From: Stefano Babic <sbabic@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 12/13] mx35pdk: Add support for OTG
Date: Wed, 07 Nov 2012 17:33:48 +0100 [thread overview]
Message-ID: <509A8D6C.3070003@denx.de> (raw)
In-Reply-To: <1335645678.731097.1352305670907.JavaMail.root@advansee.com>
On 07/11/2012 17:27, Beno?t Th?baudeau wrote:
> Hi Stefano,
>
> On Wednesday, November 7, 2012 5:16:47 PM, Stefano Babic wrote:
>> On 05/11/2012 21:13, Beno?t Th?baudeau wrote:
>>> Add support for the OTG port on the mx35pdk Personality board.
>>>
>>> Signed-off-by: Beno?t Th?baudeau <benoit.thebaudeau@advansee.com>
>>> Cc: Stefano Babic <sbabic@denx.de>
>>> Cc: Marek Vasut <marex@denx.de>
>>> ---
>>> Note: I have tested this on a similar board, but not on the mx35pdk
>>> itself. So
>>> please, someone test on mx35pdk. Stefano?
>>>
>>
>> It works on mx35pdk, too ;-)
>>
>> Tested-by: Stefano Babic <sbabic@denx.de>
>
> Great! Thanks for testing.
>
> Are you also OK with the other patches in this series? Can I send a v2 with just
> the change that Marek asked for 13/13?
IMHO they are ok, I have not found relevant issues.
Best regards,
Stefano
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
next prev parent reply other threads:[~2012-11-07 16:33 UTC|newest]
Thread overview: 54+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-11-05 20:09 [U-Boot] [PATCH 01/13] mx31: Move EHCI definitions to ehci-fsl.h Benoît Thébaudeau
2012-11-05 20:10 ` [U-Boot] [PATCH 02/13] ehci-mxc: Clean up Benoît Thébaudeau
2012-11-05 20:10 ` [U-Boot] [PATCH 03/13] ehci-mx5: " Benoît Thébaudeau
2012-11-05 20:10 ` [U-Boot] [PATCH 04/13] ehci-mx5: Fix OC_DIS usage Benoît Thébaudeau
2012-11-05 20:11 ` [U-Boot] [PATCH 05/13] ehci-mx5: Fix OPM usage Benoît Thébaudeau
2012-11-05 20:11 ` [U-Boot] [PATCH 06/13] ehci-mx5: Fix *PM usage for i.MX53 Benoît Thébaudeau
2012-11-05 20:11 ` [U-Boot] [PATCH 07/13] ehci-mx5: Add missing OC_DIS " Benoît Thébaudeau
2012-11-05 20:12 ` [U-Boot] [PATCH 08/13] ehci-mxc: Make EHCI power/oc polarities configurable Benoît Thébaudeau
2012-11-05 20:12 ` [U-Boot] [PATCH 09/13] ehci-mxc: Make i.MX25 EHCI configurable Benoît Thébaudeau
2012-11-05 20:12 ` [U-Boot] [PATCH 10/13] ehci-mxc: Define host offsets Benoît Thébaudeau
2012-11-05 20:13 ` [U-Boot] [PATCH 11/13] ehci-mxc: Add support for i.MX35 Benoît Thébaudeau
2012-11-05 20:13 ` [U-Boot] [PATCH 12/13] mx35pdk: Add support for OTG Benoît Thébaudeau
2012-11-07 14:30 ` Stefano Babic
2012-11-07 16:16 ` Stefano Babic
2012-11-07 16:27 ` Benoît Thébaudeau
2012-11-07 16:33 ` Stefano Babic [this message]
2012-11-05 20:13 ` [U-Boot] [PATCH 13/13] ehci-mx5: Make board_ehci_hcd_init() optional Benoît Thébaudeau
2012-11-05 22:57 ` Marek Vasut
2012-11-05 23:34 ` Benoît Thébaudeau
2012-11-05 22:55 ` [U-Boot] [PATCH 01/13] mx31: Move EHCI definitions to ehci-fsl.h Marek Vasut
2012-11-07 16:31 ` Stefano Babic
2012-11-08 20:27 ` [U-Boot] [PATCH v2 " Benoît Thébaudeau
2012-11-08 20:28 ` [U-Boot] [PATCH v2 02/13] ehci-mxc: Clean up Benoît Thébaudeau
2012-11-08 20:28 ` [U-Boot] [PATCH v2 03/13] ehci-mx5: " Benoît Thébaudeau
2012-11-08 20:28 ` [U-Boot] [PATCH v2 04/13] ehci-mx5: Fix OC_DIS usage Benoît Thébaudeau
2012-11-08 20:29 ` [U-Boot] [PATCH v2 05/13] ehci-mx5: Fix OPM usage Benoît Thébaudeau
2012-11-08 20:29 ` [U-Boot] [PATCH v2 06/13] ehci-mx5: Fix *PM usage for i.MX53 Benoît Thébaudeau
2012-11-08 20:29 ` [U-Boot] [PATCH v2 07/13] ehci-mx5: Add missing OC_DIS " Benoît Thébaudeau
2012-11-08 20:29 ` [U-Boot] [PATCH v2 08/13] ehci-mxc: Make EHCI power/oc polarities configurable Benoît Thébaudeau
2012-11-08 20:30 ` [U-Boot] [PATCH v2 09/13] ehci-mxc: Make i.MX25 EHCI configurable Benoît Thébaudeau
2012-11-08 20:30 ` [U-Boot] [PATCH v2 10/13] ehci-mxc: Define host offsets Benoît Thébaudeau
2012-11-08 20:30 ` [U-Boot] [PATCH v2 11/13] ehci-mxc: Add support for i.MX35 Benoît Thébaudeau
2012-11-08 20:31 ` [U-Boot] [PATCH v2 12/13] mx35pdk: Add support for OTG Benoît Thébaudeau
2012-11-08 20:31 ` [U-Boot] [PATCH v2 13/13] ehci-mx5/6: Make board_ehci_hcd_init() optional Benoît Thébaudeau
2012-11-10 7:42 ` [U-Boot] [PATCH v2 01/13] mx31: Move EHCI definitions to ehci-fsl.h Stefano Babic
2012-11-10 12:37 ` Benoît Thébaudeau
2012-11-10 12:46 ` Albert ARIBAUD
2012-11-10 12:47 ` Albert ARIBAUD
2012-11-10 13:51 ` Benoît Thébaudeau
2012-11-10 16:45 ` stefano babic
2012-11-13 19:55 ` [U-Boot] [PATCH v3 " Benoît Thébaudeau
2012-11-13 19:55 ` [U-Boot] [PATCH v3 02/13] ehci-mxc: Clean up Benoît Thébaudeau
2012-11-16 8:29 ` Stefano Babic
2012-11-13 19:56 ` [U-Boot] [PATCH v3 03/13] ehci-mx5: " Benoît Thébaudeau
2012-11-13 19:56 ` [U-Boot] [PATCH v3 04/13] ehci-mx5: Fix OC_DIS usage Benoît Thébaudeau
2012-11-13 19:56 ` [U-Boot] [PATCH v3 05/13] ehci-mx5: Fix OPM usage Benoît Thébaudeau
2012-11-13 19:56 ` [U-Boot] [PATCH v3 06/13] ehci-mx5: Fix *PM usage for i.MX53 Benoît Thébaudeau
2012-11-13 19:57 ` [U-Boot] [PATCH v3 07/13] ehci-mx5: Add missing OC_DIS " Benoît Thébaudeau
2012-11-13 19:57 ` [U-Boot] [PATCH v3 08/13] ehci-mxc: Make EHCI power/oc polarities configurable Benoît Thébaudeau
2012-11-13 19:57 ` [U-Boot] [PATCH v3 09/13] ehci-mxc: Make i.MX25 EHCI configurable Benoît Thébaudeau
2012-11-13 19:57 ` [U-Boot] [PATCH v3 10/13] ehci-mxc: Define host offsets Benoît Thébaudeau
2012-11-13 19:58 ` [U-Boot] [PATCH v3 11/13] ehci-mxc: Add support for i.MX35 Benoît Thébaudeau
2012-11-13 19:58 ` [U-Boot] [PATCH v3 12/13] mx35pdk: Add support for OTG Benoît Thébaudeau
2012-11-13 19:58 ` [U-Boot] [PATCH v3 13/13] ehci-mx5/6: Make board_ehci_hcd_init() optional Benoît Thébaudeau
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=509A8D6C.3070003@denx.de \
--to=sbabic@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox