[U-Boot] =?true?q?=5BPULL=7D=20please=20pull=20u-boot-atmel/master=20into=20u-boot-arm/master?=

[U-Boot] =?true?q?=5BPULL=7D=20please=20pull=20u-boot-atmel/master=20into=20u-boot-arm/master?=

[Andreas Bießmann]

Dear Albert Aribaud,

as mentioned before there are some fixes left for this upcoming release, here
they are.

The following changes since commit 057df193b40d31799d41d43bc832a972f658bfe4:

  Merge remote-tracking branch 'u-boot-ti/master' into m (2012-09-05 20:20:04 +0200)

are available in the git repository at:


  git://git.denx.de/u-boot-atmel.git master

for you to fetch changes up to dc3e30bab7c5ef87bd24ebcbb7cdfc3fb2b44555:

  Atmel: sam9g10/9m10/9x5: Add support to boot DT kernel (2012-09-17 19:02:44 +0200)

----------------------------------------------------------------
Bo Shen (3):
      spi: add atmel at25df321 serial flash support
      spiflash: at25: using common spi flash operation
      Atmel: sam9g10/9m10/9x5: Add support to boot DT kernel

Wu, Josh (2):
      at91sam9x5: set default EBI I/O drive configuration.
      atmel_nand: fix the U-Boot output information about nand flash with PMECC enable.

 board/atmel/at91sam9x5ek/at91sam9x5ek.c |    4 ++++
 drivers/mtd/nand/atmel_nand.c           |    5 +++--
 drivers/mtd/spi/atmel.c                 |   17 ++++++++++++++++-
 include/configs/at91sam9261ek.h         |    2 ++
 include/configs/at91sam9m10g45ek.h      |    2 ++
 include/configs/at91sam9x5ek.h          |    2 ++
 6 files changed, 29 insertions(+), 3 deletions(-)

Best regards

Andreas Bie??mann

[U-Boot] [PULL} please pull u-boot-atmel/master into u-boot-arm/master

[Andreas Bießmann]

Dear Albert Aribaud,


This One Sees to be missed or rc1

Best regards

Andreas Bie?mann

Am Montag, 17. September 2012 schrieb Andreas Bie?mann :

> Dear Albert Aribaud,
>
> as mentioned before there are some fixes left for this upcoming release,
> here
> they are.
>
> The following changes since commit
> 057df193b40d31799d41d43bc832a972f658bfe4:
>
>   Merge remote-tracking branch 'u-boot-ti/master' into m (2012-09-05
> 20:20:04 +0200)
>
> are available in the git repository at:
>
>
>   git://git.denx.de/u-boot-atmel.git master
>
> for you to fetch changes up to dc3e30bab7c5ef87bd24ebcbb7cdfc3fb2b44555:
>
>   Atmel: sam9g10/9m10/9x5: Add support to boot DT kernel (2012-09-17
> 19:02:44 +0200)
>
> ----------------------------------------------------------------
> Bo Shen (3):
>       spi: add atmel at25df321 serial flash support
>       spiflash: at25: using common spi flash operation
>       Atmel: sam9g10/9m10/9x5: Add support to boot DT kernel
>
> Wu, Josh (2):
>       at91sam9x5: set default EBI I/O drive configuration.
>       atmel_nand: fix the U-Boot output information about nand flash with
> PMECC enable.
>
>  board/atmel/at91sam9x5ek/at91sam9x5ek.c |    4 ++++
>  drivers/mtd/nand/atmel_nand.c           |    5 +++--
>  drivers/mtd/spi/atmel.c                 |   17 ++++++++++++++++-
>  include/configs/at91sam9261ek.h         |    2 ++
>  include/configs/at91sam9m10g45ek.h      |    2 ++
>  include/configs/at91sam9x5ek.h          |    2 ++
>  6 files changed, 29 insertions(+), 3 deletions(-)
>
> Best regards
>
> Andreas Bie?mann
>

[U-Boot] =?true?q?=5BPULL=5D=20please=20pull=20u-boot-atmel/master=20into=20u-boot-arm/master?=

[Andreas Bießmann]

resent cause the old one didn't make its way into patchwork.

Dear Albert Aribaud,

as mentioned before there are some fixes left for this upcoming release, here
they are.

