From mboxrd@z Thu Jan 1 00:00:00 1970 From: Troy Kisky Date: Mon, 08 Oct 2012 14:49:36 -0700 Subject: [U-Boot] [PATCH V3 24/32] mx6: use CONFIG_MX6 instead of CONFIG_MX6Q In-Reply-To: <5072D815.1030703@denx.de> References: <1348281558-19520-1-git-send-email-troy.kisky@boundarydevices.com> <1349315254-21151-1-git-send-email-troy.kisky@boundarydevices.com> <1349315254-21151-25-git-send-email-troy.kisky@boundarydevices.com> <5072D815.1030703@denx.de> Message-ID: <50734A70.8030205@boundarydevices.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 10/8/2012 6:41 AM, Stefano Babic wrote: > On 04/10/2012 03:47, Troy Kisky wrote: >> Use CONFIG_MX6 when the particular processor >> variant isn't important. >> >> Reserve the use of CONFIG_MX6Q to >> specifically test for quad cores variant. >> >> Signed-off-by: Troy Kisky >> --- >> drivers/gpio/mxc_gpio.c | 6 +++--- >> drivers/video/ipu_regs.h | 2 +- >> include/configs/mx6qarm2.h | 1 + >> include/configs/mx6qsabre_common.h | 1 + >> include/configs/mx6qsabrelite.h | 1 + >> 5 files changed, 7 insertions(+), 4 deletions(-) >> >> diff --git a/drivers/gpio/mxc_gpio.c b/drivers/gpio/mxc_gpio.c >> index 2c79bff..a388064 100644 >> --- a/drivers/gpio/mxc_gpio.c >> +++ b/drivers/gpio/mxc_gpio.c >> @@ -42,14 +42,14 @@ static unsigned long gpio_ports[] = { >> [1] = GPIO2_BASE_ADDR, >> [2] = GPIO3_BASE_ADDR, >> #if defined(CONFIG_MX25) || defined(CONFIG_MX27) || defined(CONFIG_MX51) || \ >> - defined(CONFIG_MX53) || defined(CONFIG_MX6Q) >> + defined(CONFIG_MX53) || defined(CONFIG_MX6) >> [3] = GPIO4_BASE_ADDR, >> #endif >> -#if defined(CONFIG_MX27) || defined(CONFIG_MX53) || defined(CONFIG_MX6Q) >> +#if defined(CONFIG_MX27) || defined(CONFIG_MX53) || defined(CONFIG_MX6) >> [4] = GPIO5_BASE_ADDR, >> [5] = GPIO6_BASE_ADDR, >> #endif >> -#if defined(CONFIG_MX53) || defined(CONFIG_MX6Q) >> +#if defined(CONFIG_MX53) || defined(CONFIG_MX6) >> [6] = GPIO7_BASE_ADDR, >> #endif >> }; >> diff --git a/drivers/video/ipu_regs.h b/drivers/video/ipu_regs.h >> index a43aa03..982e252 100644 >> --- a/drivers/video/ipu_regs.h >> +++ b/drivers/video/ipu_regs.h >> @@ -55,7 +55,7 @@ >> #define IPU_TPM_REG_BASE 0x01060000 >> #define IPU_DC_TMPL_REG_BASE 0x01080000 >> #define IPU_ISP_TBPR_REG_BASE 0x010C0000 >> -#elif defined(CONFIG_MX6Q) >> +#elif defined(CONFIG_MX6) >> #define IPU_CPMEM_REG_BASE 0x00100000 >> #define IPU_LUT_REG_BASE 0x00120000 >> #define IPU_SRM_REG_BASE 0x00140000 >> diff --git a/include/configs/mx6qarm2.h b/include/configs/mx6qarm2.h >> index 965bea3..8e5b81e 100644 >> --- a/include/configs/mx6qarm2.h >> +++ b/include/configs/mx6qarm2.h >> @@ -22,6 +22,7 @@ >> #ifndef __CONFIG_H >> #define __CONFIG_H >> >> +#define CONFIG_MX6 >> #define CONFIG_MX6Q >> #define CONFIG_DISPLAY_CPUINFO >> #define CONFIG_DISPLAY_BOARDINFO >> diff --git a/include/configs/mx6qsabre_common.h b/include/configs/mx6qsabre_common.h >> index 247e8d6..5a940da 100644 >> --- a/include/configs/mx6qsabre_common.h >> +++ b/include/configs/mx6qsabre_common.h >> @@ -17,6 +17,7 @@ >> #ifndef __MX6QSABRE_COMMON_CONFIG_H >> #define __MX6QSABRE_COMMON_CONFIG_H >> >> +#define CONFIG_MX6 >> #define CONFIG_MX6Q >> #define CONFIG_DISPLAY_CPUINFO >> #define CONFIG_DISPLAY_BOARDINFO >> diff --git a/include/configs/mx6qsabrelite.h b/include/configs/mx6qsabrelite.h >> index e7bf658..6a10232 100644 >> --- a/include/configs/mx6qsabrelite.h >> +++ b/include/configs/mx6qsabrelite.h >> @@ -22,6 +22,7 @@ >> #ifndef __CONFIG_H >> #define __CONFIG_H >> >> +#define CONFIG_MX6 >> #define CONFIG_MX6Q >> #define CONFIG_DISPLAY_CPUINFO >> #define CONFIG_DISPLAY_BOARDINFO >> > This changes affects also mx6qsabreauto and mx6qsabresd, that I have > already merged. > > Best regards, > Stefano Babic They should be covered by #include "mx6qsabre_common.h"