From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefano Babic Date: Mon, 27 Aug 2012 07:48:43 +0200 Subject: [U-Boot] [PATCH v2] mx5: add iomux-mx51.h include In-Reply-To: <1345663446-26597-1-git-send-email-matt@genesi-usa.com> References: <1345663446-26597-1-git-send-email-matt@genesi-usa.com> Message-ID: <503B0A3B.7020503@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 22/08/2012 21:24, Matt Sealey wrote: > Allow usage of the imx-common/iomux-v3.h framework by including pad settings > for the i.MX51. The content of the file is taken from Linux kernel at > commit 5d23b39 plus the required changes to make it work in U-Boot. > > The contained pad settings are the minimum required to make an Efika MX boot > and get all the currently-implemented peripherals working in U-Boot. > > It is recommended that this file not be just a dumping ground for pins but > only contain the settings required for all the boards using it. > > Changes for v2: > * reference commit id from Linux kernel > * additionally roll in the USB pads > * removed GPIO_NUMBER define > > Signed-off-by: Matt Sealey > --- Applied to u-boot-imx, thanks. Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================