530
Subject: [PATCH] mx5:Use IMX_GPIO_NR macro
Signed-off-by: Ashok Kumar Reddy <ashokkourla2000@gmail.com>
---
board/freescale/mx51evk/mx51evk.c | 12 ++++++------
board/freescale/mx53ard/mx53ard.c | 8 ++++----
board/freescale/mx53evk/mx53evk.c | 8 ++++----
board/freescale/mx53loco/mx53loco.c | 8 ++++----
board/freescale/mx53smd/mx53smd.c | 4 ++--
5 files changed, 20 insertions(+), 20 deletions(-)
diff --git a/board/freescale/mx51evk/mx51evk.c
b/board/freescale/mx51evk/mx51evk.c
index 514a7ac..55cdbed 100644
--- a/board/freescale/mx51evk/mx51evk.c
+++ b/board/freescale/mx51evk/mx51evk.c
@@ -319,11 +319,11 @@ static void power_init(void)
pmic_reg_write(p, REG_MODE_1, val);
mxc_request_iomux(MX51_PIN_EIM_A20, IOMUX_CONFIG_ALT1);
- gpio_direction_output(46, 0);
+ gpio_direction_output(IMX_GPIO_NR(2,14), 0);
udelay(500);
- gpio_set_value(46, 1);
+ gpio_set_value(IMX_GPIO_NR(2,14), 1);
}
#ifdef CONFIG_FSL_ESDHC
@@ -333,14 +333,14 @@ int board_mmc_getcd(struct mmc *mmc)
int ret;
mxc_request_iomux(MX51_PIN_GPIO1_0, IOMUX_CONFIG_ALT1);
- gpio_direction_input(0);
+ gpio_direction_input(IMX_GPIO_NR(1,0));
mxc_request_iomux(MX51_PIN_GPIO1_6, IOMUX_CONFIG_ALT0);
- gpio_direction_input(6);
+ gpio_direction_input(IMX_GPIO_NR(1,6));
if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR)
- ret = !gpio_get_value(0);
+ ret = !gpio_get_value(IMX_GPIO_NR(1,0));
else
- ret = !gpio_get_value(6);
+ ret = !gpio_get_value(IMX_GPIO_NR(1,6));
return ret;
}
diff --git a/board/freescale/mx53ard/mx53ard.c
b/board/freescale/mx53ard/mx53ard.c
index 2d21584..ee5bd43 100644
--- a/board/freescale/mx53ard/mx53ard.c
+++ b/board/freescale/mx53ard/mx53ard.c
@@ -89,14 +89,14 @@ int board_mmc_getcd(struct mmc *mmc)
int ret;
mxc_request_iomux(MX53_PIN_GPIO_1, IOMUX_CONFIG_ALT1);
- gpio_direction_input(1);
+ gpio_direction_input(IMX_GPIO_NR(1,1));
mxc_request_iomux(MX53_PIN_GPIO_4, IOMUX_CONFIG_ALT1);
- gpio_direction_input(4);
+ gpio_direction_input(IMX_GPIO_NR(1,4));
if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR)
- ret = !gpio_get_value(1); /* GPIO1_1 */
+ ret = !gpio_get_value(IMX_GPIO_NR(1,1));
else
- ret = !gpio_get_value(4); /* GPIO1_4 */
+ ret = !gpio_get_value(IMX_GPIO_NR(1,4));
return ret;
}
diff --git a/board/freescale/mx53evk/mx53evk.c
b/board/freescale/mx53evk/mx53evk.c
index 8a6e31d..ed23e28 100644
--- a/board/freescale/mx53evk/mx53evk.c
+++ b/board/freescale/mx53evk/mx53evk.c
@@ -214,14 +214,14 @@ int board_mmc_getcd(struct mmc *mmc)
int ret;
mxc_request_iomux(MX53_PIN_EIM_DA11, IOMUX_CONFIG_ALT1);
- gpio_direction_input(75);
+ gpio_direction_input(IMX_GPIO_NR(3,11));
mxc_request_iomux(MX53_PIN_EIM_DA13, IOMUX_CONFIG_ALT1);
- gpio_direction_input(77);
+ gpio_direction_input(IMX_GPIO_NR(3,13));
if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR)
- ret = !gpio_get_value(77); /* GPIO3_13 */
+ ret = !gpio_get_value(IMX_GPIO_NR(3,13));
else
- ret = !gpio_get_value(75); /* GPIO3_11 */
+ ret = !gpio_get_value(IMX_GPIO_NR(3,11));
return ret;
}
diff --git a/board/freescale/mx53loco/mx53loco.c
b/board/freescale/mx53loco/mx53loco.c
index cbdcfad..8cb9bd9 100644
--- a/board/freescale/mx53loco/mx53loco.c
+++ b/board/freescale/mx53loco/mx53loco.c
@@ -175,14 +175,14 @@ int board_mmc_getcd(struct mmc *mmc)
int ret;
mxc_request_iomux(MX53_PIN_EIM_DA11, IOMUX_CONFIG_ALT1);
- gpio_direction_input(75);
+ gpio_direction_input(IMX_GPIO_NR(3,11));
mxc_request_iomux(MX53_PIN_EIM_DA13, IOMUX_CONFIG_ALT1);
- gpio_direction_input(77);
+ gpio_direction_input(IMX_GPIO_NR(3,13));
if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR)
- ret = !gpio_get_value(77); /* GPIO3_13 */
+ ret = !gpio_get_value(IMX_GPIO_NR(3,13));
else
- ret = !gpio_get_value(75); /* GPIO3_11 */
+ ret = !gpio_get_value(IMX_GPIO_NR(3,11));
return ret;
}
diff --git a/board/freescale/mx53smd/mx53smd.c
b/board/freescale/mx53smd/mx53smd.c
index c237980..cca9e99 100644
--- a/board/freescale/mx53smd/mx53smd.c
+++ b/board/freescale/mx53smd/mx53smd.c
@@ -135,8 +135,8 @@ struct fsl_esdhc_cfg esdhc_cfg[1] = {
int board_mmc_getcd(struct mmc *mmc)
{
mxc_request_iomux(MX53_PIN_EIM_DA13, IOMUX_CONFIG_ALT1);
- gpio_direction_input(77);
- return !gpio_get_value(77); /* GPIO3_13 */
+ gpio_direction_input(IMX_GPIO_NR(3,13));
+ return !gpio_get_value(IMX_GPIO_NR(3,13));
}
int board_mmc_init(bd_t *bis)
--
1.7.9.5
next reply other threads:[~2012-08-23 16:43 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-23 16:43 Ashok [this message]
2012-08-23 16:47 ` [U-Boot] [PATCH] mx5:Use IMX_GPIO_NR macro Fabio Estevam
2012-08-27 6:04 ` Stefano Babic
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=50365DCD.2080408@gmail.com \
--to=ashokkourla2000@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox