From: Jaehoon Chung <jh80.chung@samsung.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] powerpc/esdhc: force the bus width to 4bit
Date: Wed, 31 Oct 2012 13:51:47 +0900 [thread overview]
Message-ID: <5090AE63.2040807@samsung.com> (raw)
In-Reply-To: <20121030183541.06766bf7@amdc308.digital.local>
Hi, Lukasz,
>>>>>> For the current u-boot codes, only 4bit/1bit SD/SDHC bus width is
>>>>>
>>>>> support.
>>>>>
>>>>>> So for MMC card, we also support 4bit bus width, otherwiase, we
>>>>>> will
>>>>>
>>>>>> get the 12bit bus width, which is not correct:
>>>>> Andy ... can you please explain? I don't quite understand the
>>>>> problem, I thought we had no problem supporting 8bit mmc (esp. if
>>>>> the controller handles that for us mostly).
>>>>
>>>> Yes, the controller support 8bit MMC.
>>>>
>>>> FSL ESDHC driver set the host_caps = MMC_MODE_4BIT | MMC_MODE_8BIT;
>>>> But, the current codes for MMC card has been changed to:
>>>>
>>>> } else {
>>>> width = ((mmc->host_caps & MMC_MODE_MASK_WIDTH_BITS) >>
>>>> MMC_MODE_WIDTH_BITS_SHIFT);
>
> Hmm... looks like it is code done by me :-)
> So little explanation shall be given.
>
> This code is necessary for some targets (like Samsung's Goni) which can
> only support 4 bit MMC mode.
>
>>>> for (; width >= 0; width--) {
>>>> ....
>>>>
>>>> So for FSL ESDHC, the width = 3, after implement mmc_switch
>>>> successfully, will set the bus to 4 * width. Therefore, I will get
>>>> the 12bit (4 x 3) bus width.
>> This problem is MMC subsystem's bug.
>> I think good that will modify the code in mmc.c.
>> If caps is set to MMC_MODE_4BIT | MMC_MODE_8BIT,
>> we can see the 12bit support with using "mmcinfo" command
>>
>
> The mmc_set_bus_width(mmc, 4 * width) in conjunction to above code
> causes the problem.
then how about using the width[idx] like kernel?
Best Regards,
Jaehoon Chung
>
> I agree, that this code shall be refactored.
> Lei, what do you think?
>
>
>> Best Regards,
>> Jaehoon Chung
>>
>>>>
>>>> Below is the old codes (width = 2):
>>>> } else {
>>>> for (width = EXT_CSD_BUS_WIDTH_8; width >= 0;
>>>> width--) {
>>> [...]
>>>
>>>
>>> Uh, so it's a bug in the MMC subsystem?
>>> Best regards,
>>> Marek Vasut
>>> _______________________________________________
>>> U-Boot mailing list
>>> U-Boot at lists.denx.de
>>> http://lists.denx.de/mailman/listinfo/u-boot
>>>
>>
>> _______________________________________________
>> U-Boot mailing list
>> U-Boot at lists.denx.de
>> http://lists.denx.de/mailman/listinfo/u-boot
>
>
>
next prev parent reply other threads:[~2012-10-31 4:51 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-23 6:26 [U-Boot] [PATCH] powerpc/esdhc: force the bus width to 4bit Chang-Ming.Huang at freescale.com
2012-10-23 7:24 ` Marek Vasut
2012-10-23 9:23 ` Huang Changming-R66093
2012-10-23 9:50 ` Marek Vasut
2012-10-24 3:11 ` Huang Changming-R66093
2012-10-30 8:43 ` Jaehoon Chung
2012-10-30 17:35 ` Lukasz Majewski
2012-10-31 4:51 ` Jaehoon Chung [this message]
2012-10-31 8:20 ` Lukasz Majewski
2012-10-31 10:43 ` Jaehoon Chung
2012-11-01 4:09 ` Andy Fleming
2012-11-02 1:54 ` Huang Changming-R66093
2012-11-02 2:03 ` Jaehoon Chung
2012-11-02 2:15 ` Huang Changming-R66093
2012-11-02 3:40 ` Marek Vasut
2012-11-02 7:38 ` Lukasz Majewski
[not found] <1351586621-1990-1-git-send-email-Chang-Ming.Huang@freescale.com>
[not found] ` <110EED8CC96DFC488B7E717A2027A27C203263@039-SN1MPN1-003.039d.mgd.msft.net>
[not found] ` <110EED8CC96DFC488B7E717A2027A27C2058C8@039-SN1MPN1-003.039d.mgd.msft.net>
2012-11-01 2:29 ` Marek Vasut
[not found] ` <201211010326.29763.marex@denx.de>
[not found] ` <110EED8CC96DFC488B7E717A2027A27C20B95C@039-SN1MPN1-004.039d.mgd.msft.net>
2012-11-01 3:05 ` Marek Vasut
2012-11-01 3:20 ` Huang Changming-R66093
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5090AE63.2040807@samsung.com \
--to=jh80.chung@samsung.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox