From mboxrd@z Thu Jan  1 00:00:00 1970
From: Sinan Akman <sinan@writeme.com>
Date: Thu, 04 Oct 2012 17:51:24 -0400
Subject: [U-Boot] [PATCH 1/3] Add nitrogen6x board
In-Reply-To: <506E02E2.4030506@writeme.com>
References: <1349380149-8693-1-git-send-email-eric.nelson@boundarydevices.com>
	<1349380149-8693-2-git-send-email-eric.nelson@boundarydevices.com>
	<506E02E2.4030506@writeme.com>
Message-ID: <506E04DC.4020702@writeme.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On 10/04/2012 05:42 PM, Sinan Akman wrote:
> On 10/04/2012 03:49 PM, Eric Nelson wrote:
> [..]
>> +    gpio_direction_output(IMX_GPIO_NR(6, 24), 1);
>> +
>> +    /* Need delay 10ms according to KSZ9021 spec */
>> +    udelay(1000 * 10);
>> +    gpio_set_value(IMX_GPIO_NR(3, 23), 1);
>
>      Don't you need a
>
>      gpio_set_value(IMX_GPIO_NR(1, 27), 1);
>
>      here for Nitrogen6x ?
>

Never mind, I just saw that this is in a separate patch. Sorry
for the noise.