From mboxrd@z Thu Jan  1 00:00:00 1970
From: =?ISO-8859-2?Q?=A3ukasz_Da=B3ek?= <luk0104@gmail.com>
Date: Sun, 23 Sep 2012 23:00:43 +0200
Subject: [U-Boot] [PATCH v2 1/6] h2200: Add support for iPAQ h2200
	palmtop
In-Reply-To: <201209232252.47867.marex@denx.de>
References: <1348410936-335-1-git-send-email-luk0104@gmail.com>
	<201209232205.34777.marex@denx.de> <505F6FFC.6040901@gmail.com>
	<201209232252.47867.marex@denx.de>
Message-ID: <505F787B.4040909@gmail.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On 23.09.2012 22:52, Marek Vasut wrote:
> Dear ?ukasz Da?ek,
>
>> On 23.09.2012 22:05, Marek Vasut wrote:
>>> Dear ?ukasz Da?ek,
>>>
>>>> On 23.09.2012 21:31, Marek Vasut wrote:
>>>>> Dear ?ukasz Da?ek,
>>>>>
>>>>>> On 23.09.2012 17:43, Marek Vasut wrote:
>>>>>>>> +	gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
>>>>>>>> +	return 0;
>>>>>>>> +}
>>>>>>>> diff --git a/board/h2200/h2200.h b/board/h2200/h2200.h
>>>>>>>> new file mode 100644
>>>>>>> Do you need this file at all? Can the udc_disconnect() not be put
>>>>>>> somewhere into usb.h ?
>>>>>> Can I just move this declaration into h2200.c?
>>>>> extern ... ? No, checkpatch will scream and extern is prohibited for a
>>>>> good reason.
>>>> So where should I put it?
>>> Isn't it a general call? some include/usb.h ?
>> For old layer maybe it is.
>>
>> I'm not sure but include/usb.h is for device implementing usb host but
>> pxa can only be device.
> PXA can be both, actually u-boot is mostly about host. Just put it there.
>
>> Including usb.h generate error.
>>
>> I'm going to add sd card support and other functions, maybe leaving it
>> would be better idea?
> Why do you think usb.h is not a good place ?
Because:
#if defined(CONFIG_USB_UHCI) || defined(CONFIG_USB_OHCI) || \
     defined(CONFIG_USB_EHCI) || defined(CONFIG_USB_OHCI_NEW) || \
     defined(CONFIG_USB_SL811HS) || defined(CONFIG_USB_ISP116X_HCD) || \
     defined(CONFIG_USB_R8A66597_HCD) || defined(CONFIG_USB_DAVINCI) || \
     defined(CONFIG_USB_OMAP3) || defined(CONFIG_USB_DA8XX) || \
     defined(CONFIG_USB_BLACKFIN) || defined(CONFIG_USB_AM35X)
...
#else
#error USB Lowlevel not defined
#endif

All of these definitions are usb host implementation (maybe OTG too) but pxa
cannot be host.

?ukasz Da?ek