From mboxrd@z Thu Jan  1 00:00:00 1970
From: Stefano Babic <sbabic@denx.de>
Date: Wed, 26 Sep 2012 16:40:44 +0200
Subject: [U-Boot] Configure a Numonyx Axcell M29EW on a MPC8323 board
In-Reply-To: <F1F6EC0C8B75034F9E3A79FC85122E8E02894196@aquib01a>
References: <F1F6EC0C8B75034F9E3A79FC85122E8E02894196@aquib01a>
Message-ID: <506313EC.2020901@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On 25/09/2012 08:59, SETTE AGOSTINO - technolabs wrote:
> Hi all,
> 
> 
> (2 << BR_PS_SHIFT) | /* 16 bit port size */ \
> 
> BR_V) /* valid */
> 
> @
> 
> #define CONFIG_SYS_OR0_PRELIM 0x00007ff7 /* 512MB Flash size */

Without checking the manual, this seems wrong. It seems to me that the
timing is set, but not the size. Does the macro MEG_TO_AM() work on your
SOC ?

Best regards,
Stefano

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================