From mboxrd@z Thu Jan  1 00:00:00 1970
From: Stefano Babic <sbabic@denx.de>
Date: Mon, 08 Oct 2012 23:03:05 +0200
Subject: [U-Boot] [PATCH 1/3] Add nitrogen6x board
In-Reply-To: <507337CD.6060608@boundarydevices.com>
References: <1349380149-8693-1-git-send-email-eric.nelson@boundarydevices.com>
	<1349380149-8693-2-git-send-email-eric.nelson@boundarydevices.com>
	<5072C6E8.7080702@denx.de> <5072F9D5.6060008@boundarydevices.com>
	<507337CD.6060608@boundarydevices.com>
Message-ID: <50733F89.8080000@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On 08/10/2012 22:30, Troy Kisky wrote:
> On 10/8/2012 9:05 AM, Eric Nelson wrote:
>> Hi Stefano,
>>
>> On 10/08/2012 05:28 AM, Stefano Babic wrote: +
>>>> +/* Command definition */
>>>> +#include<config_cmd_default.h>
>>>
>>> Move CONFIG_CMD_BMODE and CONFIG_CMD_SETEXPR here.
>>>
>>
>> That makes perfect sense.
>>
> Moving CONFIG_CMD_BMODE may break MX51 boards.
> Only mx6 and mx53 define boot_mode_apply function in soc.c
> 

???

My proposal is to move the two defines after including cmd_default.h,
but still in nitrogen6x.h. It is not possible to break mx51 boards.

Regards,
Stefano

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================