[U-Boot] [PATCH] mx6q: Add basic support for mx6qsabreauto

[Stefano Babic <sbabic@denx.de>]

On 21/09/2012 15:58, Fabio Estevam wrote:
> mx6qsabreauto is a board based on mx6q SoC with the following features:
> - 2GB of DDR3
> - 2 USB ports
> - 1 HDMI output port
> - SPI NOR
> - 2 LVDS LCD ports
> - Gigabit Ethernet
> - Camera
> - eMMC and SD card slot
> - Multichannel Audio
> - CAN
> - SATA
> - NAND
> - PCIE
> - Video Input
> 
> Add very basic support for it.


Hi Fabio,

> 
> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
> ---
>  MAINTAINERS                                   |    1 +
>  board/freescale/mx6qsabreauto/Makefile        |   41 ++++++
>  board/freescale/mx6qsabreauto/imximage.cfg    |  159 +++++++++++++++++++++++
>  board/freescale/mx6qsabreauto/mx6qsabreauto.c |  117 +++++++++++++++++
>  boards.cfg                                    |    1 +
>  include/configs/mx6qsabreauto.h               |  166 +++++++++++++++++++++++++
>  6 files changed, 485 insertions(+)
>  create mode 100644 board/freescale/mx6qsabreauto/Makefile
>  create mode 100644 board/freescale/mx6qsabreauto/imximage.cfg
>  create mode 100644 board/freescale/mx6qsabreauto/mx6qsabreauto.c
>  create mode 100644 include/configs/mx6qsabreauto.h
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 130d0cc..f6f0b2a 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -655,6 +655,7 @@ Fabio Estevam <fabio.estevam@freescale.com>
>  	mx53ard		i.MX53
>  	mx53smd		i.MX53
>  	mx6qsabresd	i.MX6Q
> +	mx6qsabreauto	i.MX6Q
>  

I see that at least the config file is very similar to my6qsabresd. Is
it only now due to a draft support or are the two boards similar ? In
last case, what about to set a common include file, that both boards can
include ?

Best regards,
Stefano

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================