From: Eric Nelson <eric.nelson@boundarydevices.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH V3 17/32] imximage.cfg: run files through C preprocessor
Date: Sun, 07 Oct 2012 11:19:01 -0700 [thread overview]
Message-ID: <5071C795.5000208@boundarydevices.com> (raw)
In-Reply-To: <1349315254-21151-18-git-send-email-troy.kisky@boundarydevices.com>
Hi Troy,
On 10/03/2012 06:47 PM, Troy Kisky wrote:
> The '#' used as comments in the files cause the preprocessor
> trouble, so change to /* */.
>
> Signed-off-by: Troy Kisky<troy.kisky@boundarydevices.com>
> ---
> Makefile | 3 +-
> board/esg/ima3-mx53/imximage.cfg | 120 ++++++-----
> board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg | 90 ++++----
> board/freescale/mx25pdk/imximage.cfg | 77 +++----
> board/freescale/mx51evk/imximage.cfg | 114 +++++-----
> board/freescale/mx53ard/imximage_dd3.cfg | 83 ++++----
> board/freescale/mx53evk/imximage.cfg | 86 ++++----
> board/freescale/mx53loco/imximage.cfg | 83 ++++----
> board/freescale/mx53smd/imximage.cfg | 83 ++++----
> board/freescale/mx6qarm2/imximage.cfg | 88 ++++----
> board/genesi/mx51_efikamx/imximage_mx.cfg | 132 ++++++------
> board/genesi/mx51_efikamx/imximage_sb.cfg | 126 +++++------
> board/ttcontrol/vision2/imximage_hynix.cfg | 295 ++++++++++++++------------
> 13 files changed, 727 insertions(+), 653 deletions(-)
>
> diff --git a/Makefile b/Makefile
> index a40d4cc..64ff1b8 100644
> --- a/Makefile
> +++ b/Makefile
> @@ -431,7 +431,8 @@ $(obj)u-boot.img: $(obj)u-boot.bin
> -d $< $@
>
> $(obj)u-boot.imx: $(obj)u-boot.bin
> - $(obj)tools/mkimage -n $(CONFIG_IMX_CONFIG) -T imximage \
> + $(CC) -E -x c $(CONFIG_IMX_CONFIG) -I./include -o $(obj)imxcfg.imx
> + $(obj)tools/mkimage -n $(obj)imxcfg.imx -T imximage \
> -e $(CONFIG_SYS_TEXT_BASE) -d $< $@
This bit creates imxcfg.imx.
If built in-tree, the file will be reported as a new file in 'git status'.
Is there a reason it can't be deleted after the build?
next prev parent reply other threads:[~2012-10-07 18:19 UTC|newest]
Thread overview: 202+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-09-19 0:02 [U-Boot] (no subject) Troy Kisky
2012-09-19 0:02 ` [U-Boot] [PATCH 01/11] imximage: make header variable length Troy Kisky
2012-09-19 0:03 ` [U-Boot] [PATCH 02/11] imximage: check dcd_len as entries added Troy Kisky
2012-09-19 0:03 ` [U-Boot] [PATCH 03/11] imximage: enable word writes for version2 header Troy Kisky
2012-09-19 0:03 ` [U-Boot] [PATCH 04/11] imximage: cleanup parsing Troy Kisky
2012-09-19 0:03 ` [U-Boot] [PATCH 05/11] imximage: add expression evaluation Troy Kisky
2012-09-19 0:03 ` [U-Boot] [PATCH 06/11] imximage: add plugin commands Troy Kisky
2012-09-19 0:03 ` [U-Boot] [PATCH 07/11] imximage.cfg: run files through C preprocessor Troy Kisky
2012-09-19 0:03 ` [U-Boot] [PATCH 08/11] mx6: add plugin file for use with imximage.cfg Troy Kisky
