From: Stefano Babic <sbabic@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 09/14] mx5 clocks: Fix get_ipg_per_clk()
Date: Fri, 28 Sep 2012 11:31:11 +0200 [thread overview]
Message-ID: <50656E5F.10807@denx.de> (raw)
In-Reply-To: <433970799.5372457.1348777388137.JavaMail.root@advansee.com>
On 27/09/2012 22:23, Beno?t Th?baudeau wrote:
> This fixes the "IPG PERCLK" frequency printed by the clocks command. The issue
> was that get_ipg_per_clk() used periph_clk instead of lp_apm in the case
> CCM.CBCMR.perclk_lp_apm_sel is set.
>
> It also fixes I?C support.
>
Hi Beno?t,
I understand "clocks" reports a wrong value only if
CCM.CBCMR.perclk_lp_apm_sel is set, not always.
Can you better explain me which is wrong and which is the fix for I2C ?
It seems unrelated, and I do not get the reason checking the patch
Thanks,
Stefano
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
next prev parent reply other threads:[~2012-09-28 9:31 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-14 18:05 [U-Boot] [PATCH 00/10] mx5: Fix clocks Benoît Thébaudeau
2012-08-14 18:06 ` [U-Boot] [PATCH 01/10] mx5: Undeclare imx_decode_pll() Benoît Thébaudeau
2012-08-23 9:10 ` Stefano Babic
2012-08-14 18:06 ` [U-Boot] [PATCH 02/10] mx5: Use explicit clock gate names Benoît Thébaudeau
2012-08-14 18:54 ` Marek Vasut
2012-08-14 19:13 ` Benoît Thébaudeau
2012-09-27 20:19 ` [U-Boot] [PATCH v2 01/14] mx5/6: Define default SoC input clock frequencies Benoît Thébaudeau
2012-09-27 20:20 ` [U-Boot] [PATCH v2 02/14] mx5 clocks: Cleanup Benoît Thébaudeau
2012-09-28 8:44 ` Stefano Babic
2012-09-27 20:21 ` [U-Boot] [PATCH v2 03/14] mx5: Use explicit clock gate names Benoît Thébaudeau
2012-09-28 8:53 ` Stefano Babic
2012-09-27 20:21 ` [U-Boot] [PATCH v2 04/14] mx5: Fix clock gate values Benoît Thébaudeau
2012-09-27 20:21 ` [U-Boot] [PATCH v2 05/14] mx51: Fix USB PHY clocks Benoît Thébaudeau
2012-09-27 20:47 ` Marek Vasut
2012-09-28 7:26 ` Igor Grinberg
2012-09-28 10:27 ` Benoît Thébaudeau
2012-09-28 10:43 ` Stefano Babic
2012-09-28 13:00 ` Benoît Thébaudeau
2012-09-28 15:02 ` Stefano Babic
2012-09-28 17:09 ` [U-Boot] [PATCH v3 " Benoît Thébaudeau
2012-10-02 8:35 ` Igor Grinberg
2012-09-27 20:22 ` [U-Boot] [PATCH v2 06/14] mx5 clocks: Add and use CCSR definitions Benoît Thébaudeau
2012-09-27 20:22 ` [U-Boot] [PATCH v2 07/14] mx5 clocks: Fix get_lp_apm() Benoît Thébaudeau
2012-09-27 20:22 ` [U-Boot] [PATCH v2 08/14] mx5 clocks: Fix get_periph_clk() Benoît Thébaudeau
2012-09-27 20:23 ` [U-Boot] [PATCH v2 09/14] mx5 clocks: Fix get_ipg_per_clk() Benoît Thébaudeau
2012-09-28 9:31 ` Stefano Babic [this message]
2012-09-28 10:42 ` Benoît Thébaudeau
2012-09-28 10:45 ` Stefano Babic
2012-09-28 12:55 ` Benoît Thébaudeau
2012-09-28 15:01 ` Stefano Babic
2012-09-27 20:23 ` [U-Boot] [PATCH v2 10/14] mx5 clocks: Fix get_uart_clk() Benoît Thébaudeau
2012-09-27 20:23 ` [U-Boot] [PATCH v2 11/14] mx5 clocks: Simplify imx_get_cspiclk() Benoît Thébaudeau
2012-09-27 20:23 ` [U-Boot] [PATCH v2 12/14] mx5 clocks: Fix MXC_FEC_CLK Benoît Thébaudeau
2012-09-27 20:24 ` [U-Boot] [PATCH v2 13/14] mx51: Fix I2C clock ID check Benoît Thébaudeau
2012-09-27 20:24 ` [U-Boot] [PATCH v2 14/14] mx5/6 clocks: Fix SDHC clocks Benoît Thébaudeau
2012-09-28 8:42 ` [U-Boot] [PATCH v2 01/14] mx5/6: Define default SoC input clock frequencies Stefano Babic
2012-09-30 10:28 ` Stefano Babic
2012-09-30 13:55 ` Benoît Thébaudeau
2012-09-30 14:05 ` Stefano Babic
2012-08-14 18:06 ` [U-Boot] [PATCH 03/10] mx5 clocks: Add and use CCSR definitions Benoît Thébaudeau
2012-08-14 18:55 ` Marek Vasut
2012-08-14 19:14 ` Benoît Thébaudeau
2012-08-14 19:11 ` Marek Vasut
2012-08-14 18:07 ` [U-Boot] [PATCH 04/10] mx5 clocks: Fix get_lp_apm() Benoît Thébaudeau
2012-08-14 18:07 ` [U-Boot] [PATCH 05/10] mx5 clocks: Fix get_periph_clk() Benoît Thébaudeau
2012-08-14 18:07 ` [U-Boot] [PATCH 06/10] mx5 clocks: Fix get_ipg_per_clk() Benoît Thébaudeau
2012-08-14 18:07 ` [U-Boot] [PATCH 07/10] mx5 clocks: Fix get_uart_clk() Benoît Thébaudeau
2012-08-20 9:52 ` Stefano Babic
2012-08-20 10:05 ` Stefano Babic
2012-08-14 18:07 ` [U-Boot] [PATCH 08/10] mx5 clocks: Simplify imx_get_cspiclk() Benoît Thébaudeau
2012-08-14 18:08 ` [U-Boot] [PATCH 09/10] mx5 clocks: Fix eSDHC clock Benoît Thébaudeau
2012-08-14 18:08 ` [U-Boot] [PATCH 10/10] mx5 clocks: Fix MXC_FEC_CLK Benoît Thébaudeau
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=50656E5F.10807@denx.de \
--to=sbabic@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).