[U-Boot] [PATCH 1/5] mx53loco: Allow booting a zImage kernel

[U-Boot] [PATCH 1/5] mx53loco: Allow booting a zImage kernel

[Fabio Estevam]

From: Fabio Estevam <fabio.estevam@freescale.com>

Allow booting a zImage kernel.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
---
 include/configs/mx53loco.h |    1 +
 1 file changed, 1 insertion(+)

diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h
index 0658dd3..25672c0 100644
--- a/include/configs/mx53loco.h
+++ b/include/configs/mx53loco.h
@@ -103,6 +103,7 @@
 
 /* Command definition */
 #include <config_cmd_default.h>
+#define CONFIG_CMD_BOOTZ
 
 #undef CONFIG_CMD_IMLS
 
-- 
1.7.9.5

[U-Boot] [PATCH 2/5] mx25pdk: Allow booting a zImage kernel

[Fabio Estevam]

From: Fabio Estevam <fabio.estevam@freescale.com>

Allow booting a zImage kernel.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
---
 include/configs/mx25pdk.h |    1 +
 1 file changed, 1 insertion(+)

diff --git a/include/configs/mx25pdk.h b/include/configs/mx25pdk.h
index bd000a7..1dddf50 100644
--- a/include/configs/mx25pdk.h
+++ b/include/configs/mx25pdk.h
@@ -83,6 +83,7 @@
 
 /* U-Boot commands */
 #include <config_cmd_default.h>
+#define CONFIG_CMD_BOOTZ
 #define CONFIG_CMD_CACHE
 
 /* Ethernet */
-- 
1.7.9.5

[U-Boot] [PATCH 3/5] mx51evk: Allow booting a zImage kernel

[Fabio Estevam]

From: Fabio Estevam <fabio.estevam@freescale.com>

Allow booting a zImage kernel.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
---
 include/configs/mx51evk.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/configs/mx51evk.h b/include/configs/mx51evk.h
index d3edcba..8cf59fe 100644
--- a/include/configs/mx51evk.h
+++ b/include/configs/mx51evk.h
@@ -144,7 +144,7 @@
  ***********************************************************/
 
 #include <config_cmd_default.h>
-
+#define CONFIG_CMD_BOOTZ
 #undef CONFIG_CMD_IMLS
 
 #define CONFIG_CMD_DATE
-- 
1.7.9.5

[U-Boot] [PATCH 4/5] mx35pdk: Allow booting a zImage kernel

[Fabio Estevam]

From: Fabio Estevam <fabio.estevam@freescale.com>

Allow booting a zImage kernel.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
---
 include/configs/mx35pdk.h |    1 +
 1 file changed, 1 insertion(+)

diff --git a/include/configs/mx35pdk.h b/include/configs/mx35pdk.h
index 826c912..d8f28f3 100644
--- a/include/configs/mx35pdk.h
+++ b/include/configs/mx35pdk.h
@@ -94,6 +94,7 @@
 
 #include <config_cmd_default.h>
 
+#define CONFIG_CMD_BOOTZ
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_DHCP
 #define CONFIG_BOOTP_SUBNETMASK
-- 
1.7.9.5

[U-Boot] [PATCH 5/5] mx6qsabre_common: Allow booting a zImage kernel

[Fabio Estevam]

From: Fabio Estevam <fabio.estevam@freescale.com>

Allow booting a zImage kernel.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
---
 include/configs/mx6qsabre_common.h |    1 +
 1 file changed, 1 insertion(+)

diff --git a/include/configs/mx6qsabre_common.h b/include/configs/mx6qsabre_common.h
index bfb9cd4..fa38d79 100644
--- a/include/configs/mx6qsabre_common.h
+++ b/include/configs/mx6qsabre_common.h
@@ -72,6 +72,7 @@
 /* Command definition */
 #include <config_cmd_default.h>
 
+#define CONFIG_CMD_BOOTZ
 #undef CONFIG_CMD_IMLS
 
 #define CONFIG_BOOTDELAY               3
-- 
1.7.9.5

[U-Boot] [PATCH 1/5] mx53loco: Allow booting a zImage kernel

[Robert Nelson]

On Wed, Oct 24, 2012 at 2:44 PM, Fabio Estevam <festevam@gmail.com> wrote:
> From: Fabio Estevam <fabio.estevam@freescale.com>
>
> Allow booting a zImage kernel.
>
> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
> ---
>  include/configs/mx53loco.h |    1 +
>  1 file changed, 1 insertion(+)
>
> diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h
> index 0658dd3..25672c0 100644
> --- a/include/configs/mx53loco.h
> +++ b/include/configs/mx53loco.h
> @@ -103,6 +103,7 @@
>
>  /* Command definition */
>  #include <config_cmd_default.h>
> +#define CONFIG_CMD_BOOTZ

Fabio,

Any thoughts on also enabling "define CONFIG_SUPPORT_RAW_INITRD" at
the same time, otherwise you'd still have to run mkimage on the other
half "initrd.img-$(uname -r)" when using booting an initramfs with
your main kernel image..

Regards,

-- 
Robert Nelson
http://www.rcn-ee.com/

[U-Boot] [PATCH 1/5] mx53loco: Allow booting a zImage kernel

[Fabio Estevam]

Hi Robert,

On Thu, Oct 25, 2012 at 12:07 AM, Robert Nelson <robertcnelson@gmail.com> wrote:

> Fabio,
>
> Any thoughts on also enabling "define CONFIG_SUPPORT_RAW_INITRD" at
> the same time, otherwise you'd still have to run mkimage on the other
> half "initrd.img-$(uname -r)" when using booting an initramfs with
> your main kernel image..

