* [U-Boot] [PATCH] mx5:Use IMX_GPIO_NR macro
@ 2012-08-23 16:43 Ashok
2012-08-23 16:47 ` Fabio Estevam
2012-08-27 6:04 ` Stefano Babic
0 siblings, 2 replies; 3+ messages in thread
From: Ashok @ 2012-08-23 16:43 UTC (permalink / raw)
To: u-boot
From 9f76cd6a79c6595fc058e9103d9d4eebd138a2af Mon Sep 17 00:00:00 2001
From: Ashok Kumar Reddy <ashokkourla2000@gmail.com>
Date: Thu, 23 Aug 2012 21:24:53 +0530
Subject: [PATCH] mx5:Use IMX_GPIO_NR macro
Signed-off-by: Ashok Kumar Reddy <ashokkourla2000@gmail.com>
---
board/freescale/mx51evk/mx51evk.c | 12 ++++++------
board/freescale/mx53ard/mx53ard.c | 8 ++++----
board/freescale/mx53evk/mx53evk.c | 8 ++++----
board/freescale/mx53loco/mx53loco.c | 8 ++++----
board/freescale/mx53smd/mx53smd.c | 4 ++--
5 files changed, 20 insertions(+), 20 deletions(-)
diff --git a/board/freescale/mx51evk/mx51evk.c
b/board/freescale/mx51evk/mx51evk.c
index 514a7ac..55cdbed 100644
--- a/board/freescale/mx51evk/mx51evk.c
+++ b/board/freescale/mx51evk/mx51evk.c
@@ -319,11 +319,11 @@ static void power_init(void)
pmic_reg_write(p, REG_MODE_1, val);
mxc_request_iomux(MX51_PIN_EIM_A20, IOMUX_CONFIG_ALT1);
- gpio_direction_output(46, 0);
+ gpio_direction_output(IMX_GPIO_NR(2,14), 0);
udelay(500);
- gpio_set_value(46, 1);
+ gpio_set_value(IMX_GPIO_NR(2,14), 1);
}
#ifdef CONFIG_FSL_ESDHC
@@ -333,14 +333,14 @@ int board_mmc_getcd(struct mmc *mmc)
int ret;
mxc_request_iomux(MX51_PIN_GPIO1_0, IOMUX_CONFIG_ALT1);
- gpio_direction_input(0);
+ gpio_direction_input(IMX_GPIO_NR(1,0));
mxc_request_iomux(MX51_PIN_GPIO1_6, IOMUX_CONFIG_ALT0);
- gpio_direction_input(6);
+ gpio_direction_input(IMX_GPIO_NR(1,6));
if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR)
- ret = !gpio_get_value(0);
+ ret = !gpio_get_value(IMX_GPIO_NR(1,0));
else
- ret = !gpio_get_value(6);
+ ret = !gpio_get_value(IMX_GPIO_NR(1,6));
return ret;
}
diff --git a/board/freescale/mx53ard/mx53ard.c
b/board/freescale/mx53ard/mx53ard.c
index 2d21584..ee5bd43 100644
--- a/board/freescale/mx53ard/mx53ard.c
+++ b/board/freescale/mx53ard/mx53ard.c
@@ -89,14 +89,14 @@ int board_mmc_getcd(struct mmc *mmc)
int ret;
mxc_request_iomux(MX53_PIN_GPIO_1, IOMUX_CONFIG_ALT1);
- gpio_direction_input(1);
+ gpio_direction_input(IMX_GPIO_NR(1,1));
mxc_request_iomux(MX53_PIN_GPIO_4, IOMUX_CONFIG_ALT1);
- gpio_direction_input(4);
+ gpio_direction_input(IMX_GPIO_NR(1,4));
if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR)
- ret = !gpio_get_value(1); /* GPIO1_1 */
+ ret = !gpio_get_value(IMX_GPIO_NR(1,1));
else
- ret = !gpio_get_value(4); /* GPIO1_4 */
+ ret = !gpio_get_value(IMX_GPIO_NR(1,4));
return ret;
}
diff --git a/board/freescale/mx53evk/mx53evk.c
b/board/freescale/mx53evk/mx53evk.c
index 8a6e31d..ed23e28 100644
--- a/board/freescale/mx53evk/mx53evk.c
+++ b/board/freescale/mx53evk/mx53evk.c
@@ -214,14 +214,14 @@ int board_mmc_getcd(struct mmc *mmc)
int ret;
mxc_request_iomux(MX53_PIN_EIM_DA11, IOMUX_CONFIG_ALT1);
- gpio_direction_input(75);
+ gpio_direction_input(IMX_GPIO_NR(3,11));
mxc_request_iomux(MX53_PIN_EIM_DA13, IOMUX_CONFIG_ALT1);
- gpio_direction_input(77);
+ gpio_direction_input(IMX_GPIO_NR(3,13));
if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR)
- ret = !gpio_get_value(77); /* GPIO3_13 */
+ ret = !gpio_get_value(IMX_GPIO_NR(3,13));
else
- ret = !gpio_get_value(75); /* GPIO3_11 */
+ ret = !gpio_get_value(IMX_GPIO_NR(3,11));
return ret;
}
diff --git a/board/freescale/mx53loco/mx53loco.c
b/board/freescale/mx53loco/mx53loco.c
index cbdcfad..8cb9bd9 100644
--- a/board/freescale/mx53loco/mx53loco.c
+++ b/board/freescale/mx53loco/mx53loco.c
@@ -175,14 +175,14 @@ int board_mmc_getcd(struct mmc *mmc)