2012-09-19 1:40 ` Troy Kisky
2012-09-19 0:03 ` [U-Boot] [PATCH 09/11] mx6qsabrelite: imximage.cfg: use symbols instead of hardcoded constants Troy Kisky
2012-09-19 0:03 ` [U-Boot] [PATCH 10/11] mx6qsabrelite: imximage.cfg: allow plugin to work Troy Kisky
2012-09-19 0:03 ` [U-Boot] [PATCH 11/11] RFC mx6qsabrelite: imximage.cfg: enable plugin mode Troy Kisky
2012-09-19 1:52 ` Troy Kisky
2012-09-22 2:38 ` [U-Boot] [PATCH V2 00/21] Add mx6solo/mx6duallite support Troy Kisky
2012-09-22 2:38 ` [U-Boot] [PATCH V2 01/21] imximage: make header variable length Troy Kisky
2012-09-23 10:57 ` Stefano Babic
2012-09-24 20:30 ` Troy Kisky
2012-09-25 11:08 ` Stefano Babic
2012-09-22 2:38 ` [U-Boot] [PATCH V2 02/21] imximage: check dcd_len as entries added Troy Kisky
2012-09-23 11:05 ` Stefano Babic
2012-09-24 20:54 ` Troy Kisky
2012-09-25 11:12 ` Stefano Babic
2012-09-22 2:39 ` [U-Boot] [PATCH V2 03/21] imximage: enable word writes for version2 header Troy Kisky
2012-09-22 2:39 ` [U-Boot] [PATCH V2 04/21] imximage: cleanup parsing Troy Kisky
2012-09-23 11:08 ` Stefano Babic
2012-09-24 20:59 ` Troy Kisky
2012-09-22 2:39 ` [U-Boot] [PATCH V2 05/21] imximage: add expression evaluation Troy Kisky
2012-09-23 14:56 ` Stefano Babic
2012-09-24 21:18 ` Troy Kisky
2012-09-22 2:39 ` [U-Boot] [PATCH V2 06/21] imximage: add plugin commands Troy Kisky
2012-09-23 15:38 ` Stefano Babic
2012-09-24 21:46 ` Troy Kisky
2012-09-22 2:39 ` [U-Boot] [PATCH V2 07/21] imximage.cfg: run files through C preprocessor Troy Kisky
2012-09-22 2:39 ` [U-Boot] [PATCH V2 08/21] mx6: add plugin file for use with imximage.cfg Troy Kisky
2012-09-22 4:06 ` Vikram Narayanan
2012-09-23 10:17 ` Stefano Babic
2012-09-23 16:23 ` Eric Nelson
2012-09-23 17:08 ` Stefano Babic
2012-09-23 23:29 ` Eric Nelson
2012-09-24 7:22 ` Stefano Babic
2012-09-24 13:48 ` Eric Nelson
2012-09-24 15:17 ` Stefano Babic
2012-09-24 22:23 ` Troy Kisky
2012-09-25 12:13 ` Stefano Babic
2012-09-24 20:46 ` Troy Kisky
2012-09-25 11:57 ` Stefano Babic
2012-09-22 2:39 ` [U-Boot] [PATCH V2 09/21] mx6q_4x_mt41j128.cfg: use symbols instead of hardcoded constants Troy Kisky
2012-09-22 2:39 ` [U-Boot] [PATCH V2 10/21] mx6q_4x_mt41j128.cfg: allow plugin to work Troy Kisky
2012-09-22 2:39 ` [U-Boot] [PATCH V2 11/21] mx6q_4x_mt41j128.cfg: enable plugin mode Troy Kisky
2012-09-22 2:39 ` [U-Boot] [PATCH V2 12/21] mx6q_4x_mt41j128.cfg: add comments Troy Kisky
2012-09-22 2:39 ` [U-Boot] [PATCH V2 13/21] mx6q_4x_mt41j128.cfg: use ddr3 mode for reset Troy Kisky
2012-09-22 2:39 ` [U-Boot] [PATCH V2 14/21] mx6q_4x_mt41j128.cfg: skip initiailizing non-existent memory Troy Kisky
2012-09-22 2:39 ` [U-Boot] [PATCH V2 15/21] mx6q_4x_mt41j128.cfg: reorder for more efficient storage Troy Kisky
2012-09-22 17:27 ` Fabio Estevam
2012-09-22 17:34 ` Troy Kisky
2012-09-22 2:39 ` [U-Boot] [PATCH V2 16/21] mx6q_4x_mt41j128.cfg: force ZQ calibration Troy Kisky