The following changes since commit 057df193b40d31799d41d43bc832a972f658bfe4:

  Merge remote-tracking branch 'u-boot-ti/master' into m (2012-09-05 20:20:04 +0200)

are available in the git repository at:


  git://git.denx.de/u-boot-atmel.git master

for you to fetch changes up to dc3e30bab7c5ef87bd24ebcbb7cdfc3fb2b44555:

  Atmel: sam9g10/9m10/9x5: Add support to boot DT kernel (2012-09-17 19:02:44 +0200)

----------------------------------------------------------------
Bo Shen (3):
      spi: add atmel at25df321 serial flash support
      spiflash: at25: using common spi flash operation
      Atmel: sam9g10/9m10/9x5: Add support to boot DT kernel

Wu, Josh (2):
      at91sam9x5: set default EBI I/O drive configuration.
      atmel_nand: fix the U-Boot output information about nand flash with PMECC enable.

 board/atmel/at91sam9x5ek/at91sam9x5ek.c |    4 ++++
 drivers/mtd/nand/atmel_nand.c           |    5 +++--
 drivers/mtd/spi/atmel.c                 |   17 ++++++++++++++++-
 include/configs/at91sam9261ek.h         |    2 ++
 include/configs/at91sam9m10g45ek.h      |    2 ++
 include/configs/at91sam9x5ek.h          |    2 ++
 6 files changed, 29 insertions(+), 3 deletions(-)

Best regards

Andreas Bie??mann

[U-Boot] [PULL] please pull u-boot-atmel/master into u-boot-arm/master

[Andreas Bießmann]

Another resent ... sorry for the noise!
I found the root cause why it did not appear on patchwork, my
sendemail.assume8bitencoding was set to 'true' but it should be set to
'UTF-8'. Therefore the header where corupted (Content-Type: text/plain;
charset=true). This mail should finally reach patchwork now.

resent cause the old one didn't make its way into patchwork.

Dear Albert Aribaud,

as mentioned before there are some fixes left for this upcoming release, here
they are.

The following changes since commit 057df193b40d31799d41d43bc832a972f658bfe4:

  Merge remote-tracking branch 'u-boot-ti/master' into m (2012-09-05 20:20:04 +0200)

are available in the git repository at:


  git://git.denx.de/u-boot-atmel.git master

for you to fetch changes up to dc3e30bab7c5ef87bd24ebcbb7cdfc3fb2b44555:

  Atmel: sam9g10/9m10/9x5: Add support to boot DT kernel (2012-09-17 19:02:44 +0200)

----------------------------------------------------------------
Bo Shen (3):
      spi: add atmel at25df321 serial flash support
      spiflash: at25: using common spi flash operation
      Atmel: sam9g10/9m10/9x5: Add support to boot DT kernel

Wu, Josh (2):
      at91sam9x5: set default EBI I/O drive configuration.
      atmel_nand: fix the U-Boot output information about nand flash with PMECC enable.

 board/atmel/at91sam9x5ek/at91sam9x5ek.c |    4 ++++
 drivers/mtd/nand/atmel_nand.c           |    5 +++--
 drivers/mtd/spi/atmel.c                 |   17 ++++++++++++++++-
 include/configs/at91sam9261ek.h         |    2 ++
 include/configs/at91sam9m10g45ek.h      |    2 ++
 include/configs/at91sam9x5ek.h          |    2 ++
 6 files changed, 29 insertions(+), 3 deletions(-)

Best regards

Andreas Bie?mann

[U-Boot] [PULL] please pull u-boot-atmel/master into u-boot-arm/master

[Andreas Bießmann]

Dear Albert Aribaud,

any chance to get this pulled before -rc2?