Sure, no problem. We can enable CONFIG_SUPPORT_RAW_INITRD as well.

Stefano,

Should I enable  CONFIG_SUPPORT_RAW_INITRD as part of the same patch
series or on a separate one?

Thanks,

Fabio Estevam

[U-Boot] [PATCH 1/5] mx53loco: Allow booting a zImage kernel

[Stefano Babic]

Am 25/10/2012 04:15, schrieb Fabio Estevam:
> Hi Robert,
> 
> On Thu, Oct 25, 2012 at 12:07 AM, Robert Nelson <robertcnelson@gmail.com> wrote:
> 
>> Fabio,
>>
>> Any thoughts on also enabling "define CONFIG_SUPPORT_RAW_INITRD" at
>> the same time, otherwise you'd still have to run mkimage on the other
>> half "initrd.img-$(uname -r)" when using booting an initramfs with
>> your main kernel image..
> 
> Sure, no problem. We can enable CONFIG_SUPPORT_RAW_INITRD as well.
> 
> Stefano,
> 
> Should I enable  CONFIG_SUPPORT_RAW_INITRD as part of the same patch
> series or on a separate one?

Your decision, both are fine with me.

Regards,

Stefano Babic


-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

[U-Boot] [PATCH 1/5] mx53loco: Allow booting a zImage kernel

[Fabio Estevam]

On Thu, Oct 25, 2012 at 5:00 AM, Stefano Babic <sbabic@denx.de> wrote:

>> Should I enable  CONFIG_SUPPORT_RAW_INITRD as part of the same patch
>> series or on a separate one?
>
> Your decision, both are fine with me.

Ok, then I prefer to keep this series as is.

I will send a separate one for adding CONFIG_SUPPORT_RAW_INITRD  only
for mx53loco as requested by Robert.

Regards,

Fabio Estevam

[U-Boot] [PATCH 1/5] mx53loco: Allow booting a zImage kernel

[Stefano Babic]

Am 25/10/2012 13:16, schrieb Fabio Estevam:
> On Thu, Oct 25, 2012 at 5:00 AM, Stefano Babic <sbabic@denx.de> wrote:
> 
>>> Should I enable  CONFIG_SUPPORT_RAW_INITRD as part of the same patch
>>> series or on a separate one?
>>
>> Your decision, both are fine with me.
> 
> Ok, then I prefer to keep this series as is.
> 
> I will send a separate one for adding CONFIG_SUPPORT_RAW_INITRD  only
> for mx53loco as requested by Robert.

Ok, fine. This series is then ready to be merged.

Regards,
Stefano Babic


-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

[U-Boot] [PATCH 2/5] mx25pdk: Allow booting a zImage kernel

[Stefano Babic]

On 24/10/2012 21:44, Fabio Estevam wrote:
> From: Fabio Estevam <fabio.estevam@freescale.com>
> 
> Allow booting a zImage kernel.
> 
> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
> ---
>  include/configs/mx25pdk.h |    1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/include/configs/mx25pdk.h b/include/configs/mx25pdk.h
> index bd000a7..1dddf50 100644
> --- a/include/configs/mx25pdk.h
> +++ b/include/configs/mx25pdk.h
> @@ -83,6 +83,7 @@
>  
>  /* U-Boot commands */
>  #include <config_cmd_default.h>
> +#define CONFIG_CMD_BOOTZ
>  #define CONFIG_CMD_CACHE
>  
>  /* Ethernet */
> 
Applied to u-boot-imx, thanks.

Best regards,
Stefano Babic


-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

[U-Boot] [PATCH 3/5] mx51evk: Allow booting a zImage kernel

[Stefano Babic]

On 24/10/2012 21:44, Fabio Estevam wrote:
> From: Fabio Estevam <fabio.estevam@freescale.com>
> 
> Allow booting a zImage kernel.
> 
> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
> ---

Applied to u-boot-imx, thanks.

Best regards,
Stefano Babic



-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

[U-Boot] [PATCH 4/5] mx35pdk: Allow booting a zImage kernel

[Stefano Babic]

On 24/10/2012 21:44, Fabio Estevam wrote:
> From: Fabio Estevam <fabio.estevam@freescale.com>
> 
> Allow booting a zImage kernel.
> 
> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
> ---

Applied to u-boot-imx, thanks.

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

[U-Boot] [PATCH 5/5] mx6qsabre_common: Allow booting a zImage kernel

[Stefano Babic]

On 24/10/2012 21:44, Fabio Estevam wrote:
> From: Fabio Estevam <fabio.estevam@freescale.com>
> 
> Allow booting a zImage kernel.
> 
> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
> ---

Applied to u-boot-imx, thanks.

Best regards,
Stefano Babic




-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

[U-Boot] [PATCH 1/5] mx53loco: Allow booting a zImage kernel

[Stefano Babic]

On 24/10/2012 21:44, Fabio Estevam wrote:
> From: Fabio Estevam <fabio.estevam@freescale.com>
> 
> Allow booting a zImage kernel.
> 
> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
> ---
>  include/configs/mx53loco.h |    1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h
> index 0658dd3..25672c0 100644
> --- a/include/configs/mx53loco.h
> +++ b/include/configs/mx53loco.h
> @@ -103,6 +103,7 @@
>  
>  /* Command definition */
>  #include <config_cmd_default.h>
> +#define CONFIG_CMD_BOOTZ
>  
>  #undef CONFIG_CMD_IMLS
>  
> 

Applied to u-boot-imx, thanks.

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================