From mboxrd@z Thu Jan  1 00:00:00 1970
From: =?ISO-8859-2?Q?=A3ukasz_Da=B3ek?= <luk0104@gmail.com>
Date: Wed, 03 Oct 2012 02:30:43 +0200
Subject: [U-Boot] [PATCH v5 3/3] h2200: Add USB CDC ethernet support
In-Reply-To: <201210030225.02968.marex@denx.de>
References: <1349218267-23809-1-git-send-email-luk0104@gmail.com>
	<201210030218.03778.marex@denx.de> <506B85A8.808@gmail.com>
	<201210030225.02968.marex@denx.de>
Message-ID: <506B8733.3000609@gmail.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On 03.10.2012 02:25, Marek Vasut wrote:
> Dear ?ukasz Da?ek,
>
>> On 03.10.2012 02:18, Marek Vasut wrote:
>>> Dear ?ukasz Da?ek,
>>>
>>>> On 03.10.2012 02:06, Marek Vasut wrote:
>>>>> Dear Lukasz Dalek,
>>>>>
>>>>>> Add support for ethernet over USB which can be used for e.g. booting
>>>>>> process. It works with tftp and dhcp clients code.
>>>>>>
>>>>>> Signed-off-by: Lukasz Dalek<luk0104@gmail.com>
>>>>>> ---
>>>>>>
>>>>>> Changes for v5:
>>>>>> 	- Surrendered #include<usb.h>    with CONFIGs
>>>>>> 	
>>>>>>     board/h2200/h2200.c     |   17 +++++++++++++++++
>>>>>>     boards.cfg              |    1 +
>>>>>>     include/configs/h2200.h |   27 +++++++++++++++++++++++++++
>>>>>>     3 files changed, 45 insertions(+), 0 deletions(-)
>>>>> [...]
>>>>>
>>>>>> diff --git a/boards.cfg b/boards.cfg
>>>>>> index ab10938..a03a469 100644
>>>>>> --- a/boards.cfg
>>>>>> +++ b/boards.cfg
>>>>>> @@ -283,6 +283,7 @@ pdnb3                        arm         ixp
>>>>>> pdnb3               prodriv scpu                         arm
>>>>>> ixp
>>>>>>
>>>>>>          pdnb3               prodrive       -           pdnb3:SCPU
>>>>>>          balloon3
>>>>>>
>>>>>>                      arm         pxa
>>>>>>
>>>>>>     h2200                        arm         pxa
>>>>>>
>>>>>> +h2200_usbeth                 arm         pxa         h2200
>>>>>>
>>>>>>    -
>>>>> I told you to enable the USB ethernet by default, so why do you add
>>>>> this board?
>>>> I don't understand.
>>>> We agreed to split h2200 support into two parts. First one adding basic
>>>> support for device, second one adding support for usb ethernet for
>>>> h2200.
>>> Yes, but I fail to understand why you need TWO board entries for that.
>>> Adding the USB ethernet support is just a feature, you don't need
>>> additional board entry for that ... so what is the idea behind adding
>>> it?
>> Because easier is to type make h2200_usbeth_config than modifiy config.
> Why don't you enable the USB ethernet by default for "h2200" target then?
>
> Best regards,
> Marek Vasut
I will enable. This two entries really look weird.

?ukasz Da?ek