int ret;
mxc_request_iomux(MX53_PIN_EIM_DA11, IOMUX_CONFIG_ALT1);
- gpio_direction_input(75);
+ gpio_direction_input(IMX_GPIO_NR(3,11));
mxc_request_iomux(MX53_PIN_EIM_DA13, IOMUX_CONFIG_ALT1);
- gpio_direction_input(77);
+ gpio_direction_input(IMX_GPIO_NR(3,13));
if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR)
- ret = !gpio_get_value(77); /* GPIO3_13 */
+ ret = !gpio_get_value(IMX_GPIO_NR(3,13));
else
- ret = !gpio_get_value(75); /* GPIO3_11 */
+ ret = !gpio_get_value(IMX_GPIO_NR(3,11));
return ret;
}
diff --git a/board/freescale/mx53smd/mx53smd.c
b/board/freescale/mx53smd/mx53smd.c
index c237980..cca9e99 100644
--- a/board/freescale/mx53smd/mx53smd.c
+++ b/board/freescale/mx53smd/mx53smd.c
@@ -135,8 +135,8 @@ struct fsl_esdhc_cfg esdhc_cfg[1] = {
int board_mmc_getcd(struct mmc *mmc)
{
mxc_request_iomux(MX53_PIN_EIM_DA13, IOMUX_CONFIG_ALT1);
- gpio_direction_input(77);
- return !gpio_get_value(77); /* GPIO3_13 */
+ gpio_direction_input(IMX_GPIO_NR(3,13));
+ return !gpio_get_value(IMX_GPIO_NR(3,13));
}
int board_mmc_init(bd_t *bis)
--
1.7.9.5
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [U-Boot] [PATCH] mx5:Use IMX_GPIO_NR macro
2012-08-23 16:43 [U-Boot] [PATCH] mx5:Use IMX_GPIO_NR macro Ashok
@ 2012-08-23 16:47 ` Fabio Estevam
2012-08-27 6:04 ` Stefano Babic
1 sibling, 0 replies; 3+ messages in thread
From: Fabio Estevam @ 2012-08-23 16:47 UTC (permalink / raw)
To: u-boot
On Thu, Aug 23, 2012 at 1:43 PM, Ashok <ashokkourla2000@gmail.com> wrote:
> From 9f76cd6a79c6595fc058e9103d9d4eebd138a2af Mon Sep 17 00:00:00 2001
> From: Ashok Kumar Reddy <ashokkourla2000@gmail.com>
> Date: Thu, 23 Aug 2012 21:24:53 +0530
> Subject: [PATCH] mx5:Use IMX_GPIO_NR macro
>
> Signed-off-by: Ashok Kumar Reddy <ashokkourla2000@gmail.com>
Acked-by: Fabio Estevam <fabio.estevam@freescale.com>
^ permalink raw reply [flat|nested] 3+ messages in thread
* [U-Boot] [PATCH] mx5:Use IMX_GPIO_NR macro
2012-08-23 16:43 [U-Boot] [PATCH] mx5:Use IMX_GPIO_NR macro Ashok
2012-08-23 16:47 ` Fabio Estevam
@ 2012-08-27 6:04 ` Stefano Babic
1 sibling, 0 replies; 3+ messages in thread
From: Stefano Babic @ 2012-08-27 6:04 UTC (permalink / raw)
To: u-boot
On 23/08/2012 18:43, Ashok wrote:
> From 9f76cd6a79c6595fc058e9103d9d4eebd138a2af Mon Sep 17 00:00:00 2001
> From: Ashok Kumar Reddy <ashokkourla2000@gmail.com>
> Date: Thu, 23 Aug 2012 21:24:53 +0530
> Subject: [PATCH] mx5:Use IMX_GPIO_NR macro
>
> Signed-off-by: Ashok Kumar Reddy <ashokkourla2000@gmail.com>
> ---
> board/freescale/mx51evk/mx51evk.c | 12 ++++++------
> board/freescale/mx53ard/mx53ard.c | 8 ++++----
> board/freescale/mx53evk/mx53evk.c | 8 ++++----
> board/freescale/mx53loco/mx53loco.c | 8 ++++----
> board/freescale/mx53smd/mx53smd.c | 4 ++--
> 5 files changed, 20 insertions(+), 20 deletions(-)
>
> diff --git a/board/freescale/mx51evk/mx51evk.c
> b/board/freescale/mx51evk/mx51evk.c
> index 514a7ac..55cdbed 100644
> --- a/board/freescale/mx51evk/mx51evk.c
> +++ b/board/freescale/mx51evk/mx51evk.c
> @@ -319,11 +319,11 @@ static void power_init(void)
> pmic_reg_write(p, REG_MODE_1, val);
>
> mxc_request_iomux(MX51_PIN_EIM_A20, IOMUX_CONFIG_ALT1);
> - gpio_direction_output(46, 0);
> + gpio_direction_output(IMX_GPIO_NR(2,14), 0);
^---space missing
checkpatch reports errors. Can you fix them globally and resubmit ? Thanks !
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2012-08-27 6:04 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-08-23 16:43 [U-Boot] [PATCH] mx5:Use IMX_GPIO_NR macro Ashok
2012-08-23 16:47 ` Fabio Estevam
2012-08-27 6:04 ` Stefano Babic
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox