From: "Matthias Weißer" <weisserm@arcor.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] Uncompress error with LZO
Date: Fri, 19 Oct 2012 09:43:20 +0200 [thread overview]
Message-ID: <50810498.6000508@arcor.de> (raw)
In-Reply-To: <20121018172132.GU27770@bill-the-cat>
18.10.2012 19:21, schrieb Tom Rini:
> On Thu, Oct 18, 2012 at 02:24:20PM +0200, Matthias Wei?er wrote:
>> Hi
>>
>> I get some misterious errors from time to time when decompressing an
>> LZO compressed image. The output is as follows
>>
>> zmx25> bootm 0x82000000
>> ## Booting kernel from Legacy Image at 82000000 ...
>> Image Name: zmx25-gfx ifs
>> Image Type: ARM QNX Kernel Image (lzo compressed)
>> Data Size: 8181868 Bytes = 7.8 MiB
>> Load Address: 80000000
>> Entry Point: 80000000
>> Verifying Checksum ... OK
>> Uncompressing Kernel Image ... LZO: uncompress or overwrite error
>> -5 - must RESET board to recover
>> resetting ...
>>
>> RAM is from 0x80000000 to 0x83ffffff. The image was transfered using
>> TFTP and has an uncompressed size of about 20MB. If I change
>> something in the image so that the compressed data is different it
>> works. If an image is "broken" it is always broken so the behavior
>> is reproducable. I compress the image under windows using:
>
> So you're saying that changing the source image results in good, or bad,
> behavior correct? Can you try taking a bad source image and using lzop
> on Linux instead?
Right. Small changes in the source image (which is not a linux kernel)
can lead to a corrupted image. lzop under linux can decompress the image
successfully. I also checked if it is possible to compress the image and
make an u-boot image out of the compressed data under linux. This also
worked without problems but when decompressing that image the error is
the same.
lzo1x_decompress_safe from the current linux kernel is the same as that
one used in u-boot.
Any ideas?
Regards
Matthias
next prev parent reply other threads:[~2012-10-19 7:43 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-18 12:24 [U-Boot] Uncompress error with LZO Matthias Weißer
2012-10-18 17:21 ` Tom Rini
2012-10-18 17:31 ` Tom Rini
2012-10-19 7:43 ` Matthias Weißer [this message]
2012-10-19 15:34 ` Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=50810498.6000508@arcor.de \
--to=weisserm@arcor.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox