* [U-Boot] [PATCH] arm: at91sam9x5: add dataflash boot support
@ 2012-12-07 7:37 Bo Shen
2012-12-09 21:35 ` Andreas Bießmann
` (2 more replies)
0 siblings, 3 replies; 6+ messages in thread
From: Bo Shen @ 2012-12-07 7:37 UTC (permalink / raw)
To: u-boot
Add dataflash boot support on at91sam9x5ek board
Signed-off-by: Bo Shen <voice.shen@atmel.com>
---
boards.cfg | 1 +
include/configs/at91sam9x5ek.h | 10 ++++++++++
2 files changed, 11 insertions(+)
diff --git a/boards.cfg b/boards.cfg
index 70a1569..e799d9b 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -97,6 +97,7 @@ at91sam9m10g45ek_nandflash arm arm926ejs at91sam9m10g45ek atmel
at91sam9rlek_dataflash arm arm926ejs at91sam9rlek atmel at91 at91sam9rlek:AT91SAM9RL,SYS_USE_DATAFLASH
at91sam9rlek_nandflash arm arm926ejs at91sam9rlek atmel at91 at91sam9rlek:AT91SAM9RL,SYS_USE_NANDFLASH
at91sam9x5ek_nandflash arm arm926ejs at91sam9x5ek atmel at91 at91sam9x5ek:AT91SAM9X5,SYS_USE_NANDFLASH
+at91sam9x5ek_dataflash arm arm926ejs at91sam9x5ek atmel at91 at91sam9x5ek:AT91SAM9X5,SYS_USE_DATAFLASH
at91sam9x5ek_spiflash arm arm926ejs at91sam9x5ek atmel at91 at91sam9x5ek:AT91SAM9X5,SYS_USE_SPIFLASH
at91sam9x5ek_mmc arm arm926ejs at91sam9x5ek atmel at91 at91sam9x5ek:AT91SAM9X5,SYS_USE_MMC
at91sam9xeek_dataflash_cs0 arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9XE,SYS_USE_DATAFLASH_CS0
diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h
index 1317582..a034ed0 100644
--- a/include/configs/at91sam9x5ek.h
+++ b/include/configs/at91sam9x5ek.h
@@ -178,6 +178,16 @@
#define CONFIG_BOOTCOMMAND "sf probe 0; " \
"sf read 0x22000000 0x100000 0x300000; " \
"bootm 0x22000000"
+#elif defined(CONFIG_SYS_USE_DATAFLASH)
+/* bootstrap + u-boot + env + linux in data flash */
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_ENV_OFFSET 0x4200
+#define CONFIG_ENV_SIZE 0x4200
+#define CONFIG_ENV_SECT_SIZE 0x210
+#define CONFIG_ENV_SPI_MAX_HZ 30000000
+#define CONFIG_BOOTCOMMAND "sf probe 0; " \
+ "sf read 0x22000000 0x84000 0x294000; " \
+ "bootm 0x22000000"
#else /* CONFIG_SYS_USE_MMC */
/* bootstrap + u-boot + env + linux in mmc */
#define CONFIG_ENV_IS_IN_MMC
--
1.7.9.5
^ permalink raw reply related [flat|nested] 6+ messages in thread* [U-Boot] [PATCH] arm: at91sam9x5: add dataflash boot support
2012-12-07 7:37 [U-Boot] [PATCH] arm: at91sam9x5: add dataflash boot support Bo Shen
@ 2012-12-09 21:35 ` Andreas Bießmann
2012-12-09 21:49 ` Andreas Bießmann
2013-01-09 16:17 ` Andreas Bießmann
2013-01-12 12:25 ` Albert ARIBAUD
2 siblings, 1 reply; 6+ messages in thread
From: Andreas Bießmann @ 2012-12-09 21:35 UTC (permalink / raw)
To: u-boot
Dear Bo Shen,
On 07.12.2012 08:37, Bo Shen wrote:
> Add dataflash boot support on at91sam9x5ek board
sorry, but this patch do not apply cleanly on top of current
u-boot-arm/master. It seems the mmc (SYS_USE_MMC) is missing there. Can
you please rebase or provide the other patches?
