From mboxrd@z Thu Jan  1 00:00:00 1970
From: Stefano Babic <sbabic@denx.de>
Date: Sun, 23 Sep 2012 19:50:54 +0200
Subject: [U-Boot] [PATCH] mx6qsabresd: Add Ethernet support
In-Reply-To: <1348025063-25480-1-git-send-email-festevam@gmail.com>
References: <1348025063-25480-1-git-send-email-festevam@gmail.com>
Message-ID: <505F4BFE.3090403@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On 19/09/2012 05:24, Fabio Estevam wrote:
> From: Fabio Estevam <fabio.estevam@freescale.com>
> 
> mx6qsabresd has a AR8031 Gigabit PHY.
> 
> Add support for it. 
> 
> Also increase CONFIG_SYS_MALLOC_LEN so that FEC buffer allocation does not fail.
> 
> Tested on 1Gbp and 100Mbps networks.
> 
> Suggested-by: Kim Phillips <kim.phillips@freescale.com>
> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
> ---

Applied to u-boot-imx, next branch.

Best regards,
Stefano Babic


-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================