From mboxrd@z Thu Jan  1 00:00:00 1970
From: =?ISO-8859-2?Q?=A3ukasz_Da=B3ek?= <luk0104@gmail.com>
Date: Mon, 24 Sep 2012 01:16:50 +0200
Subject: [U-Boot] [PATCH v2 1/6] h2200: Add support for iPAQ h2200
	palmtop
In-Reply-To: <201209240105.06516.marex@denx.de>
References: <1348410936-335-1-git-send-email-luk0104@gmail.com>
	<201209232331.58008.marex@denx.de> <505F8290.6010603@gmail.com>
	<201209240105.06516.marex@denx.de>
Message-ID: <505F9862.6020605@gmail.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On 24.09.2012 01:05, Marek Vasut wrote:
> Dear ?ukasz Da?ek,
>
>> On 23.09.2012 23:31, Marek Vasut wrote:
>>> Dear ?ukasz Da?ek,
>>>
>>>> On 23.09.2012 23:04, Marek Vasut wrote:
>>>>> PXA2xx is OHCI host with one OTG port.
>>>>>
>>>>      From pxa255 documentation:
>>>> "The UDC supports 16 endpoints and can operate half-duplex at a rate of
>>>> 12 Mbps (as a slave only,
>>>> not as a host or hub controller)."
>>>>
>>>>> what about include/usb/pxa27x_udc.h ... btw can't pxa27x and pxa25x UDC
>>>>> use the same driver?
>>>> pxa27x_udc driver is using older layer which doesn't work with usb
>>>> ethernet driver.
>>>>
>>>> Btw. pxa27x can be host, pxa25x can't.
>>> Can you update the new gadget driver to be compatible with pxa27x then ?
>> I don't have any board with pxa27x processor. And I'm quite sure that
>> differences between pxa25x and pxa27x usb are too big. Even in
>> Linux kernel are two separate drivers for 25x and 27x chips.
> Isn't the 25x only a subset of the 27x ?
>
Maybe it is.

You've asked me if I could update driver to compatible with pxa27x and my
answer is no. Maybe someone with pxa27x chip could.

I will left that h2200.h header. I'm sure that it will be helpful some day.

?ukasz Da?ek