[U-Boot] [PATCH 2/3] mmc: sdhci: add the DMA select for SDMA

[Jaehoon Chung <jh80.chung@samsung.com>]

In host-control register, DMA select bit field is present.
BUt in sdhci.c, didn't select for DMA.
if set CONFIG_MMC_SDMA, we need to set SDMA-select bit.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
---
 drivers/mmc/sdhci.c |    7 +++++++
 1 files changed, 7 insertions(+), 0 deletions(-)

diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c
index 9329874..15b4686 100644
--- a/drivers/mmc/sdhci.c
+++ b/drivers/mmc/sdhci.c
@@ -82,6 +82,13 @@ static int sdhci_transfer_data(struct sdhci_host *host, struct mmc_data *data,
 				unsigned int start_addr)
 {
 	unsigned int stat, rdy, mask, timeout, block = 0;
+#ifdef CONFIG_MMC_SDMA
+	unsigned char ctrl;
+	ctrl = sdhci_readl(host, SDHCI_HOST_CONTROL);
+	ctrl &= ~SDHCI_CTRL_DMA_MASK;
+	ctrl |= SDHCI_CTRL_SDMA;
+	sdhci_writel(host, ctrl, SDHCI_HOST_CONTROL);
+#endif
 
 	timeout = 1000000;
 	rdy = SDHCI_INT_SPACE_AVAIL | SDHCI_INT_DATA_AVAIL;
-- 
1.7.4.1