2012-09-22 2:39 ` [U-Boot] [PATCH V2 17/21] mx6: soc: add get_cpu_type Troy Kisky
2012-09-22 2:50 ` Fabio Estevam
2012-09-22 17:07 ` Troy Kisky
2012-09-23 14:59 ` Stefano Babic
2012-09-22 2:39 ` [U-Boot] [PATCH V2 18/21] arch-mx6: add mx6dl_pins.h Troy Kisky
2012-09-22 4:10 ` Vikram Narayanan
2012-09-22 17:17 ` Troy Kisky
2012-09-22 2:39 ` [U-Boot] [PATCH V2 19/21] mx6qsabrelite: add support for mx6 solo/duallite Troy Kisky
2012-09-22 4:12 ` Vikram Narayanan
2012-09-22 17:24 ` Troy Kisky
2012-09-22 2:39 ` [U-Boot] [PATCH V2 20/21] mx6q_4x_mt41j128.cfg: add mx6 solo/duallite support Troy Kisky
2012-09-22 2:39 ` [U-Boot] [PATCH V2 21/21] mx6qsabrelite: change CONFIG_SYS_PROMPT Troy Kisky
2012-09-22 6:21 ` [U-Boot] [PATCH V2 00/21] Add mx6solo/mx6duallite support Dirk Behme
2012-09-22 16:53 ` Troy Kisky
2012-10-04 1:47 ` [U-Boot] [PATCH V3 00/32] " Troy Kisky
2012-10-04 1:47 ` [U-Boot] [PATCH V3 01/32] imximage: check dcd_len as entries added Troy Kisky
2012-10-20 15:45 ` Stefano Babic
2012-10-04 1:47 ` [U-Boot] [PATCH V3 02/32] imximage: remove redundant setting of app_dest_ptr Troy Kisky
2012-10-08 13:17 ` Stefano Babic
2012-10-20 15:46 ` Stefano Babic
2012-10-04 1:47 ` [U-Boot] [PATCH V3 03/32] imximage: move flash_offset check to common location Troy Kisky
2012-10-08 13:19 ` Stefano Babic
2012-10-18 18:40 ` Troy Kisky
2012-10-19 8:01 ` Stefano Babic
2012-10-20 15:46 ` Stefano Babic
2012-10-04 1:47 ` [U-Boot] [PATCH V3 04/32] imximage: fix size of image to load Troy Kisky
2012-10-20 15:47 ` Stefano Babic
2012-10-04 1:47 ` [U-Boot] [PATCH V3 05/32] imximage: delay setting of image size Troy Kisky
2012-10-20 15:47 ` Stefano Babic
2012-10-04 1:47 ` [U-Boot] [PATCH V3 06/32] imximage: change parameters to set_imx_hdr Troy Kisky
2012-10-20 15:48 ` Stefano Babic
2012-10-04 1:47 ` [U-Boot] [PATCH V3 07/32] imximage: make set_imx_hdr_v1/v2 easier to read Troy Kisky
2012-10-20 15:48 ` Stefano Babic
2012-10-04 1:47 ` [U-Boot] [PATCH V3 08/32] imximage: make header variable length Troy Kisky
2012-10-20 15:52 ` Stefano Babic
2012-10-21 1:31 ` Troy Kisky
2012-10-21 8:35 ` Stefano Babic
2012-10-22 21:03 ` Troy Kisky
2012-11-28 1:31 ` [U-Boot] [PATCH V4 00/11] imximage series Troy Kisky
2012-11-28 1:31 ` [U-Boot] [PATCH V4 01/11] imximage: mx53 needs transfer length a multiple of 512 Troy Kisky
2012-11-28 9:27 ` Wolfgang Denk
2012-11-28 18:18 ` Troy Kisky
2012-11-28 20:25 ` Wolfgang Denk
2012-11-28 21:05 ` Troy Kisky
2012-11-28 21:35 ` Wolfgang Denk
2012-11-29 2:42 ` Troy Kisky
2012-11-29 5:28 ` Wolfgang Denk
2012-12-03 9:23 ` Stefano Babic
2012-12-03 9:12 ` Stefano Babic
2012-11-28 18:26 ` Troy Kisky
2012-11-28 10:34 ` Liu Hui-R64343
2012-11-28 1:31 ` [U-Boot] [PATCH V4 02/11] imximage: make header variable length Troy Kisky
2012-11-28 10:42 ` Liu Hui-R64343
