From: Eric Nelson <eric.nelson@boundarydevices.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] mx6qsabrelite: commands not recognized
Date: Thu, 25 Oct 2012 08:44:08 -0700 [thread overview]
Message-ID: <50895E48.6020004@boundarydevices.com> (raw)
In-Reply-To: <508947AA.8020100@boundarydevices.com>
Hi Fabio,
On 10/25/2012 07:07 AM, Eric Nelson wrote:
> Hi Fabio,
>
> On 10/25/2012 06:28 AM, Fabio Estevam wrote:
>> Hi,
>>
>> Using the latest u-boot-imx tree, I am getting the following on a mx6qsabrelite:
>>
>> U-Boot 2012.10-09478-gab857f2 (Oct 25 2012 - 11:24:04)
>>
>> <snip>
>>
>> Hit any key to stop autoboot: 0
>> MX6QSABRELITE U-Boot> save
>> Unknown command 'save' - try 'help'
>> MX6QSABRELITE U-Boot>
>>
>> Basically no commands are recognized.
>>
>> Haven't started bisecting this yet, but just wanted to check if others
>> see the same issue.
>>
>
> You might want to check how you're programming this.
>
> I saw this issue when U-Boot first went above 256k (the SPI-NOR
> upgrade script only erased 0x40000 bytes).
>
> I'll test later today.
>
Worked for me...
U-Boot 2012.10-01993-gab857f2 (Oct 25 2012 - 08:00:14)
CPU: Freescale i.MX6Q rev1.0 at 792 MHz
Reset cause: POR
Board: MX6Q-Sabre Lite
DRAM: 1 GiB
MMC: FSL_SDHC: 0, FSL_SDHC: 1
*** Warning - bad CRC, using default environment
auto-detected panel HDMI
enable_hdmi: setup HDMI monitor
Display: HDMI (1024x768)
In: serial
Out: serial
Err: serial
Net: FEC [PRIME]
Warning: FEC using MAC address from net device
Hit any key to stop autoboot: 0
MX6QSABRELITE U-Boot >
MX6QSABRELITE U-Boot > help
? - alias for 'help'
base - print or set address offset
bdinfo - print Board Info structure
prev parent reply other threads:[~2012-10-25 15:44 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-25 13:28 [U-Boot] mx6qsabrelite: commands not recognized Fabio Estevam
2012-10-25 14:07 ` Eric Nelson
2012-10-25 15:44 ` Eric Nelson [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=50895E48.6020004@boundarydevices.com \
--to=eric.nelson@boundarydevices.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox