[U-Boot] [PATCH] i.MX6: define struct iomuxc and IOMUX_GPR2 register bitfields

[Stefano Babic <sbabic@denx.de>]

On 19/09/2012 20:32, Eric Nelson wrote:
> Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
> ---
>  arch/arm/include/asm/arch-mx6/imx-regs.h |   73 ++++++++++++++++++++++++++++++
>  1 files changed, 73 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/arm/include/asm/arch-mx6/imx-regs.h b/arch/arm/include/asm/arch-mx6/imx-regs.h
> index 1781382..cb284e2 100644
> --- a/arch/arm/include/asm/arch-mx6/imx-regs.h
> +++ b/arch/arm/include/asm/arch-mx6/imx-regs.h
> @@ -200,6 +200,79 @@ struct src {
>  	u32     gpr10;
>  };
>  
> +struct iomuxc {
> +	u32 gpr[14];
> +	u32 omux[5];
> +	/* mux and pad registers */
> +};
> +
> +#define IOMUXC_GPR2_COUNTER_RESET_VAL_OFFSET		20
> +#define IOMUXC_GPR2_COUNTER_RESET_VAL_MASK		(3<<IOMUXC_GPR2_COUNTER_RESET_VAL_OFFSET)
> +#define IOMUXC_GPR2_LVDS_CLK_SHIFT_OFFSET		16
> +#define IOMUXC_GPR2_LVDS_CLK_SHIFT_MASK			(7<<IOMUXC_GPR2_LVDS_CLK_SHIFT_OFFSET)
> +
> +#define IOMUXC_GPR2_BGREF_RRMODE_OFFSET			15
> +#define IOMUXC_GPR2_BGREF_RRMODE_MASK			(1<<IOMUXC_GPR2_BGREF_RRMODE_OFFSET)
> +#define IOMUXC_GPR2_BGREF_RRMODE_INTERNAL_RES		(1<<IOMUXC_GPR2_BGREF_RRMODE_OFFSET)
> +#define IOMUXC_GPR2_BGREF_RRMODE_EXTERNAL_RES		(0<<IOMUXC_GPR2_BGREF_RRMODE_OFFSET)
> +#define IOMUXC_GPR2_VSYNC_ACTIVE_HIGH	0
> +#define IOMUXC_GPR2_VSYNC_ACTIVE_LOW	1
> +
> +#define IOMUXC_GPR2_DI1_VS_POLARITY_OFFSET		10
> +#define IOMUXC_GPR2_DI1_VS_POLARITY_MASK		(1<<IOMUXC_GPR2_DI1_VS_POLARITY_OFFSET)
> +#define IOMUXC_GPR2_DI1_VS_POLARITY_ACTIVE_HIGH		(IOMUXC_GPR2_VSYNC_ACTIVE_HIGH<<IOMUXC_GPR2_DI1_VS_POLARITY_OFFSET)
> +#define IOMUXC_GPR2_DI1_VS_POLARITY_ACTIVE_LOW		(IOMUXC_GPR2_VSYNC_ACTIVE_LOW<<IOMUXC_GPR2_DI1_VS_POLARITY_OFFSET)
> +
> +#define IOMUXC_GPR2_DI0_VS_POLARITY_OFFSET		9
> +#define IOMUXC_GPR2_DI0_VS_POLARITY_MASK		(1<<IOMUXC_GPR2_DI0_VS_POLARITY_OFFSET)
> +#define IOMUXC_GPR2_DI0_VS_POLARITY_ACTIVE_HIGH		(IOMUXC_GPR2_VSYNC_ACTIVE_HIGH<<IOMUXC_GPR2_DI0_VS_POLARITY_OFFSET)
> +#define IOMUXC_GPR2_DI0_VS_POLARITY_ACTIVE_LOW		(IOMUXC_GPR2_VSYNC_ACTIVE_LOW<<IOMUXC_GPR2_DI0_VS_POLARITY_OFFSET)
> +
> +#define IOMUXC_GPR2_BITMAP_SPWG	0
> +#define IOMUXC_GPR2_BITMAP_JEIDA	1
> +
> +#define IOMUXC_GPR2_BIT_MAPPING_CH1_OFFSET		8
> +#define IOMUXC_GPR2_BIT_MAPPING_CH1_MASK		(1<<IOMUXC_GPR2_BIT_MAPPING_CH1_OFFSET)
> +#define IOMUXC_GPR2_BIT_MAPPING_CH1_JEIDA		(IOMUXC_GPR2_BITMAP_JEIDA<<IOMUXC_GPR2_BIT_MAPPING_CH1_OFFSET)
> +#define IOMUXC_GPR2_BIT_MAPPING_CH1_SPWG		(IOMUXC_GPR2_BITMAP_SPWG<<IOMUXC_GPR2_BIT_MAPPING_CH1_OFFSET)
> +
> +#define IOMUXC_GPR2_DATA_WIDTH_18	0
> +#define IOMUXC_GPR2_DATA_WIDTH_24	1
> +
> +#define IOMUXC_GPR2_DATA_WIDTH_CH1_OFFSET		7
> +#define IOMUXC_GPR2_DATA_WIDTH_CH1_MASK			(1<<IOMUXC_GPR2_DATA_WIDTH_CH1_OFFSET)
> +#define IOMUXC_GPR2_DATA_WIDTH_CH1_18BIT		(IOMUXC_GPR2_DATA_WIDTH_18<<IOMUXC_GPR2_DATA_WIDTH_CH1_OFFSET)
> +#define IOMUXC_GPR2_DATA_WIDTH_CH1_24BIT		(IOMUXC_GPR2_DATA_WIDTH_24<<IOMUXC_GPR2_DATA_WIDTH_CH1_OFFSET)
> +
> +#define IOMUXC_GPR2_BIT_MAPPING_CH0_OFFSET		6
> +#define IOMUXC_GPR2_BIT_MAPPING_CH0_MASK		(1<<IOMUXC_GPR2_BIT_MAPPING_CH0_OFFSET)
> +#define IOMUXC_GPR2_BIT_MAPPING_CH0_JEIDA		(IOMUXC_GPR2_BITMAP_JEIDA<<IOMUXC_GPR2_BIT_MAPPING_CH0_OFFSET)
> +#define IOMUXC_GPR2_BIT_MAPPING_CH0_SPWG		(IOMUXC_GPR2_BITMAP_SPWG<<IOMUXC_GPR2_BIT_MAPPING_CH0_OFFSET)
> +
> +#define IOMUXC_GPR2_DATA_WIDTH_CH0_OFFSET		5
> +#define IOMUXC_GPR2_DATA_WIDTH_CH0_MASK			(1<<IOMUXC_GPR2_DATA_WIDTH_CH0_OFFSET)
> +#define IOMUXC_GPR2_DATA_WIDTH_CH0_18BIT		(IOMUXC_GPR2_DATA_WIDTH_18<<IOMUXC_GPR2_DATA_WIDTH_CH0_OFFSET)
> +#define IOMUXC_GPR2_DATA_WIDTH_CH0_24BIT		(IOMUXC_GPR2_DATA_WIDTH_24<<IOMUXC_GPR2_DATA_WIDTH_CH0_OFFSET)
> +
> +#define IOMUXC_GPR2_SPLIT_MODE_EN_OFFSET		4
> +#define IOMUXC_GPR2_SPLIT_MODE_EN_MASK			(1<<IOMUXC_GPR2_SPLIT_MODE_EN_OFFSET)
> +
> +#define IOMUXC_GPR2_MODE_DISABLED	0
> +#define IOMUXC_GPR2_MODE_ENABLED_DI0	1
> +#define IOMUXC_GPR2_MODE_ENABLED_DI1	2
> +
> +#define IOMUXC_GPR2_LVDS_CH1_MODE_OFFSET		2
> +#define IOMUXC_GPR2_LVDS_CH1_MODE_MASK			(3<<IOMUXC_GPR2_LVDS_CH1_MODE_OFFSET)
> +#define IOMUXC_GPR2_LVDS_CH1_MODE_DISABLED		(IOMUXC_GPR2_MODE_DISABLED<<IOMUXC_GPR2_LVDS_CH1_MODE_OFFSET)
> +#define IOMUXC_GPR2_LVDS_CH1_MODE_ENABLED_DI0		(IOMUXC_GPR2_MODE_ENABLED_DI0<<IOMUXC_GPR2_LVDS_CH1_MODE_OFFSET)
> +#define IOMUXC_GPR2_LVDS_CH1_MODE_ENABLED_DI1		(IOMUXC_GPR2_MODE_ENABLED_DI1<<IOMUXC_GPR2_LVDS_CH1_MODE_OFFSET)
> +
> +#define IOMUXC_GPR2_LVDS_CH0_MODE_OFFSET		0
> +#define IOMUXC_GPR2_LVDS_CH0_MODE_MASK			(3<<IOMUXC_GPR2_LVDS_CH0_MODE_OFFSET)
> +#define IOMUXC_GPR2_LVDS_CH0_MODE_DISABLED		(IOMUXC_GPR2_MODE_DISABLED<<IOMUXC_GPR2_LVDS_CH0_MODE_OFFSET)
> +#define IOMUXC_GPR2_LVDS_CH0_MODE_ENABLED_DI0		(IOMUXC_GPR2_MODE_ENABLED_DI0<<IOMUXC_GPR2_LVDS_CH0_MODE_OFFSET)
> +#define IOMUXC_GPR2_LVDS_CH0_MODE_ENABLED_DI1		(IOMUXC_GPR2_MODE_ENABLED_DI1<<IOMUXC_GPR2_LVDS_CH0_MODE_OFFSET)
> +
>  /* ECSPI registers */
>  struct cspi_regs {
>  	u32 rxdata;
> 

Acked-by: Stefano Babic <sbabic@denx.de>

Regards,
Stefano

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================