[U-Boot] [PATCH 1/2] mx6q: Factor out common DDR3 init code

[stefano babic <sbabic@denx.de>]

Am 12/09/2012 04:42, schrieb Liu Hui-R64343:
>> -----Original Message-----
>> From: Fabio Estevam [mailto:festevam at gmail.com]
>> Sent: Wednesday, September 12, 2012 10:33 AM
>> To: Liu Hui-R64343
>> Cc: Estevam Fabio-R49496; sbabic at denx.de; u-boot at lists.denx.de
>> Subject: Re: [U-Boot] [PATCH 1/2] mx6q: Factor out common DDR3 init code
>>
>> On Tue, Sep 11, 2012 at 11:26 PM, Liu Hui-R64343 <r64343@freescale.com>
>> wrote:
>>>> -----Original Message-----
>>>> From: u-boot-bounces at lists.denx.de
>>>> [mailto:u-boot-bounces at lists.denx.de]
>>>> On Behalf Of Fabio Estevam
>>>> Sent: Wednesday, September 12, 2012 2:33 AM
>>>> To: sbabic at denx.de
>>>> Cc: Estevam Fabio-R49496; u-boot at lists.denx.de
>>>> Subject: [U-Boot] [PATCH 1/2] mx6q: Factor out common DDR3 init code
>>>>
>>>> Factor out common DDR3 initialization code, allowing easier
>>>> maintainance of such scripts.
>>>
>>> Are you sure that we can use on DDR3 script to cover 3 kind of boards:
>>>
>>> ARM2/Sabrelite/SabreSD? Did you do the DDR stress test?
>>
>> Yes, mtest runs fine.
> 
> mtest is not enough, you need run FSL DDR stress test tool.

Then you are saying the *current* configuration in u-boot is already
buggy. Fabio has only moved the setup but the boards use now the same
configuration. Can you tell us which problem you have found with the
current code ?

Best regards,
Stefano Babic



-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================