From mboxrd@z Thu Jan 1 00:00:00 1970 From: =?ISO-8859-1?Q?Jos=E9_Miguel_Gon=E7alves?= Date: Mon, 17 Sep 2012 15:47:46 +0100 Subject: [U-Boot] [PATCH v2 11/11] S3C24XX: Add support to MINI2416 board In-Reply-To: <20120917143915.GB31809@bill-the-cat> References: <1347643742-19966-1-git-send-email-jose.goncalves@inov.pt> <1347643742-19966-12-git-send-email-jose.goncalves@inov.pt> <20120914185809.GK22028@bill-the-cat> <505597AB.8020900@inov.pt> <20120917143915.GB31809@bill-the-cat> Message-ID: <50573812.6030805@inov.pt> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 17-09-2012 15:39, Tom Rini wrote: > On Sun, Sep 16, 2012 at 10:11:07AM +0100, Jos? Miguel Gon?alves wrote: >> On 09/14/2012 07:58 PM, Tom Rini wrote: >>> On Fri, Sep 14, 2012 at 06:29:02PM +0100, Jos?? Miguel Gon??alves wrote: >>> >>>> The MINI2416 board is based on a Samsung's S3C2416 SoC and has 64MB DDR2 SDRAM, >>>> 256MB NAND Flash, a LAN9220 Ethernet Controller and a WM8731 Audio CODEC. >>>> This U-Boot port was implemented and tested on a unit bought to Boardcon >>>> (http://www.armdesigner.com/) but there are some other chinese providers >>>> that can supply it with a selectable NAND chip from 128MB to 1GB. >>> [snip] >>> >>> Can you please try this on top of my SPL framework series? Thanks! >> I thought I was using the latest SPL framework! >> Can you please detail on what I should do different? > Please see > http://www.mail-archive.com/u-boot at lists.denx.de/msg92156.html > As this is still not merged, I reckon you only want to check if this new SPL framework works fine with my board. I'm not expected to resubmit my patch to be according with the new framework, correct? Best regards, Jos? Gon?alves