From mboxrd@z Thu Jan 1 00:00:00 1970 From: =?ISO-8859-1?Q?Andreas_Bie=DFmann?= Date: Tue, 09 Oct 2012 23:51:54 +0200 Subject: [U-Boot] [PATCH v2 0/3] Enable MMC support for at91sam9x5ek board. In-Reply-To: <5073F83D.1090106@atmel.com> References: <1347610926-18223-1-git-send-email-josh.wu@atmel.com> <5073F83D.1090106@atmel.com> Message-ID: <50749C7A.3020104@googlemail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Josh, On 09.10.12 12:11, Josh Wu wrote: > Hi, Andreas > > Any feedback of these patches? short answer: no ;) I think they could go into next (no obvious objections), but I would like to do some runtime tests on avr32 before. Beside that, if you do not insist on applying them ASAP to next I would like to wait until the release next Monday and apply the patches to u-boot-atmel/master then. Is that OK for you? Best regards Andreas Bie?mann > > Best Regards, > Josh Wu > > On 9/14/2012 4:22 PM, Josh Wu wrote: >> This patch series enable MCI0 solt in at91sam9x5ek board. >> >> Josh Wu (3): >> mmc: at91: add multi block read/write support. >> ARM: at91sam9x5: enable MCI0 support for 9x5ek board. >> mmc: at91: use max timeout value. It will avoid some situation that >> timeout happened. >> >> arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c | 15 +++++++++++++++ >> board/atmel/at91sam9x5ek/at91sam9x5ek.c | 10 ++++++++++ >> drivers/mmc/gen_atmel_mci.c | 15 +++++++++++++-- >> include/atmel_mci.h | 7 ++++++- >> include/configs/at91sam9x5ek.h | 10 ++++++++++ >> 5 files changed, 54 insertions(+), 3 deletions(-) >> >