2012-11-28 1:31 ` [U-Boot] [PATCH V4 03/11] imximage: remove static imximage_version Troy Kisky
2012-11-28 10:43 ` Liu Hui-R64343
2012-11-28 1:31 ` [U-Boot] [PATCH V4 04/11] imximage: prepare to move static variables to struct data_src Troy Kisky
2012-11-28 9:38 ` Wolfgang Denk
2012-11-28 18:36 ` Troy Kisky
2012-11-28 20:30 ` Wolfgang Denk
2012-11-28 1:31 ` [U-Boot] [PATCH V4 05/11] imximage: change parameters for set_dcd_val/set_imx_hdr Troy Kisky
2012-11-28 10:43 ` Liu Hui-R64343
2012-11-28 1:31 ` [U-Boot] [PATCH V4 06/11] imximage: move set_imx_hdr to struct data_src Troy Kisky
2012-11-28 10:45 ` Liu Hui-R64343
2012-11-28 1:31 ` [U-Boot] [PATCH V4 07/11] imximage: move set_dcd_val " Troy Kisky
2012-11-28 10:47 ` Liu Hui-R64343
2012-11-28 1:31 ` [U-Boot] [PATCH V4 08/11] imximage: enable word writes for version2 header Troy Kisky
2012-11-28 9:39 ` Wolfgang Denk
2012-11-28 20:40 ` Troy Kisky
2012-12-04 8:23 ` Stefano Babic
2012-11-28 10:47 ` Liu Hui-R64343
2012-11-28 1:31 ` [U-Boot] [PATCH V4 09/11] tools: add parse_helper file Troy Kisky
2012-11-28 9:41 ` Wolfgang Denk
2012-11-28 10:48 ` Liu Hui-R64343
2012-11-28 1:31 ` [U-Boot] [PATCH V4 10/11] imximage: use parse_helper functions Troy Kisky
2012-11-28 10:48 ` Liu Hui-R64343
2012-11-28 1:31 ` [U-Boot] [PATCH V4 11/11] parse_helper: add expression evaluation Troy Kisky
2012-11-28 10:49 ` Liu Hui-R64343
2012-11-28 9:30 ` [U-Boot] [PATCH V4 00/11] imximage series Wolfgang Denk
2012-11-28 18:29 ` Troy Kisky
2012-10-04 1:47 ` [U-Boot] [PATCH V3 09/32] imximage: remove static imximage_version Troy Kisky
2012-10-04 1:47 ` [U-Boot] [PATCH V3 10/32] imximage: prepare to move static variables to struct data_src Troy Kisky
2012-10-04 1:47 ` [U-Boot] [PATCH V3 11/32] imximage: change parameters for set_dcd_val/set_imx_hdr Troy Kisky
2012-10-04 1:47 ` [U-Boot] [PATCH V3 12/32] imximage: move set_imx_hdr to struct data_src Troy Kisky
2012-10-04 1:47 ` [U-Boot] [PATCH V3 13/32] imximage: move set_dcd_val " Troy Kisky
2012-10-04 1:47 ` [U-Boot] [PATCH V3 14/32] imximage: enable word writes for version2 header Troy Kisky
2012-10-04 1:47 ` [U-Boot] [PATCH V3 15/32] tools: add parse_helper file Troy Kisky
2012-10-04 1:47 ` [U-Boot] [PATCH V3 16/32] imximage: use parse_helper functions Troy Kisky
2012-10-04 1:47 ` [U-Boot] [PATCH V3 17/32] imximage.cfg: run files through C preprocessor Troy Kisky
2012-10-07 18:19 ` Eric Nelson [this message]
2012-10-08 19:11 ` Troy Kisky
2012-10-08 13:38 ` Stefano Babic
2012-10-08 21:48 ` Troy Kisky
2012-10-10 2:03 ` Troy Kisky
2012-10-11 11:11 ` Stefano Babic
2012-10-11 20:33 ` Troy Kisky
2012-10-11 22:27 ` stefano babic
2012-10-11 23:15 ` Tom Rini
2012-10-13 10:11 ` [U-Boot] File placement in Soc / board dirs and make issues (was: [PATCH V3 17/32] imximage.cfg: run files through C preprocessor) Albert ARIBAUD
2012-10-13 15:17 ` Tom Rini
