From mboxrd@z Thu Jan 1 00:00:00 1970 From: Oleksandr Tymoshenko Date: Fri, 26 Oct 2012 10:48:06 -0700 Subject: [U-Boot] [PATCH 1/2] mmc: add bcm2835 driver In-Reply-To: <20121026173202.GB31793@bill-the-cat> References: <1351054248-5604-1-git-send-email-swarren@wwwdotorg.org> <20121026173202.GB31793@bill-the-cat> Message-ID: <508ACCD6.5050609@bluezbox.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 10/26/2012 10:32 AM, Tom Rini wrote: > On Tue, Oct 23, 2012 at 10:50:47PM -0600, Stephen Warren wrote: >> This adds a simple driver for the BCM2835's SD controller. >> >> Workarounds are implemented for: >> * Register writes can't be too close to each-other in time, or they will >> be lost. >> * Register accesses must all be 32-bit, so implement custom accessors. >> >> This code was extracted from: >> git://github.com/gonzoua/u-boot-pi.git master >> which was created by Oleksandr Tymoshenko. >> >> Portions of the code there were obviously based on the Linux kernel at: >> git://github.com/raspberrypi/linux.git rpi-3.2.27 >> >> No s-o-b tags were present in either location. > Um, that's a bit worrying to me. Wolfgang? I didn't have much experience with s-o-b stuff, so excuse my ignorance. Is there official procedure, or is it enough to state that I sign off on everything in git://github.com/gonzoua/u-boot-pi.git master authored by me?