Best regards
Andreas Bie?mann
>
> Signed-off-by: Bo Shen <voice.shen@atmel.com>
> ---
> boards.cfg | 1 +
> include/configs/at91sam9x5ek.h | 10 ++++++++++
> 2 files changed, 11 insertions(+)
>
> diff --git a/boards.cfg b/boards.cfg
> index 70a1569..e799d9b 100644
> --- a/boards.cfg
> +++ b/boards.cfg
> @@ -97,6 +97,7 @@ at91sam9m10g45ek_nandflash arm arm926ejs at91sam9m10g45ek atmel
> at91sam9rlek_dataflash arm arm926ejs at91sam9rlek atmel at91 at91sam9rlek:AT91SAM9RL,SYS_USE_DATAFLASH
> at91sam9rlek_nandflash arm arm926ejs at91sam9rlek atmel at91 at91sam9rlek:AT91SAM9RL,SYS_USE_NANDFLASH
> at91sam9x5ek_nandflash arm arm926ejs at91sam9x5ek atmel at91 at91sam9x5ek:AT91SAM9X5,SYS_USE_NANDFLASH
> +at91sam9x5ek_dataflash arm arm926ejs at91sam9x5ek atmel at91 at91sam9x5ek:AT91SAM9X5,SYS_USE_DATAFLASH
> at91sam9x5ek_spiflash arm arm926ejs at91sam9x5ek atmel at91 at91sam9x5ek:AT91SAM9X5,SYS_USE_SPIFLASH
> at91sam9x5ek_mmc arm arm926ejs at91sam9x5ek atmel at91 at91sam9x5ek:AT91SAM9X5,SYS_USE_MMC
> at91sam9xeek_dataflash_cs0 arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9XE,SYS_USE_DATAFLASH_CS0
> diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h
> index 1317582..a034ed0 100644
> --- a/include/configs/at91sam9x5ek.h
> +++ b/include/configs/at91sam9x5ek.h
> @@ -178,6 +178,16 @@
> #define CONFIG_BOOTCOMMAND "sf probe 0; " \
> "sf read 0x22000000 0x100000 0x300000; " \
> "bootm 0x22000000"
> +#elif defined(CONFIG_SYS_USE_DATAFLASH)
> +/* bootstrap + u-boot + env + linux in data flash */
> +#define CONFIG_ENV_IS_IN_SPI_FLASH
> +#define CONFIG_ENV_OFFSET 0x4200
> +#define CONFIG_ENV_SIZE 0x4200
> +#define CONFIG_ENV_SECT_SIZE 0x210
> +#define CONFIG_ENV_SPI_MAX_HZ 30000000
> +#define CONFIG_BOOTCOMMAND "sf probe 0; " \
> + "sf read 0x22000000 0x84000 0x294000; " \
> + "bootm 0x22000000"
> #else /* CONFIG_SYS_USE_MMC */
> /* bootstrap + u-boot + env + linux in mmc */
> #define CONFIG_ENV_IS_IN_MMC
>
^ permalink raw reply [flat|nested] 6+ messages in thread
* [U-Boot] [PATCH] arm: at91sam9x5: add dataflash boot support
2012-12-09 21:35 ` Andreas Bießmann
@ 2012-12-09 21:49 ` Andreas Bießmann
0 siblings, 0 replies; 6+ messages in thread
From: Andreas Bießmann @ 2012-12-09 21:49 UTC (permalink / raw)
To: u-boot
Dear Bo Shen,
On 09.12.2012 22:35, Andreas Bie?mann wrote:
> Dear Bo Shen,
>
> On 07.12.2012 08:37, Bo Shen wrote:
>> Add dataflash boot support on at91sam9x5ek board
>
> sorry, but this patch do not apply cleanly on top of current
> u-boot-arm/master. It seems the mmc (SYS_USE_MMC) is missing there. Can
> you please rebase or provide the other patches?
... got it: http://patchwork.ozlabs.org/patch/196532/ it is awaiting
upstream via u-boot-mmc, sorry, this patch has to wait.
Best regards
Andreas Bie?mann
^ permalink raw reply [flat|nested] 6+ messages in thread
* [U-Boot] [PATCH] arm: at91sam9x5: add dataflash boot support
2012-12-07 7:37 [U-Boot] [PATCH] arm: at91sam9x5: add dataflash boot support Bo Shen
2012-12-09 21:35 ` Andreas Bießmann
@ 2013-01-09 16:17 ` Andreas Bießmann
2013-01-12 9:44 ` Andreas Bießmann
2013-01-12 12:25 ` Albert ARIBAUD
2 siblings, 1 reply; 6+ messages in thread
From: Andreas Bießmann @ 2013-01-09 16:17 UTC (permalink / raw)
To: u-boot
Dear Bo Shen,
Albert Aribaud agreed to apply this one to u-boot-arm/master for the
upcoming release.
