From mboxrd@z Thu Jan 1 00:00:00 1970 From: Graeme Russ Date: Sun, 25 Nov 2012 13:22:08 +1100 Subject: [U-Boot] Reg Bootstrapping u-boot on x86-64 for tizen In-Reply-To: <1353740891.02621651@apps.rackspace.com> References: <1353569402.811926239@apps.rackspace.com> <201211230138.13410.marex@denx.de> <1353649583.776115952@apps.rackspace.com> <50AF1ADB.4070909@gmail.com> <1353665409.27427632@apps.rackspace.com> <50AF55C7.80508@gmail.com> <1353740891.02621651@apps.rackspace.com> Message-ID: <50B180D0.2030702@gmail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Manohar, On 11/24/2012 06:08 PM, manohar.betham at smartplayin.com wrote: > > Hi, > > I am getting the following error after running make all for coreboot target,from /usr/bin/ld.bfd.real: skipping incompatible /home/manoharb/Kernel_Tizen/intel_tizen/latest/u-boot/arch/x86/lib/libgcc.a when searching for -lgcc > /usr/bin/ld.bfd.real: cannot find -lgcc > make: *** [u-boot] Error 1 What toolchain (and version) are you using? I've never seen ld.bfd.real before Regards, Graeme > > Please help me. > > Best Regards, > Manohar > > > > -----Original Message----- > From: "Graeme Russ" > Sent: Friday, November 23, 2012 4:23pm > To: manohar.betham at smartplayin.com > Cc: "Marek Vasut" , u-boot at lists.denx.de, "Simon Glass" > Subject: Re: [U-Boot] Reg Bootstrapping u-boot on x86-64 for tizen > > > > Hi Manohar, > > On 11/23/2012 09:10 PM, manohar.betham at smartplayin.com wrote: >> >> Dear Graeme, >> >> Thank you! >> >> I downloaded the u-boot-x86 on Ubuntu 11.10 loaded(Linux smart-OptiPlex-390 3.0.0-26-generic x86_64 GNU/Linux) intel i5 M1H61R-MB montherboard from the given below link. >> >> http://git.denx.de/?p=u-boot/u-boot-x86.git;a=summary > > Depending on when you downloaded it, you may not have the latest mainline > which is at: > > http://git.denx.de/?p=u-boot.git;a=summary > > Nevertheless, you will have the latest x86 patches > >> >> and yes I am planning to run u-boot on x86_64 machine and my target is also x86_64 machine are the same . >> cd u-boot-x86 > > Hmm, I don't think U-Boot is what your after. There are a few problems you > will be faced with: > - There is no ACPI support (no power management) > - No System Management Mode (SMM) support > - No chipset support (No RAM initialisation) > - No Cache-As-RAM init code > > Unless you have at least these covered, you will brick your board if you > try to flash U-Boot. You might instead take a look at coreboot > >> opened the boards.config file and appended my board details in the config file . >> >> MIH61R-MB x86 x86 MIH61R-MB GenuineIntel - >> # Target ARCH CPU Board name Vendor SoC Options >> >> >> and then run the below commands and i didnot modify any code other than that above line. >> ..................................................................................................................................... >> >> manoharb at smart-OptiPlex-390:~/Kernel_Tizen/intel_tizen/u-boot-x86$ vim boards.cfg >> manoharb at smart-OptiPlex-390:~/Kernel_Tizen/intel_tizen/u-boot-x86$ make distclean >> /bin/bash: i386-linux-gcc: command not found >> /bin/bash: i386-linux-gcc: command not found > > [snip] > > Ah, I now see that the patch I thought had been applied has not :( > > You will need this patch: > > http://patchwork.ozlabs.org/patch/155727/ > > Regards, > > Graeme > >> ............................................................................................................................................................................................................................................................................................................................................... >> >> Please help me what are the files i need to modify and provide me the documentation. >> >> Thank you! >> Best Regards, >> Manohar >> 8790215215 >> >> >> -----Original Message----- >> From: "Graeme Russ" >> Sent: Friday, November 23, 2012 12:12pm >> To: manohar.betham at smartplayin.com >> Cc: "Marek Vasut" , u-boot at lists.denx.de >> Subject: Re: [U-Boot] Reg Bootstrapping u-boot on x86-64 for tizen >> >> >> >> Hi Manohar, >> >> On 11/23/2012 04:46 PM, manohar.betham at smartplayin.com wrote: >>> >>> Dear Marek, >>> >>> Thank you for the reply. >>> >>> Can you please send me the steps/procedure to build/support u-boot on x86_64 bit (Intel(R) Core(TM) i5-2400 CPU @ 3.10GHz. >> >> I build the x86 U-Boot target on an x86_64 i7 Linux (Fedora) system using >> the standard GNU gcc package. There was an issue with the Makefile and >> there was a need to manually create some toolchain symlinks, but the was >> rectified some time ago. Are you using the latest mainline U-Boot from >> git.denx.de? If so, what errors are you getting - please provide a copy of >> your build output. >> >>> We need help from you is there any documentation to enable x86_64 bit pc or links to post my query. >>> >>> What are the config/code i need to change to make my pc as host & target are the same. >> >> Are you planning on running U-Boot on an x86_64 machine? If so, you will >> need to create code to support that - Current U-Boot only supports 32-bit >> x86 targets. The sandbox target (designed for testing on a Linux host, not >> for downloading onto a board) should run on an x86_64 host. >> >>> >>> Please help us to build the u-boot on x86_64. >> >> Please provide more detail - what have you tried? What was the result? The >> build scripts should work as is on a properly configured x86_64 build machine >> >> Regards, >> >> Graeme >> >> P.S. Please stop top posting - thanks >> >>> >>> Thank you! >>> Best Regards, >>> Manohar >>> 8790215215 >>> >>> >>> >>> -----Original Message----- >>> From: "Marek Vasut" >>> Sent: Friday, November 23, 2012 6:08am >>> To: u-boot at lists.denx.de >>> Cc: manohar.betham at smartplayin.com, "Graeme Russ" >>> Subject: Re: [U-Boot] Reg Bootstrapping u-boot on x86-64 for tizen >>> >>> >>> >>> Dear manohar.betham at smartplayin.com, >>> >>>> Hi, >>>> >>>> I am Manohar,started boot the X86-64 (Intel(R) Core(TM) i5-2400 CPU @ >>>> 3.10GHz) using u-boot to work for TIZEN . >>>> >>>> As I am unable to configure/build my pc using u-boot-x86 . >>>> >>>> I request you please help me how to configure it/build the u-boot-x86 on my >>>> pc as my pc is loaded with Ubuntu 11.10 and my aim is to make my PC as >>>> host and target are the same. >>>> >>>> Please resolve the issue/is my PC support for the u-boot. >>> >>> You need to compile it on a 32bit machine ... or install 32bit cross compiler >>> ... u-boot doesn't support x86/64. Patches are welcome though. >>> >>> Best regards, >>> Marek Vasut >>> >> >> > >