Best regards

Andreas Bie?mann

On 22.09.2012 05:36, Andreas Bie?mann wrote:
> Another resent ... sorry for the noise!
> I found the root cause why it did not appear on patchwork, my
> sendemail.assume8bitencoding was set to 'true' but it should be set to
> 'UTF-8'. Therefore the header where corupted (Content-Type: text/plain;
> charset=true). This mail should finally reach patchwork now.
> 
> resent cause the old one didn't make its way into patchwork.
> 
> Dear Albert Aribaud,
> 
> as mentioned before there are some fixes left for this upcoming release, here
> they are.
> 
> The following changes since commit 057df193b40d31799d41d43bc832a972f658bfe4:
> 
>   Merge remote-tracking branch 'u-boot-ti/master' into m (2012-09-05 20:20:04 +0200)
> 
> are available in the git repository at:
> 
> 
>   git://git.denx.de/u-boot-atmel.git master
> 
> for you to fetch changes up to dc3e30bab7c5ef87bd24ebcbb7cdfc3fb2b44555:
> 
>   Atmel: sam9g10/9m10/9x5: Add support to boot DT kernel (2012-09-17 19:02:44 +0200)
> 
> ----------------------------------------------------------------
> Bo Shen (3):
>       spi: add atmel at25df321 serial flash support
>       spiflash: at25: using common spi flash operation
>       Atmel: sam9g10/9m10/9x5: Add support to boot DT kernel
> 
> Wu, Josh (2):
>       at91sam9x5: set default EBI I/O drive configuration.
>       atmel_nand: fix the U-Boot output information about nand flash with PMECC enable.
> 
>  board/atmel/at91sam9x5ek/at91sam9x5ek.c |    4 ++++
>  drivers/mtd/nand/atmel_nand.c           |    5 +++--
>  drivers/mtd/spi/atmel.c                 |   17 ++++++++++++++++-
>  include/configs/at91sam9261ek.h         |    2 ++
>  include/configs/at91sam9m10g45ek.h      |    2 ++
>  include/configs/at91sam9x5ek.h          |    2 ++
>  6 files changed, 29 insertions(+), 3 deletions(-)
> 
> Best regards
> 
> Andreas Bie?mann
> 

[U-Boot] [PULL] please pull u-boot-atmel/master into u-boot-arm/master

[Albert ARIBAUD]

Hi Andreas,

On Tue, 25 Sep 2012 09:46:06 +0200, "Andreas Bie?mann"
<andreas.devel@googlemail.com> wrote:

> Dear Albert Aribaud,
> 
> any chance to get this pulled before -rc2?
> 
> Best regards
> 
> Andreas Bie?mann
> 
> On 22.09.2012 05:36, Andreas Bie?mann wrote:
> > Another resent ... sorry for the noise!
> > I found the root cause why it did not appear on patchwork, my
> > sendemail.assume8bitencoding was set to 'true' but it should be set to
> > 'UTF-8'. Therefore the header where corupted (Content-Type: text/plain;
> > charset=true). This mail should finally reach patchwork now.
> > 
> > resent cause the old one didn't make its way into patchwork.
> > 
> > Dear Albert Aribaud,
> > 
> > as mentioned before there are some fixes left for this upcoming release, here
> > they are.
> > 
> > The following changes since commit 057df193b40d31799d41d43bc832a972f658bfe4:
> > 
> >   Merge remote-tracking branch 'u-boot-ti/master' into m (2012-09-05 20:20:04 +0200)
> > 
> > are available in the git repository at:
> > 
> > 
> >   git://git.denx.de/u-boot-atmel.git master
> > 
> > for you to fetch changes up to dc3e30bab7c5ef87bd24ebcbb7cdfc3fb2b44555:
> > 
> >   Atmel: sam9g10/9m10/9x5: Add support to boot DT kernel (2012-09-17 19:02:44 +0200)
> > 
> > ----------------------------------------------------------------
> > Bo Shen (3):
> >       spi: add atmel at25df321 serial flash support
> >       spiflash: at25: using common spi flash operation
> >       Atmel: sam9g10/9m10/9x5: Add support to boot DT kernel
> > 
> > Wu, Josh (2):
> >       at91sam9x5: set default EBI I/O drive configuration.
> >       atmel_nand: fix the U-Boot output information about nand flash with PMECC enable.
> > 
> >  board/atmel/at91sam9x5ek/at91sam9x5ek.c |    4 ++++
> >  drivers/mtd/nand/atmel_nand.c           |    5 +++--
> >  drivers/mtd/spi/atmel.c                 |   17 ++++++++++++++++-
> >  include/configs/at91sam9261ek.h         |    2 ++
> >  include/configs/at91sam9m10g45ek.h      |    2 ++
> >  include/configs/at91sam9x5ek.h          |    2 ++
> >  6 files changed, 29 insertions(+), 3 deletions(-)
> > 
> > Best regards
> > 
> > Andreas Bie?mann
> > 
> 
> 

Applied to u-boot-arm/master, thanks!

Amicalement,
-- 
Albert.