On 07.12.2012 08:37, Bo Shen wrote:
> Add dataflash boot support on at91sam9x5ek board
>
> Signed-off-by: Bo Shen <voice.shen@atmel.com>
Acked-by: Andreas Bie?mann <andreas.devel@googlemail.com>
> ---
> boards.cfg | 1 +
> include/configs/at91sam9x5ek.h | 10 ++++++++++
> 2 files changed, 11 insertions(+)
Best regards
Andreas Bie?mann
^ permalink raw reply [flat|nested] 6+ messages in thread
* [U-Boot] [PATCH] arm: at91sam9x5: add dataflash boot support
2012-12-07 7:37 [U-Boot] [PATCH] arm: at91sam9x5: add dataflash boot support Bo Shen
2012-12-09 21:35 ` Andreas Bießmann
2013-01-09 16:17 ` Andreas Bießmann
@ 2013-01-12 12:25 ` Albert ARIBAUD
2 siblings, 0 replies; 6+ messages in thread
From: Albert ARIBAUD @ 2013-01-12 12:25 UTC (permalink / raw)
To: u-boot
Hi Bo,
On Fri, 7 Dec 2012 15:37:04 +0800, Bo Shen <voice.shen@atmel.com>
wrote:
> Add dataflash boot support on at91sam9x5ek board
>
> Signed-off-by: Bo Shen <voice.shen@atmel.com>
> ---
> boards.cfg | 1 +
> include/configs/at91sam9x5ek.h | 10 ++++++++++
> 2 files changed, 11 insertions(+)
>
> diff --git a/boards.cfg b/boards.cfg
> index 70a1569..e799d9b 100644
> --- a/boards.cfg
> +++ b/boards.cfg
> @@ -97,6 +97,7 @@ at91sam9m10g45ek_nandflash arm arm926ejs at91sam9m10g45ek atmel
> at91sam9rlek_dataflash arm arm926ejs at91sam9rlek atmel at91 at91sam9rlek:AT91SAM9RL,SYS_USE_DATAFLASH
> at91sam9rlek_nandflash arm arm926ejs at91sam9rlek atmel at91 at91sam9rlek:AT91SAM9RL,SYS_USE_NANDFLASH
> at91sam9x5ek_nandflash arm arm926ejs at91sam9x5ek atmel at91 at91sam9x5ek:AT91SAM9X5,SYS_USE_NANDFLASH
> +at91sam9x5ek_dataflash arm arm926ejs at91sam9x5ek atmel at91 at91sam9x5ek:AT91SAM9X5,SYS_USE_DATAFLASH
> at91sam9x5ek_spiflash arm arm926ejs at91sam9x5ek atmel at91 at91sam9x5ek:AT91SAM9X5,SYS_USE_SPIFLASH
> at91sam9x5ek_mmc arm arm926ejs at91sam9x5ek atmel at91 at91sam9x5ek:AT91SAM9X5,SYS_USE_MMC
> at91sam9xeek_dataflash_cs0 arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9XE,SYS_USE_DATAFLASH_CS0
> diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h
> index 1317582..a034ed0 100644
> --- a/include/configs/at91sam9x5ek.h
> +++ b/include/configs/at91sam9x5ek.h
> @@ -178,6 +178,16 @@
> #define CONFIG_BOOTCOMMAND "sf probe 0; " \
> "sf read 0x22000000 0x100000 0x300000; " \
> "bootm 0x22000000"
> +#elif defined(CONFIG_SYS_USE_DATAFLASH)
> +/* bootstrap + u-boot + env + linux in data flash */
> +#define CONFIG_ENV_IS_IN_SPI_FLASH
> +#define CONFIG_ENV_OFFSET 0x4200
> +#define CONFIG_ENV_SIZE 0x4200
> +#define CONFIG_ENV_SECT_SIZE 0x210
> +#define CONFIG_ENV_SPI_MAX_HZ 30000000
> +#define CONFIG_BOOTCOMMAND "sf probe 0; " \
> + "sf read 0x22000000 0x84000 0x294000; " \
> + "bootm 0x22000000"
> #else /* CONFIG_SYS_USE_MMC */
> /* bootstrap + u-boot + env + linux in mmc */
> #define CONFIG_ENV_IS_IN_MMC
Applied to u-boot-arm/master, thanks!
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2013-01-12 12:25 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-12-07 7:37 [U-Boot] [PATCH] arm: at91sam9x5: add dataflash boot support Bo Shen
2012-12-09 21:35 ` Andreas Bießmann
2012-12-09 21:49 ` Andreas Bießmann
2013-01-09 16:17 ` Andreas Bießmann
2013-01-12 9:44 ` Andreas Bießmann
2013-01-12 12:25 ` Albert ARIBAUD
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox