[U-Boot] [PATCH] powerpc: Fix declaration type for I/O functions

[Scott Wood <scottwood@freescale.com>]

On 08/23/2012 12:24 PM, Andy Fleming wrote:
> This patch (commit 20959471b5d07fdeb8603b918d80385aa2954711),
> strangely, causes the error below to happen when I build
> P1010RDB_36BIT_NAND:
> 
> Configuring for P1010RDB_36BIT_NAND - Board: P1010RDB, Options: P1010RDB,36BIT,N
> AND
> make[1]: *** [/local/afleming/u-boot/nand_spl/u-boot-spl] Error 1
> make: *** [nand_spl] Error 2
> /opt/freescale/usr/local/gcc-4.5.55-eglibc-2.11.55/powerpc-linux-gnu/bin/powerpc
> -linux-gnu-size: './u-boot': No such file
> /opt/freescale/usr/local/gcc-4.5.55-eglibc-2.11.55/powerpc-linux-gnu/bin/powerpc
> -linux-gnu-ld: section .bootpg loaded at [00000000ff801000,00000000ff80120f] ove
> rlaps section .data loaded at [00000000ff800e90,00000000ff80102b]
> make[1]: *** [/local/afleming/u-boot/nand_spl/u-boot-spl] Error 1
> make: *** [nand_spl] Error 2
> make: *** Waiting for unfinished jobs....
> 
> ${CROSS_COMPILE}gcc --version:
> powerpc-linux-gnu-gcc (Sourcery G++ Lite 2010.09-55) 4.5.1
> 
> I'm guessing this change increased the amount of inlining. Sadly, the
> subsequent patches, which were intended to shrink the SPL build, were
> not enough to fix this problem.
> 
> My inclination is to revert this patch until we figure out what went wrong.
> 
> On Wed, Apr 11, 2012 at 3:49 AM, Prabhakar Kushwaha
> <prabhakar@freescale.com> wrote:
>> Prototype declaration of I/O operation functions are not correct. as both
>> 'extern' and function definition are at same place.
>>
>> Chage protoype declaration as static.
>>
>> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
> 

It builds OK for me using that same toolchain.  What SHA1 are you building?

-Scott