From mboxrd@z Thu Jan  1 00:00:00 1970
From: Eric Nelson <eric.nelson@boundarydevices.com>
Date: Sun, 07 Oct 2012 11:19:01 -0700
Subject: [U-Boot] [PATCH V3 17/32] imximage.cfg: run files through C
	preprocessor
In-Reply-To: <1349315254-21151-18-git-send-email-troy.kisky@boundarydevices.com>
References: <1348281558-19520-1-git-send-email-troy.kisky@boundarydevices.com>	<1349315254-21151-1-git-send-email-troy.kisky@boundarydevices.com>
	<1349315254-21151-18-git-send-email-troy.kisky@boundarydevices.com>
Message-ID: <5071C795.5000208@boundarydevices.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hi Troy,

On 10/03/2012 06:47 PM, Troy Kisky wrote:
> The '#' used as comments in the files cause the preprocessor
> trouble, so change to /* */.
>
> Signed-off-by: Troy Kisky<troy.kisky@boundarydevices.com>
> ---
>   Makefile                                     |    3 +-
>   board/esg/ima3-mx53/imximage.cfg             |  120 ++++++-----
>   board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg |   90 ++++----
>   board/freescale/mx25pdk/imximage.cfg         |   77 +++----
>   board/freescale/mx51evk/imximage.cfg         |  114 +++++-----
>   board/freescale/mx53ard/imximage_dd3.cfg     |   83 ++++----
>   board/freescale/mx53evk/imximage.cfg         |   86 ++++----
>   board/freescale/mx53loco/imximage.cfg        |   83 ++++----
>   board/freescale/mx53smd/imximage.cfg         |   83 ++++----
>   board/freescale/mx6qarm2/imximage.cfg        |   88 ++++----
>   board/genesi/mx51_efikamx/imximage_mx.cfg    |  132 ++++++------
>   board/genesi/mx51_efikamx/imximage_sb.cfg    |  126 +++++------
>   board/ttcontrol/vision2/imximage_hynix.cfg   |  295 ++++++++++++++------------
>   13 files changed, 727 insertions(+), 653 deletions(-)
>
> diff --git a/Makefile b/Makefile
> index a40d4cc..64ff1b8 100644
> --- a/Makefile
> +++ b/Makefile
> @@ -431,7 +431,8 @@ $(obj)u-boot.img:	$(obj)u-boot.bin
>   		-d $<  $@
>
>   $(obj)u-boot.imx:       $(obj)u-boot.bin
> -		$(obj)tools/mkimage -n  $(CONFIG_IMX_CONFIG) -T imximage \
> +		$(CC) -E -x c $(CONFIG_IMX_CONFIG) -I./include -o $(obj)imxcfg.imx
> +		$(obj)tools/mkimage -n  $(obj)imxcfg.imx -T imximage \
>   		-e $(CONFIG_SYS_TEXT_BASE) -d $<  $@

This bit creates imxcfg.imx.

If built in-tree, the file will be reported as a new file in 'git status'.
Is there a reason it can't be deleted after the build?