From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefano Babic Date: Mon, 19 Nov 2012 08:53:08 +0100 Subject: [U-Boot] [PATCH] ehci-mxc: Fix host power mask bit for i.MX25 In-Reply-To: <1524076324.1485516.1353084384637.JavaMail.root@advansee.com> References: <1524076324.1485516.1353084384637.JavaMail.root@advansee.com> Message-ID: <50A9E564.7030106@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 16/11/2012 17:46, Beno?t Th?baudeau wrote: > The correct bit for H1_PM is 16, not 8, which is the DP pull-up impedance > selection bit. > > This issue has been reported by Eric B?nard and fixed by > Christoph Fritz on Linux, from which these #define-s > had been copied. > > Signed-off-by: Beno?t Th?baudeau > Cc: Stefano Babic > Cc: Marek Vasut > --- > .../drivers/usb/host/ehci-mxc.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git u-boot-imx-f22e4fa.orig/drivers/usb/host/ehci-mxc.c u-boot-imx-f22e4fa/drivers/usb/host/ehci-mxc.c > index 7c5f71c..352ad86 100644 > --- u-boot-imx-f22e4fa.orig/drivers/usb/host/ehci-mxc.c > +++ u-boot-imx-f22e4fa/drivers/usb/host/ehci-mxc.c > @@ -37,7 +37,7 @@ > #define MX25_H1_SIC_SHIFT 21 > #define MX25_H1_SIC_MASK (0x3 << MX25_H1_SIC_SHIFT) > #define MX25_H1_PP_BIT (1 << 18) > -#define MX25_H1_PM_BIT (1 << 8) > +#define MX25_H1_PM_BIT (1 << 16) > #define MX25_H1_IPPUE_UP_BIT (1 << 7) > #define MX25_H1_IPPUE_DOWN_BIT (1 << 6) > #define MX25_H1_TLL_BIT (1 << 5) > Applied to u-boot-imx, thanks. Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================