From: Heiko Schocher <hs@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v3 00/10] i2c for R-mobile
Date: Tue, 16 Oct 2012 05:55:58 +0200 [thread overview]
Message-ID: <507CDACE.9080408@denx.de> (raw)
In-Reply-To: <1347599285-11830-1-git-send-email-koba@kmckk.co.jp>
Hello Tetsuyuki Kobayashi,
On 14.09.2012 07:07, Tetsuyuki Kobayashi wrote:
> Iwamatu-san, thank you for review. This is v3 patch for sh_i2c.
> Changes for v3:
> - call i2c_finish before returning i2c_probe, i2c_read, i2c_write even if error occured. Without this, it fails to boot Linux kernel after using "i2c probe" command.
> - use setbits/clrbits macro as Iwamatsu-san pointed.
>
> Please check patch 5,6 and 10. The rest is not changed.
>
> This patch set is based on arm/rmobile branch of u-boot-sh.git.
>
>
> Tetsuyuki Kobayashi (10):
> i2c: sh_i2c.c: support iccl and icch extension
> i2c: sh_i2c.c: correct BUSY bit define in ICSR
> i2c: sh_i2c.c: adjust for SH73A0
> i2c: sh_i2c.c: support I2C2, I2C3 and I2C4
> i2c: sh_i2c: enable i2c_probe
> i2c: sh_i2c.c: check error in i2c_read and i2c_write
> i2c: sh_i2c.c: remove unused function
> arm: rmobile: kzm9g: enable I2C1
> arm: rmobile: kzm9g: enable I2C2
> i2c: sh_i2c: use setbits/clrbits macro
>
> board/kmc/kzm9g/kzm9g.c | 7 ++-
> drivers/i2c/sh_i2c.c | 139 ++++++++++++++++++++++++++++++++---------------
> include/configs/kzm9g.h | 8 ++-
> 3 files changed, 107 insertions(+), 47 deletions(-)
Applied this patchset (exept patch "i2c: sh_i2c.c: remove unused
function", as this patch is already in mainline) to u-boot-i2c master
Thanks!
bye,
Heiko
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
prev parent reply other threads:[~2012-10-16 3:55 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-09-11 5:58 [U-Boot] [PATCH 0/3] i2c for R-mobile Tetsuyuki Kobayashi
2012-09-11 5:58 ` [U-Boot] [PATCH 1/3] i2c: sh_i2c.c: support iccl and icch extension Tetsuyuki Kobayashi
2012-09-12 1:50 ` Nobuhiro Iwamatsu
2012-09-11 5:58 ` [U-Boot] [PATCH 2/3] i2c: sh_i2c.c: correct BUSY bit define in ICSR Tetsuyuki Kobayashi
2012-09-12 1:49 ` Nobuhiro Iwamatsu
2012-09-11 5:58 ` [U-Boot] [PATCH 3/3] i2c: sh_i2c.c: adjust for SH73A0 Tetsuyuki Kobayashi
2012-09-12 1:50 ` Nobuhiro Iwamatsu
2012-09-12 8:20 ` [U-Boot] [PATCH v2 0/9] i2c for R-mobile Tetsuyuki Kobayashi
2012-09-12 8:20 ` [U-Boot] [PATCH v2 1/9] i2c: sh_i2c.c: support iccl and icch extension Tetsuyuki Kobayashi
2012-09-12 8:20 ` [U-Boot] [PATCH v2 2/9] i2c: sh_i2c.c: correct BUSY bit define in ICSR Tetsuyuki Kobayashi
2012-09-12 8:21 ` [U-Boot] [PATCH v2 3/9] i2c: sh_i2c.c: adjust for SH73A0 Tetsuyuki Kobayashi
2012-09-12 8:21 ` [U-Boot] [PATCH v2 4/9] i2c: sh_i2c.c: support I2C2, I2C3 and I2C4 Tetsuyuki Kobayashi
2012-09-13 5:13 ` Nobuhiro Iwamatsu
2012-09-12 8:21 ` [U-Boot] [PATCH v2 5/9] i2c: sh_i2c: enable i2c_probe Tetsuyuki Kobayashi
2012-09-12 8:21 ` [U-Boot] [PATCH v2 6/9] i2c: sh_i2c.c: check error in i2c_read and i2c_write Tetsuyuki Kobayashi
