From mboxrd@z Thu Jan  1 00:00:00 1970
From: =?ISO-8859-2?Q?=A3ukasz_Da=B3ek?= <luk0104@gmail.com>
Date: Wed, 03 Oct 2012 11:50:58 +0200
Subject: [U-Boot] [PATCH v5 3/3] h2200: Add USB CDC ethernet support
In-Reply-To: <201210030304.22575.marex@denx.de>
References: <1349218267-23809-1-git-send-email-luk0104@gmail.com>
	<201210030225.02968.marex@denx.de> <506B8733.3000609@gmail.com>
	<201210030304.22575.marex@denx.de>
Message-ID: <506C0A82.5050301@gmail.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On 03.10.2012 03:04, Marek Vasut wrote:
> Dear ?ukasz Da?ek,
>
>> On 03.10.2012 02:25, Marek Vasut wrote:
>>> Dear ?ukasz Da?ek,
>>>
>>>> On 03.10.2012 02:18, Marek Vasut wrote:
>>>>> Dear ?ukasz Da?ek,
>>>>>
>>>>>> On 03.10.2012 02:06, Marek Vasut wrote:
>>>>>>> Dear Lukasz Dalek,
>>>>>>>
>>>>>>>> Add support for ethernet over USB which can be used for e.g. booting
>>>>>>>> process. It works with tftp and dhcp clients code.
>>>>>>>>
>>>>>>>> Signed-off-by: Lukasz Dalek<luk0104@gmail.com>
>>>>>>>> ---
>>>>>>>>
>>>>>>>> Changes for v5:
>>>>>>>> 	- Surrendered #include<usb.h>     with CONFIGs
>>>>>>>> 	
>>>>>>>>      board/h2200/h2200.c     |   17 +++++++++++++++++
>>>>>>>>      boards.cfg              |    1 +
>>>>>>>>      include/configs/h2200.h |   27 +++++++++++++++++++++++++++
>>>>>>>>      3 files changed, 45 insertions(+), 0 deletions(-)
>>>>>>> [...]
>>>>>>>
>>>>>>>> diff --git a/boards.cfg b/boards.cfg
>>>>>>>> index ab10938..a03a469 100644
>>>>>>>> --- a/boards.cfg
>>>>>>>> +++ b/boards.cfg
>>>>>>>> @@ -283,6 +283,7 @@ pdnb3                        arm         ixp
>>>>>>>> pdnb3               prodriv scpu                         arm
>>>>>>>> ixp
>>>>>>>>
>>>>>>>>           pdnb3               prodrive       -           pdnb3:SCPU
>>>>>>>>           balloon3
>>>>>>>>
>>>>>>>>                       arm         pxa
>>>>>>>>
>>>>>>>>      h2200                        arm         pxa
>>>>>>>>
>>>>>>>> +h2200_usbeth                 arm         pxa         h2200
>>>>>>>>
>>>>>>>>     -
>>>>>>> I told you to enable the USB ethernet by default, so why do you add
>>>>>>> this board?
>>>>>> I don't understand.
>>>>>> We agreed to split h2200 support into two parts. First one adding
>>>>>> basic support for device, second one adding support for usb ethernet
>>>>>> for h2200.
>>>>> Yes, but I fail to understand why you need TWO board entries for that.
>>>>> Adding the USB ethernet support is just a feature, you don't need
>>>>> additional board entry for that ... so what is the idea behind adding
>>>>> it?
>>>> Because easier is to type make h2200_usbeth_config than modifiy config.
>>> Why don't you enable the USB ethernet by default for "h2200" target then?
>>>
>>> Best regards,
>>> Marek Vasut
>> I will enable. This two entries really look weird.
> Ok, so we're clear there'll be one entry with ethernet enabled called "h2200",
> yes?
>
> Best regards,
> Marek Vasut
Yes

?ukasz Da?ek