[U-Boot] [PATCHv3 4/4] at91sam9x5ek: add USB configuration

[Bo Shen <voice.shen@atmel.com>]

On 11/30/2012 17:18, richard.genoud at gmail.com wrote:
> From: Richard Genoud <richard.genoud@gmail.com>
>
> Signed-off-by: Richard Genoud <richard.genoud@gmail.com>

Acked-by: Bo Shen <voice.shen@atmel.com

Best Regards,
Bo Shen

> ---
>   include/configs/at91sam9x5ek.h |   23 +++++++++++++++++++++++
>   1 files changed, 23 insertions(+), 0 deletions(-)
>
> diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h
> index 5e5f9c1..915714f 100644
> --- a/include/configs/at91sam9x5ek.h
> +++ b/include/configs/at91sam9x5ek.h
> @@ -91,6 +91,13 @@
>   #define CONFIG_CMD_SF
>   #define CONFIG_CMD_MMC
>   #define CONFIG_CMD_FAT
> +#define CONFIG_CMD_USB
> +
> +/*
> + * define CONFIG_USB_EHCI to enable USB Hi-Speed (aka 2.0)
> + * NB: in this case, USB 1.1 devices won't be recognized.
> + */
> +
>
>   /* SDRAM */
>   #define CONFIG_NR_DRAM_BANKS		1
> @@ -158,6 +165,22 @@
>   #define CONFIG_NET_RETRY_COUNT		20
>   #define CONFIG_MACB_SEARCH_PHY
>
> +/* USB */
> +#ifdef CONFIG_CMD_USB
> +#ifdef CONFIG_USB_EHCI
> +#define CONFIG_USB_EHCI_ATMEL
> +#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS	2
> +#else
> +#define CONFIG_USB_OHCI_NEW
> +#define CONFIG_SYS_USB_OHCI_CPU_INIT
> +#define CONFIG_SYS_USB_OHCI_REGS_BASE		ATMEL_BASE_OHCI
> +#define CONFIG_SYS_USB_OHCI_SLOT_NAME		"at91sam9x5"
> +#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	3
> +#endif
> +#define CONFIG_USB_ATMEL
> +#define CONFIG_USB_STORAGE
> +#endif
> +
>   #define CONFIG_SYS_LOAD_ADDR		0x22000000	/* load address */
>
>   #define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
>