[U-Boot] [PATCH] M28: Fix the use of gpmi-nand in mtdparts

[Stefano Babic <sbabic@denx.de>]

On 29/08/2012 03:12, Marek Vasut wrote:
> The mtd name of the NAND in Linux is "gpmi-nand", not "gpmi-nand.0" as
> it would be expected, since the controller doesn't support multiple NANDs
> attached to it as of now. Rectify this flub by adjusting default mtdparts.
> 
> Signed-off-by: Marek Vasut <marex@denx.de>
> Cc: Fabio Estevam <fabio.estevam@freescale.com>
> Cc: Stefano Babic <sbabic@denx.de>
> Cc: Otavio Salvador <otavio@ossystems.com.br>
> ---
>  include/configs/m28evk.h |    4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/include/configs/m28evk.h b/include/configs/m28evk.h
> index d5cd5a8..40df437 100644
> --- a/include/configs/m28evk.h
> +++ b/include/configs/m28evk.h
> @@ -172,9 +172,9 @@
>  #define	CONFIG_LZO
>  #define	CONFIG_MTD_DEVICE
>  #define	CONFIG_MTD_PARTITIONS
> -#define	MTDIDS_DEFAULT			"nand0=gpmi-nand.0"
> +#define	MTDIDS_DEFAULT			"nand0=gpmi-nand"
>  #define	MTDPARTS_DEFAULT			\
> -	"mtdparts=gpmi-nand.0:"			\
> +	"mtdparts=gpmi-nand:"			\
>  		"3m(bootloader)ro,"		\
>  		"512k(environment),"		\
>  		"512k(redundant-environment),"	\
> 

Acked-by: Stefano Babic <sbabic@denx.de>

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================