2012-10-14 8:37 ` [U-Boot] File placement in Soc / board dirs and make issues Albert ARIBAUD
2012-10-15 1:24 ` Tom Rini
2012-10-23 6:30 ` Albert ARIBAUD
2012-10-17 20:32 ` [U-Boot] [PATCH V3 17/32] imximage.cfg: run files through C preprocessor Troy Kisky
2012-10-17 21:05 ` Tom Rini
2012-10-17 21:38 ` Troy Kisky
2012-10-17 22:29 ` Tom Rini
2012-10-04 1:47 ` [U-Boot] [PATCH V3 18/32] mx6q_4x_mt41j128.cfg: use symbols instead of hardcoded constants Troy Kisky
2012-10-04 1:47 ` [U-Boot] [PATCH V3 19/32] mx6q_4x_mt41j128.cfg: add comments Troy Kisky
2012-10-04 1:47 ` [U-Boot] [PATCH V3 20/32] mx6q_4x_mt41j128.cfg: use ddr3 mode for reset Troy Kisky
2012-10-04 1:47 ` [U-Boot] [PATCH V3 21/32] mx6q_4x_mt41j128.cfg: skip initiailizing non-existent memory Troy Kisky
2012-10-07 21:01 ` Eric Nelson
2012-10-04 1:47 ` [U-Boot] [PATCH V3 22/32] mx6q_4x_mt41j128.cfg: force ZQ calibration Troy Kisky
2012-10-04 1:47 ` [U-Boot] [PATCH V3 23/32] mx6: soc: update get_cpu_rev and get_imx_type for mx6solo/sololite Troy Kisky
2012-10-04 1:47 ` [U-Boot] [PATCH V3 24/32] mx6: use CONFIG_MX6 instead of CONFIG_MX6Q Troy Kisky
2012-10-08 13:41 ` Stefano Babic
2012-10-08 21:49 ` Troy Kisky
2012-10-04 1:47 ` [U-Boot] [PATCH V3 25/32] imx-common: cpu: add imx_ddr_size Troy Kisky
2012-10-08 13:06 ` Stefano Babic
2012-10-08 21:35 ` Troy Kisky
2012-10-04 1:47 ` [U-Boot] [PATCH V3 26/32] arch-mx6: add mx6dl_pins.h Troy Kisky
2012-10-04 1:47 ` [U-Boot] [PATCH V3 27/32] mx6qsabrelite: add support for mx6 solo/duallite Troy Kisky
2012-10-04 3:23 ` Otavio Salvador
2012-10-04 23:34 ` Troy Kisky
2012-10-08 13:47 ` Stefano Babic
2012-10-04 1:47 ` [U-Boot] [PATCH V3 28/32] mx6q_4x_mt41j128.cfg: add mx6 solo/duallite support Troy Kisky
2012-10-08 18:46 ` Eric Nelson
2012-10-08 21:08 ` Troy Kisky
2012-10-04 1:47 ` [U-Boot] [PATCH V3 29/32] Add boards for sabrelite variants mx6s(solo) and mx6dl(duallite) Troy Kisky
2012-10-04 1:47 ` [U-Boot] [PATCH V3 30/32] mx6qsabrelite: change CONFIG_SYS_PROMPT Troy Kisky
2012-10-04 3:00 ` Otavio Salvador
2012-10-04 23:28 ` Troy Kisky
2012-10-08 13:54 ` Stefano Babic
2012-10-08 21:58 ` Troy Kisky
2012-10-08 22:05 ` Fabio Estevam
2012-10-08 22:18 ` stefano babic
2012-10-08 22:22 ` Eric Nelson
2012-10-08 22:21 ` Eric Nelson
2012-10-04 1:47 ` [U-Boot] [PATCH V3 31/32] parse_helper: add expression evaluation Troy Kisky
2012-10-04 1:47 ` [U-Boot] [PATCH V3 32/32] imx-mkimage.h: use base + offset syntax Troy Kisky
2012-10-04 10:18 ` [U-Boot] [PATCH V3 00/32] Add mx6solo/mx6duallite support Albert ARIBAUD
2012-10-04 14:36 ` Eric Nelson
2012-10-04 19:51 ` Albert ARIBAUD
2012-10-04 14:52 ` Eric Nelson
2012-10-08 13:15 ` Stefano Babic
2012-10-08 23:58 ` Troy Kisky
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5071C795.5000208@boundarydevices.com \
--to=eric.nelson@boundarydevices.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox