From mboxrd@z Thu Jan 1 00:00:00 1970 From: Andreas Puls Date: Mon, 12 Nov 2012 13:40:05 +0100 Subject: [U-Boot] U-Boot 2012.10 PXA270 - saveenv / Kernel issue In-Reply-To: <20121111223516.GA503@crg> References: <509FF823.6060907@gmx.net> <20121111223516.GA503@crg> Message-ID: <50A0EE25.9040001@gmx.net> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hello Rommel, Am 11.11.2012 23:35, schrieb Rommel G Custodio: > [...] > > As an addition to Andreas' fine comment. > > Are you using the stock configuration file from the latest u-boot? > Yes. Im using the stock configuriont from U-Boot 2012.10 > Also verify your boot/bootm command. My boot comand points to the load adress 0xC0000 whre i've copied the kernel. > I will assume that you copy the kernel from flash to DRAM, if so > please make sure you are reading from the correct flash offset and > reading the correct kernel size. Now i must asked you a dumpd question: Is that fixed in the Kernel / uImage ? Kind regards Andreas -------------- next part -------------- A non-text attachment was scrubbed... Name: smime.p7s Type: application/pkcs7-signature Size: 4107 bytes Desc: S/MIME Kryptografische Unterschrift URL: