From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefano Babic Date: Mon, 24 Sep 2012 17:02:56 +0200 Subject: [U-Boot] [PATCH V4] i.MX6: mx6qsabrelite: Add splash screen support In-Reply-To: <1348268030-28723-1-git-send-email-eric.nelson@boundarydevices.com> References: <1348268030-28723-1-git-send-email-eric.nelson@boundarydevices.com> Message-ID: <50607620.50701@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 22/09/2012 00:53, Eric Nelson wrote: > Adds support for two LVDS panels and one RGB panel to the SABRE-Lite > board: > Hannstar-XGA - 1024 x 768 LVDS (Freescale part number MCIMX-LVDS1) > wsvga-lvds - 1024 x 600 LVDS (Boundary p/n Nit6X_1024x600) > wvga-rgb - 800 x 480 RGB (Boundary p/n Nit6X_800x480) > > Auto-detects panel by probing the I2C touch controller of each. > > Setting 'panel' environment variable to one of the names above will override > auto-detection. > > Signed-off-by: Eric Nelson > --- > board/freescale/mx6qsabrelite/mx6qsabrelite.c | 245 ++++++++++++++++++++++++- > drivers/video/ipu_common.c | 2 +- > include/configs/mx6qsabrelite.h | 15 ++- > 3 files changed, 259 insertions(+), 3 deletions(-) Between V3 and V4 you changed also ipu_common.c, and that change does not apply. > /* address of boot parameters */ > diff --git a/drivers/video/ipu_common.c b/drivers/video/ipu_common.c > index cc8f881..5f0a1a8 100644 > --- a/drivers/video/ipu_common.c > +++ b/drivers/video/ipu_common.c > @@ -218,7 +218,7 @@ static struct clk ipu_clk = { > #else > .enable_reg = (u32 *)(CCM_BASE_ADDR + > offsetof(struct mxc_ccm_reg, CCGR3)), > - .enable_shift = MXC_CCM_CCGR3_IPU1_IPU_DI0_OFFSET, > + .enable_shift = MXC_CCM_CCGR3_IPU1_IPU_MASK, But in ipu_common.c: .enable_reg = (u32 *)(CCM_BASE_ADDR + offsetof(struct mxc_ccm_reg, CCGR5)), .enable_shift = MXC_CCM_CCGR5_CG5_OFFSET, I do not see another patch changing that. Am I missing something ? Best regards, Stefano -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================