From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefano Babic Date: Wed, 07 Nov 2012 18:49:27 +0100 Subject: [U-Boot] [PATCH] mx35pdk:Use IMX_GPIO_NR macro In-Reply-To: <509A9C4B.9030301@gmail.com> References: <509A9C4B.9030301@gmail.com> Message-ID: <509A9F27.9010307@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 07/11/2012 18:37, Ashok Kumar Reddy wrote: > Use IMX_GPO_NR macro > > Signed-off-by: Ashok Kumar Reddy > --- > board/freescale/mx35pdk/mx35pdk.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/board/freescale/mx35pdk/mx35pdk.c b/board/freescale/mx35pdk/mx35pdk.c > index 7cb6b30..e9b3827 100644 > --- a/board/freescale/mx35pdk/mx35pdk.c > +++ b/board/freescale/mx35pdk/mx35pdk.c > @@ -246,7 +246,7 @@ int board_late_init(void) > mxc_request_iomux(MX35_PIN_COMPARE, MUX_CONFIG_GPIO); > mxc_iomux_set_input(MUX_IN_GPIO1_IN_5, INPUT_CTL_PATH0); > > - gpio_direction_output(37, 1); > + gpio_direction_output(IMX_GPIO_NR(2, 5), 1); > } > > val = mc9sdz60_reg_read(MC9SDZ60_REG_GPIO_1) | 0x04; > Acked-by: Stefano Babic Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================