2012-09-13 5:17 ` Nobuhiro Iwamatsu
2012-09-12 8:21 ` [U-Boot] [PATCH v2 7/9] i2c: sh_i2c.c: remove unused function Tetsuyuki Kobayashi
2012-09-12 8:21 ` [U-Boot] [PATCH v2 8/9] arm: rmobile: kzm9g: enable I2C1 Tetsuyuki Kobayashi
2012-09-12 8:21 ` [U-Boot] [PATCH v2 9/9] arm: rmobile: kzm9g: enable I2C2 Tetsuyuki Kobayashi
2012-09-12 8:46 ` [U-Boot] [RESEND PATCH v2 0/9] i2c for R-mobile Tetsuyuki Kobayashi
2012-09-12 8:46 ` [U-Boot] [PATCH v2 1/9] i2c: sh_i2c.c: support iccl and icch extension Tetsuyuki Kobayashi
2012-09-13 5:16 ` Nobuhiro Iwamatsu
2012-09-12 8:46 ` [U-Boot] [PATCH v2 2/9] i2c: sh_i2c.c: correct BUSY bit define in ICSR Tetsuyuki Kobayashi
2012-09-12 8:46 ` [U-Boot] [PATCH v2 3/9] i2c: sh_i2c.c: adjust for SH73A0 Tetsuyuki Kobayashi
2012-09-12 8:46 ` [U-Boot] [PATCH v2 4/9] i2c: sh_i2c.c: support I2C2, I2C3 and I2C4 Tetsuyuki Kobayashi
2012-09-12 8:46 ` [U-Boot] [PATCH v2 5/9] i2c: sh_i2c: enable i2c_probe Tetsuyuki Kobayashi
2012-09-13 5:15 ` Nobuhiro Iwamatsu
2012-09-12 8:46 ` [U-Boot] [PATCH v2 6/9] i2c: sh_i2c.c: check error in i2c_read and i2c_write Tetsuyuki Kobayashi
2012-09-12 8:46 ` [U-Boot] [PATCH v2 7/9] i2c: sh_i2c.c: remove unused function Tetsuyuki Kobayashi
2012-09-13 5:17 ` Nobuhiro Iwamatsu
2012-09-12 8:46 ` [U-Boot] [PATCH v2 8/9] arm: rmobile: kzm9g: enable I2C1 Tetsuyuki Kobayashi
2012-09-13 5:18 ` Nobuhiro Iwamatsu
2012-09-12 8:46 ` [U-Boot] [PATCH v2 9/9] arm: rmobile: kzm9g: enable I2C2 Tetsuyuki Kobayashi
2012-09-13 5:27 ` Nobuhiro Iwamatsu
2012-09-13 5:26 ` [U-Boot] [RESEND PATCH v2 0/9] i2c for R-mobile Nobuhiro Iwamatsu
2012-09-13 7:03 ` Tetsuyuki Kobayashi
2012-09-14 5:07 ` [U-Boot] [PATCH v3 00/10] " Tetsuyuki Kobayashi
2012-09-14 5:07 ` [U-Boot] [PATCH v3 01/10] i2c: sh_i2c.c: support iccl and icch extension Tetsuyuki Kobayashi
2012-09-14 5:07 ` [U-Boot] [PATCH v3 02/10] i2c: sh_i2c.c: correct BUSY bit define in ICSR Tetsuyuki Kobayashi
2012-09-14 5:07 ` [U-Boot] [PATCH v3 03/10] i2c: sh_i2c.c: adjust for SH73A0 Tetsuyuki Kobayashi
2012-09-14 5:07 ` [U-Boot] [PATCH v3 04/10] i2c: sh_i2c.c: support I2C2, I2C3 and I2C4 Tetsuyuki Kobayashi
2012-09-14 5:08 ` [U-Boot] [PATCH v3 05/10] i2c: sh_i2c: enable i2c_probe Tetsuyuki Kobayashi
2012-09-14 5:08 ` [U-Boot] [PATCH v3 06/10] i2c: sh_i2c.c: check error in i2c_read and i2c_write Tetsuyuki Kobayashi
2012-09-14 5:08 ` [U-Boot] [PATCH v3 07/10] i2c: sh_i2c.c: remove unused function Tetsuyuki Kobayashi
2012-09-14 5:08 ` [U-Boot] [PATCH v3 08/10] arm: rmobile: kzm9g: enable I2C1 Tetsuyuki Kobayashi
2012-09-14 5:08 ` [U-Boot] [PATCH v3 09/10] arm: rmobile: kzm9g: enable I2C2 Tetsuyuki Kobayashi
2012-09-14 5:08 ` [U-Boot] [PATCH v3 10/10] i2c: sh_i2c: use setbits/clrbits macro Tetsuyuki Kobayashi
2012-09-18 0:57 ` Nobuhiro Iwamatsu
2012-10-16 3:55 ` Heiko Schocher [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=507CDACE.9080408@denx.de \
--to=hs@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox