From: stefano babic <sbabic@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] boards: remove the no longer used CONFIG_EHCI_DCACHE
Date: Mon, 22 Oct 2012 23:47:58 +0200 [thread overview]
Message-ID: <5085BF0E.4070707@denx.de> (raw)
In-Reply-To: <1350938147-3740-1-git-send-email-jeroen@myspectrum.nl>
Am 22/10/2012 22:35, schrieb Jeroen Hofstee:
> CONFIG_EHCI_DCACHE was removed by commit b8adb12
> "USB: Drop cache flush bloat in EHCI-HCD". Remove the defines from
> the boards configs as well.
>
> Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
> cc: Marek Vasut <marex@denx.de>
> cc: Stefan Roese <sr@denx.de>
> cc: Tom Rini <trini@ti.com>
> cc: Wolfgang Denk <wd@denx.de>
> cc: Thierry Reding <thierry.reding@avionic-design.de>
> cc: Tom Warren <twarren@nvidia.com>
> cc: Stephen Warren <swarren@nvidia.com>
> cc: Stefano Babic <sbabic@denx.de>
> ---
> include/configs/lwmon5.h | 1 -
> include/configs/mcx.h | 1 -
> include/configs/omap3_beagle.h | 1 -
> include/configs/sequoia.h | 3 ---
> include/configs/tam3517-common.h | 2 --
> include/configs/tegra20-common.h | 1 -
> include/configs/vct.h | 1 -
> 7 files changed, 10 deletions(-)
>
> diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h
> index 2d33ebc..2ebcd16 100644
> --- a/include/configs/lwmon5.h
> +++ b/include/configs/lwmon5.h
> @@ -401,7 +401,6 @@
> #define CONFIG_USB_EHCI /* Enable EHCI USB support */
> #define CONFIG_USB_EHCI_PPC4XX /* on PPC4xx platform */
> #define CONFIG_SYS_PPC4XX_USB_ADDR 0xe0000300
> -#define CONFIG_EHCI_DCACHE /* with dcache handling support */
> #define CONFIG_EHCI_MMIO_BIG_ENDIAN
> #define CONFIG_EHCI_DESC_BIG_ENDIAN
> #define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* re-init HCD after CMD_RESET */
> diff --git a/include/configs/mcx.h b/include/configs/mcx.h
> index 359522a..6251ab7 100644
> --- a/include/configs/mcx.h
> +++ b/include/configs/mcx.h
> @@ -114,7 +114,6 @@
> #define CONFIG_USB_EHCI_OMAP
> #define CONFIG_USB_ULPI
> #define CONFIG_USB_ULPI_VIEWPORT_OMAP
> -/*#define CONFIG_EHCI_DCACHE*/ /* leave it disabled for now */
> #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 154
> #define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO 152
> #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
> diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
> index f79f996..9d435ca 100644
> --- a/include/configs/omap3_beagle.h
> +++ b/include/configs/omap3_beagle.h
> @@ -131,7 +131,6 @@
> #define CONFIG_USB_EHCI
>
> #define CONFIG_USB_EHCI_OMAP
> -/*#define CONFIG_EHCI_DCACHE*/ /* leave it disabled for now */
> #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 147
>
> #define CONFIG_USB_ULPI
> diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h
> index 8e6954e..dd5d7cd 100644
> --- a/include/configs/sequoia.h
> +++ b/include/configs/sequoia.h
> @@ -288,9 +288,6 @@
> #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
> #define CONFIG_EHCI_MMIO_BIG_ENDIAN
> #define CONFIG_EHCI_DESC_BIG_ENDIAN
> -#ifdef CONFIG_4xx_DCACHE
> -#define CONFIG_EHCI_DCACHE
> -#endif
> #else /* CONFIG_USB_EHCI */
> #define CONFIG_USB_OHCI_NEW
> #define CONFIG_SYS_OHCI_BE_CONTROLLER
> diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h
> index dd7757c..ac534ac 100644
> --- a/include/configs/tam3517-common.h
> +++ b/include/configs/tam3517-common.h
> @@ -106,8 +106,6 @@
> #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
> #define CONFIG_USB_STORAGE
>
> -/* #define CONFIG_EHCI_DCACHE */
> -
> /* commands to include */
> #include <config_cmd_default.h>
>
> diff --git a/include/configs/tegra20-common.h b/include/configs/tegra20-common.h
> index dc7444d..9d532f4 100644
> --- a/include/configs/tegra20-common.h
> +++ b/include/configs/tegra20-common.h
> @@ -100,7 +100,6 @@
> */
> #define CONFIG_USB_EHCI_TXFIFO_THRESH 10
> #define CONFIG_EHCI_IS_TDI
> -#define CONFIG_EHCI_DCACHE
>
> /* Total I2C ports on Tegra20 */
> #define TEGRA_I2C_NUM_CONTROLLERS 4
> diff --git a/include/configs/vct.h b/include/configs/vct.h
> index b4b0949..7aeb668 100644
> --- a/include/configs/vct.h
> +++ b/include/configs/vct.h
> @@ -136,7 +136,6 @@
> */
> #define CONFIG_USB_EHCI /* Enable EHCI USB support */
> #define CONFIG_USB_EHCI_VCT /* on VCT platform */
> -#define CONFIG_EHCI_DCACHE /* with dcache handling support */
> #define CONFIG_EHCI_MMIO_BIG_ENDIAN
> #define CONFIG_EHCI_DESC_BIG_ENDIAN
> #define CONFIG_EHCI_IS_TDI
>
Acked-by: Stefano Babic <sbabic@denx.de>
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
next prev parent reply other threads:[~2012-10-22 21:47 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-22 20:35 [U-Boot] [PATCH] boards: remove the no longer used CONFIG_EHCI_DCACHE Jeroen Hofstee
2012-10-22 20:40 ` Marek Vasut
2012-10-22 21:47 ` stefano babic [this message]
2012-10-23 7:23 ` Stefan Roese
2012-10-23 7:27 ` Thierry Reding
2012-10-23 15:16 ` Tom Rini
2012-10-23 22:05 ` Marek Vasut
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5085BF0E.4070707@denx.de \
--to=sbabic@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox