[U-Boot] [PATCH v2 09/11] S3C24XX: Add NAND Flash driver

["José Miguel Gonçalves" <jose.goncalves@inov.pt>]

On 09/14/2012 08:01 PM, Tom Rini wrote:
> On Fri, Sep 14, 2012 at 07:45:40PM +0100, Jos? Miguel Gon?alves wrote:
>> On 14-09-2012 19:21, Marek Vasut wrote:
>>> Dear Jos? Miguel Gon?alves,
>>>
>>>> NAND Flash driver with HW ECC for the S3C24XX SoCs.
>>>> Currently it only supports SLC NAND chips.
>>>>
>>>> Signed-off-by: Jos? Miguel Gon?alves <jose.goncalves@inov.pt>
>>> [...]
>>>
>>>> +#include <common.h>
>>>> +#include <nand.h>
>>>> +#include <asm/io.h>
>>>> +#include <asm/arch/s3c24xx_cpu.h>
>>>> +#include <asm/errno.h>
>>>> +
>>>> +#define MAX_CHIPS	2
>>>> +static int nand_cs[MAX_CHIPS] = { 0, 1 };
>>>> +
>>>> +#ifdef CONFIG_SPL_BUILD
>>>> +#define printf(arg...) do {} while (0)
>>> This doesn't seem quite right ...
>>>
>>> 1) this should be in CPU directory
>>> 2) should be enabled only if CONFIG_SPL_SERIAL_SUPPORT is not set
>>> 3) should be inline function, not a macro
>> 1) and 3) OK.
>> Don't quite understand 2). I want to remove the printfs in the SPL
>> build, as it would blown up the internal SoC RAM space available.
>> So why add a condition with CONFIG_SPL_SERIAL_SUPPORT?
> You've got 8KB, based on the final patch in the series.  At least in my
> SPL series that's still enough to get you printf/puts (I believe 4kb was
> the cutoff where that had to be dropped).
>

Barely:

$ size u-boot-spl
    text       data        bss        dec        hex    filename
    3337          8        588       3933        f5d    u-boot-spl

$ size u-boot-spl-printf
    text       data        bss        dec        hex    filename
    7968          8        604       8580       2184 u-boot-spl-printf

The printf is not so important that justifies exhausting the IRAM space 
available and preventing any future SPL expansion...