[U-Boot] [PATCH 2/2] ARM: at91sam9x5: enable MCI0 support for 9x5ek board.

[Bo Shen <voice.shen@atmel.com>]

Hi Josh,

On 9/7/2012 18:39, Josh Wu wrote:
>
> Signed-off-by: Josh Wu <josh.wu@atmel.com>
> ---
>   arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c |   13 +++++++++++++
>   board/atmel/at91sam9x5ek/at91sam9x5ek.c          |   16 ++++++++++++++++
>   include/configs/at91sam9x5ek.h                   |    8 ++++++++
>   3 files changed, 37 insertions(+)
>

I think add MCI1 support at the same time will be better. Otherwise,

Acked-by: voice.shen at atmel.com
Tested-by: voice.shen at atmel.com

> diff --git a/arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c b/arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c
> index 6d77219..3608e7c 100644
> --- a/arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c
> +++ b/arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c
> @@ -230,3 +230,16 @@ void at91_macb_hw_init(void)
>   #endif
>   }
>   #endif
> +
> +#if defined(CONFIG_GENERIC_ATMEL_MCI)
> +void at91_mci_hw_init(void)
> +{
> +	/* Initialize the MCI0 */
> +	at91_set_a_periph(AT91_PIO_PORTA, 17, 1);	/* MCCK */
> +	at91_set_a_periph(AT91_PIO_PORTA, 16, 1);	/* MCCDA */
> +	at91_set_a_periph(AT91_PIO_PORTA, 15, 1);	/* MCDA0 */
> +	at91_set_a_periph(AT91_PIO_PORTA, 18, 1);	/* MCDA1 */
> +	at91_set_a_periph(AT91_PIO_PORTA, 19, 1);	/* MCDA2 */
> +	at91_set_a_periph(AT91_PIO_PORTA, 20, 1);	/* MCDA3 */
> +}
> +#endif
> diff --git a/board/atmel/at91sam9x5ek/at91sam9x5ek.c b/board/atmel/at91sam9x5ek/at91sam9x5ek.c
> index 06028aa..d1f05ef 100644
> --- a/board/atmel/at91sam9x5ek/at91sam9x5ek.c
> +++ b/board/atmel/at91sam9x5ek/at91sam9x5ek.c
> @@ -42,6 +42,9 @@
>   #ifdef CONFIG_ATMEL_SPI
>   #include <spi.h>
>   #endif
> +#ifdef CONFIG_GENERIC_ATMEL_MCI
> +#include <mmc.h>
> +#endif
>
>   DECLARE_GLOBAL_DATA_PTR;
>
> @@ -258,6 +261,19 @@ void spi_cs_deactivate(struct spi_slave *slave)
>   }
>   #endif /* CONFIG_ATMEL_SPI */
>
> +#ifdef CONFIG_GENERIC_ATMEL_MCI
> +int board_mmc_init(bd_t *bd)
> +{
> +	/* Enable clock */
> +	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
> +	writel(1 << ATMEL_ID_HSMCI0, &pmc->pcer);
> +
> +	at91_mci_hw_init();
> +
> +	return atmel_mci_init((void *)ATMEL_BASE_HSMCI0);
> +}
> +#endif
> +
>   int board_early_init_f(void)
>   {
>   	at91_seriald_hw_init();
> diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h
> index 1ceb31a..974e08f 100644
> --- a/include/configs/at91sam9x5ek.h
> +++ b/include/configs/at91sam9x5ek.h
> @@ -136,6 +136,14 @@
>   #define CONFIG_CMD_UBIFS
>   #endif
>
> +/* MMC */
> +#define CONFIG_MMC
> +#define CONFIG_CMD_MMC
> +#define CONFIG_CMD_FAT
> +#define CONFIG_GENERIC_MMC
> +#define CONFIG_GENERIC_ATMEL_MCI
> +#define CONFIG_DOS_PARTITION
> +
>   /* Ethernet */
>   #define CONFIG_MACB
>   #define CONFIG_RMII
>